ULINE H-3454 Stainless Steel Wall Mount Sanitary Napkin Receptacle Instruction Manual
- June 7, 2024
- ULINE
Table of Contents
ULINE H-3454 Stainless Steel Wall Mount Sanitary Napkin Receptacle
TOOLS NEEDED
Drill
|
Drill Bit
|
Phillips Screwdriver
|
Level
|
Tape Measure
---|---|---|---|---
MOUNTING INSTRUCTIONS
NOTE: Mounting hardware is not included with this item. Ensure that
proper mounting hardware is used for appropriate wall composition.
NOTE: Recommended mounting height is approximately equal to toilet tissue
dispenser.
-
Hold up receptacle to desired location and mark two holes on wall where screws will be inserted. ( See Figure 1 )
-
Drill into wall at two marked locations with appropriate-sized drill bit. Insert wall anchors if necessary.
-
Hold receptacle over previously drilled holes and insert screws.
LINER LOADING INSTRUCTIONS
- Open top of receptacle.
- Place an open liner (S-15960) down into receptacle.
LINER REMOVAL INSTRUCTIONS
-
Open top of receptacle. ( See Figure 2 )
-
Carefully pinch both sides of the liner and pull up.
Dispose of liner into a trash container.
Documents / Resources
|
ULINE H-3454 Stainless Steel Wall Mount Sanitary Napkin
Receptacle
[pdf] Instruction Manual
H-3454, Stainless Steel Wall Mount Sanitary Napkin Receptacle
---|---