ULINE Fixed End Stops User Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE Fixed End Stops
TOOL NEEDED
ASSEMBLY INSTRUCTIONS
- Once conveyor is fully assembled, place end stop at the end of conveyor where packages will end.
- Line up holes on end stop with holes on end of conveyor. (See Figure 1)
- Insert bolt through holes and secure with nut.
Tighten nut and bolt fully. (See Figure 2)
NOTE: Use optional spacers to allow end stop to sit higher at conveyor end.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>