ULINE H-8547 Windpro Heavy Duty Snap Edge Sign Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-7041, H-8546, H-8547 WINDPRO® HEAVY DUTY SNAP EDGE SIGN
TOOL INCLUDED
PARTS
ASSEMBLY
NOTE: Remove washers and nuts before assembling the sign.
-
Insert screws on the bottom of the frame through the top of the base. (See Figure 1)
-
Place a two-holed washer onto screws at bottom of the base. (See Figure 2)
-
Slide nuts onto screws on the bottom of the base. (See Figure 3)
-
Use a wrench to tighten nuts around screws until snug against the washer. (See Figure 4)
CAUTION! Tighten carefully. When tightened too much, the base can crack.
ASSEMBLY CONTINUED
TO INSERT SIGN
-
Flip open snap edges. (See Figure 5)
-
Remove plastic cover. (See Figure 6)
-
Insert sign.
-
Replace the plastic cover to protect the sign. (See Figure 7)
-
Flip snap edges to closed position. (See Figure 8)
1-800-295-5510
uline.com
0621 IH-7041
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>