Xingchang K8 Aurora k Song Speaker User Manual
- June 16, 2024
- Xingchang
Table of Contents
User Manual
Aurora k-song speaker
Product Declaration
Thank you for purchasing and using Star Singing K8. Before using this product, please carefully read the product manual and check the accessories. This will help you better use this product. Please keep the product and product manual properly and operate strictly according to the requirements. Our company has carefully reviewed the product manual and cannot guarantee that it is completely free from any errors or omissions. However, the images in our promotional advertisements are for reference only. If any individual images do not match the actual display of the product, please refer to the actual product. In order to provide better services, our company reserves the right to update and improve the products and software programs described in this product manual at any time without prior notice.
Packaging List
| ITEM NAME | number |
|---|---|
| Audio main body | *1 |
| microphone | *1 (single person) |
| microphone | *2 (Double) |
| Charging+data cable | *1 |
| instructions | *1 |
Specification parameters
Product size：20cm11cm14cm
Speaker with built-in battery:3.7V/3000Ma
Bluetooth version：5.0
Speaker charging:5V/2A
Frequency Response ：30Hz—18KHz
Signal-to-noise ratio:≥90DB
Nominal charging time: approximately 3 hours
working temperature：-10℃～45℃
Storage temperature： -20℃～60℃
Rated consumption power：＜15W
Rated consumption current：＞3A
Speakerspecification: 20W 3 inch full frequency speaker+maze guidance system
product use
1.loudspeaker box
-
Clock area: Display the current time
-
Sound effect mode area: The illuminated sound effect represents the currently selected sound effect (only enabled)After the microphone, it will light up, and this area will not be displayed in listening mode
-
Bluetooth indicator light: Bluetooth terminated, permanently lit after connection, turned off after entering U mode
-
Battery/charging indicator light: Normal battery. This light remains on for along time, and there will below battery after low battery Voice prompt, power off state enters charging state. This light flashes and remains on after being fully charged
-
Music volume knob: Rotate the music volume to the left to decrease,and rotate it to the right Increase music volume
-
Microphone volume knob: Rotate the microphone volume to the left to decrease, and rotate the microphone volume to the right to increase
-
on/off/sound effect switch button: Long press for 3 seconds to turn on/off, short press to switch K song sound effect
-
Light effect switch button: Short press to switch light effects
-
AUX/live streaming port: Use 4 3.5mm connecting cables for audio input or live streaming connection
-
Charging/OTG port: Standard charging cable for charging, or OTG for connecting to a computer/phone
Warning! The product contains lit hium batteries : 1. It is p rohi bit ed to dis assemble, collide, squeeze or put into fire; 2 . If seve reswelling occurs , do not continue to use ; 3 . Do not place in a high-tem perature en vironm ent;
2.microphones
-
Switch/mode switch button:
Long press to switch the microphone, short press to switch sound effect modeStatus light: Fast flashing when not connected, permanently lit after connection indicates that the speaker has been connected and the m icrophonhas entered low The red light will flash when the battery is fully charged, and the red light will remain on when charging the microphone. It will turn off when fully charged -
Volum e up/down original singing button: Short press the microphone volume up one level, long press to turn on/off the original singing function
-
Volum e reduction/dodge reduction: Short pres s the microphone volume to decrease by one level, long press to turn on/off the dodge function
-
Radio port
-
Charging port: Use type-c charging cable to charge the microphone
Manufacturer Information
Brand: Xingchang Product model: K8
Product Name: Aurora k-song speaker
Manufacturer: Shenzhen Xingchang Technology Co., Ltd
Production address: 9th floor, Building A, Nanchang Jianyu Second
Industrial Zone, Gucheng 1st Road, Bao’an
District, Shenzhen, Guangdong Province
Executive standard: GB8898-2011
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.