ILVE INDD94 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD User Guide

June 7, 2024
ILVE

ILVE INDD94 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD User Guide
ILVE INDD94 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT
HOOD

Instructions

Using decades of experience in manufacturing range hoods meets our innovative induction cooktop technology.

Functionality

Designed with a closing flap, that, when in operation allows for  optimum efficiency and when closed, stops anything accidentally falling inside and also prevents odours from escaping.

ILVE INDD94 90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD User Guide
Functionality

High-quality materials

The flap’s outer surface is made from the same glass as the hob, creating a seamless look. All internal ducting components are made from stainless steel.

Easy cleaning

The grease filter and the steel drip pan designed to catch grease  and liquids can be lifted out even with the flap in place. The glass flap can also be removed completely to make it easier to clean inside.

Safety

All liquids, including condensation, are collected in an internal tray complete with drain valve. An electronic sensor warns when the tray is full and, for safety reasons, stops motor operation until it has been emptied.

Safety

Thoughtful motor location

The motor is located in the plinth, away from the user, making it quieter and easier for the induction top to be serviced without having to remove the hob from the bench top.

motor location

Adaptability and design freedom

The product can be installed in any base unit measuring at least 90cm wide and 60cm deep. It is telescopic in both height and depth and, for deeper base units, the motor can easily be rotated and located at the back.

Induction hob installation

Induction hob installation

The induction cook top can be installed in a non-flush or flush position.

Bridge zones

With this function you can to manage two larger areas of equal  size. The two zones are activated at the same time and controlled simultaneously.

Residual heat indicator

The appliance is equipped with the residual heat indicator. The cooking zone does not heat up directly, but through the return heat transmitted by the pan. After switching off the zone, the display shows a ‘H’ illuminated and, as long as it is active, you can use it to heat up or defrost food.

Standard Option – Cooktop Colour

  • Black Glass
    Black Glass

90CM INDUCTION COOKTOP WITH INTEGRATED DOWNDRAFT HOOD

Pause function and recall
By touching a key both the heating and the timer are locked, by touching the same key the initial conditions are restored.

Pause function and recall

Pots detector
If there are no pots on the cooking zone, when the appliance is switched on heat will not be activated. If, in 10 minutes time, you place the pan on the cooking zone, the zone will detect it and switches on to the set level. When you remove the pan from the cooking area, the power supply stops. If you place a pot with a smaller diameter on the cooking zone, the zone will use only the energy needed to heat it.

Boost Mode
Using this mode will speed up the heating process for fast cooking.
Thanks to the additional power, even large quantities of food can be heated quickly. After activation, the additional power is active for 10 minutes, then it automatically switches to cooking level 9.

Fast automatic heating
This function preheats the zone at maximum temperature in order to quickly bring it to the desired temperature. After a defined time, the cooking level will return to the previously set level.

Fast automatic heating

Motor Dimension

  • Front Motor
    Front Motor

  • Rear Motor
    Rear Motor

FINISH

  • Black ceramic glass

FEATURES

  • Touch control operation
  • 9 power levels
  • Pause & Recall mod
  • Keep warm option
  • Automatic pot detection
  • Fast automatic heating will reach cooking temperature quicker
  • Minute minder: facilitates a timer to alert cooking time and over cooking
  • Open & Close hood flap made from black glass
  • Easy removable catchment tray
  • Creative motor design allows for multiple installation types without the compromise of kitchen space.

SAFETY

  • Child safety loc
  • Overheat safety switch off & Operating time limiter
  • Automatic pan detection
  • Residual heat indicator (H)

CLEANING & ACCESSORIES

  • Easy clean surface

ZONES

  • 4 cooking zones
  • Boost mode
  • Zone bridging option
  • 2 x large rectangle zones
  • Power: 1500W – 200W

HOOD ASPIRATION SYSTEM

  • Maximum airflow (IEC 61591) 684 m3/h
  • Pressure (Pa):560
  • Motor Power (W): 275
  • Noise level at maximum speed db(A):68
  • Touch controls
  • Delayed switch off timer
  • Filter replacement alarm
  • Filter cleaning reminder
  • Optional Plasma filter model is available*
  • Charcoal Filter kit is available from ILVE. Code: E005KMP010301

POWER CONSUMPTION

  • Power requirement: Hard Wired
  • Total electrical load: 7.2kW

Important IconCooktop

  • EAN code: INDD94
  • Product Size: 860W x 520D x 8460-1040H
  • Cutout Size: (benchtop): 840W X 500D

FOLLOW US

Instagram Icon /ilve_appliances/
Facebook Icon /ILVEappliances
twitter Icon /ILVE_appliances
YouTube Icon /ILVEappliances

Australia National Telephone Number 1300 MYILVE (694 583) New Zealand Telephone Number 0508 458 369 ILVE showrooms are open daily from 9am- 5pm and Saturdays 10am-4pm

NSW & ACT (Head Office)
48-50 Moore Street
Leichhardt
F 02 8569 4699

QLD
1/42 Cavendish Road
Coorparoo
F 07 3397 0850

WA & NT
Unit 10/55 Howe Street
Osborne Park
F 08 9201 9188

New Zealand
PO Box 11.160
Sockburn Christchurch
F 03 344 5906

DISCLAIMER

Eurolinx PTY LTD, trading as ILVE Appliances, is continually seeking ways to improve the design specifications, aesthetics and production techniques of its products. As a result alterations to our products and designs take place continually. Whilst every effort is made to produce information and literature that is up to date, this brochure should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular product. Product dimensions indicated in our literature is indicative only. Actual product only should be used to define dimension cutouts. Distributors, and retailers are not agents of ILVE Appliances and are not authorized to bind ILVE Appliances by any express or implied undertaking or representation.

  • Pictured: with front & rear location motor
    front & rear location motor

  • Pictured: ducted version
    ducted version

  • Pictured: in-recirculated mode
    in-recirculated mode

  • Pictured: ducted with plasma filter
    ducted with plasma filter

Important Icon For installation specifications, please consult with ILVE. For optimum installation, we recommend using the actual product as the best guide.

Filtering mode
Turning into filtering mode is very easy and affordable. A regenerable active charcoal filter kit is available and can be inserted into the base

ilve.com.au

Company Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals