ADVANTECH WISE-4012E 6-ch Input/Output IoT Wireless I/O Module for IoT Developers User Guide
- June 7, 2024
- Advantech
Table of Contents
WISE-4012E
6-ch Input/Output IoT Wireless I/O
Module for IoT Developers
Introduction
The Advantech WISE IoT Developer Kit is a complete hardware & software
solution to help users develop IoT applications and simulate their projects in
the simplest way. The WISE IoT Developer Kit provides everything you need to
get going: a WISE-4012E 6-ch universal input or output wireless Ethernet I/O
module, and developer kit including WebAccess 8.0 with open interfaces for the
intelligent application developer, extension board for simulating sensor
status, a micro USB cable for power input, and a screwdriver for wiring. The
WISE4012E has an integrated Wi-Fi interface with AP mode and web configuration
which can be accessed by mobile device directly.
Data can be logged in the I/O module and then automatically pushed to the
file-based cloud.
Features
- 2.4 GHz IEEE 802.11b/g/n WLAN
- 2-ch 0 ~ 10V Input, 2-ch DI, and 2-ch Relay Output
- Includes WebAccess with demo project for developer
- Includes extension board for simulating sensor status
- Includes micro USB cable for power input
- Supports Modbus/TCP with RESTful web service
- Supports wireless client and server mode that can be accessed directly without AP or router
- Supports mobile device web configuration with HTML5 without the platform limitation
- Supports file-based cloud storage and local logging with timestamp
Product Concept: Data A-P-P
IoT Developer Kit
- WISE-4012E (x1)
- Extension Board (x1)
- USB Cable (x1)
- Screwdriver (x1)
- WebAccess (x1)
Application Scenario 1
Connect to end devices
Application Scenario 2
Connect to an extension board
Specifications
Voltage Input
Channel| 2
Resolution| 12-bit
Sampling Rate| 10 Hz (Total)
Accuracy| ±0.1 VDC
Input Type and Range| 0 ~ 10 V
Input Impedance| 100 kΩ
Digital Input
Channels| 2
Logic level| Dry Contact 0: Open 1: Close to GND
Supports 3 kHz Counter Input (32-bit + 1-bit overflow)
Keep/Discard Counter Value when Power-off
Supports 3 kHz Frequency Input
Supports Inverted DI Status
Relay Output
Channels| 2 (Form A)
Contact Rating (Resistive Load)| 120 VAC @ 0.5 A
Isolation (b/w coil & contacts)| 30 VDC @ 1A
Relay On Time| 1,500 Vrms
Relay Off Time| 10 ms
Insulation Resistance| 7 ms
Maximum Switching| 1 GΩ min. @ 500 VDC
Supports Pulse Output| 60 operations/minute
Supports High-to-Low and Low-to-High Delay Output
Environment
Operating Temperature| -25 ~ 70°C (-13 ~ 158°F)
Storage Temperature| -40 ~ 85°C (-40 ~ 185°F)
Operating Humidity| 20 ~ 95% RH (non-condensing)
Storage Humidity| 0 ~ 95% RH (non-condensing)
General
WLAN| IEEE 802.11b/g/n 2.4GHz
Connectors| Plug-in screw terminal block (I/O)
Watchdog Timer| System (1.6 second) and Communication (programmable)
Certification| CE, FCC, R&TTE, NCC, SRRC, RoHS, ANATEL
Dimensions (W x H x D)| 80 x 139 x 25 mm
Enclosure| PC
Power Input| Micro-B USB 5 VDC
Power Consumption| 1.5 W @ 5 VDC
Supports User-Defined Modbus Address
Supports Data Log Function| Up to 10,000 samples with timestamp
Supported Protocols| Modbus/TCP, TCP/IP, UDP, DHCP, and HTTP, MQTT
Supports RESTful Web API in JSON format
Supports Web Server in HTML5 with JavaScript & CSS3
Supports System Configuration Backup and User Access Control
Ordering Information
| WISE-4012E-AE-WA | WISE-4012E IoT Developer Kit with WebAccess |
|---|
Advantech WebAccess 8.0
WebAccess Cloud Architecture
WebAccess is a 100% web-based HMI and SCADA software with private cloud
software architecture. WebAccess can provide large equipment vendors, SIs, and
Enterprises access to and manipulation of centralized data to configure,
change/update, or monitor their equipment, projects, and systems all over the
world using a standard web browser. Also, all the engineering works, such as
database configuration, graphics drawing, and system
management and the troubleshooting can be operated remotely. This can
significantly increase the efficiency of maintenance operations and reduce
maintenance costs.
Business Intelligence Dashboard
WebAccess 8.0 provides an HTML5 based Dashboard as the next generation of
WebAccess HMI. System integrators can use Dashboard Editor to create the
customized information page by using analysis charts and diagrams which are
called widgets. Ample widgets have been included in the built-in widget
library, such as trends, bars, alarm summary, maps…etc. After the dashboard
screens have been created, the end-user can view the data by Dashboard Viewer
in different platforms, like Explorer, Safari, Chrome, and Firefox for a
seamless viewing experience across PCs, Macs, tablets, and smartphones.
Open Interfaces
WebAccess has three interfaces for different uses. First, WebAccess provides a
Web Service interface for partners to integrate WebAccess data into APPs or
application systems.
Second, a pluggable widget interface has been opened for a programmer to
develop their widget and run on WebAccess Dashboard. Last, WebAccess API, a
DLL interface for programmers to access the WebAccess platform and develop
Windows applications. With these interfaces, WebAccess can act as an IoT
platform for partners to develop IoT applications in various vertical markets.
Google Maps and GPS Tracking Integration
WebAccess integrates real-time data on each geographical site with Google Maps
and GPS location tracking. For remote monitoring, users can intuitively view
the current energy consumption on each building, production rate on each field
or traffic flow on the highway together with alarm status. By right-clicking
on Google Maps or entering the coordinate of the target, users can create a
marker for the target and associate the real-time data of three sites with a
display label. Furthermore, this function also integrates with GPS modules to
track the location of the marker in Google Maps and allows it to be used in-
vehicle systems.
Ample Driver Support
WebAccess supports hundreds of devices. In addition to Advantech I/Os and
controllers, WebAccess also supports all major PLCs, controllers, and I/Os,
like Allen Bradley, Siemens, LonWorks, Mitsubishi, Beckhoff, Yokogawa, etc.
WebAccess can easily integrate all devices in one SCADA. All of these device
drivers are integrated into WebAccess and free of charge. For a complete list
of WebAccess drivers, refer to webaccess.advantech.com.
Distributed SCADA Architecture with Central Database Server
SCADA nodes run independently of any other node. Each SCADA node communicates
to automation equipment using communication drivers supplied with Advantech
WebAccess.
The Project Node is a centralized database server of configuration data. A
copy of the database and graphics of all SCADA nodes is kept on the Project
Node. The historical data is also stored in the database in the project node.
Open Data Connectivity
Advantech WebAccess exchanges online data with 3rd party software in real-time
by supporting OPC UA/DA, DDE, Modbus, and BACnet Server/Client. It supports
SQL, Oracle, MySQL, and MS Access for offline data sharing.
Software Requirements
Operating System| Windows XP (SCADA Node Only), Windows 7 SP1, Windows 8
Professional, Windows Server 2008 R2 or later
---|---
Hardware| Intel Atom or Celeron. Dual-Core processors or higher recommended
2GB RAM minimum, more recommended
30GB or more free disk space
Wireless IoT Sensing Devices
All product specifications are subject to change without notice.
Online Download
www.advantech.com/products
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>