GIMA Bilancia Veterinaria Piccoli Animali Digital Small Pet Scale User Manual

: June 7, 2024
: GIMA

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS:
TECHNICAL SPECIFICATION
PRODUCT DESCRIPTION
CLEANING AND MAINTENANCE
ENVIRONMENTAL PROTECTION
GIMA WARRANTY CONDITIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GIMA Bilancia Veterinaria Piccoli Animali Digital Small Pet Scale User Manual

Thank you for purchasing the our product. We hope you will be satisfied with our product throughout its service life.

Please study the entire operating manual carefully before you start using the product. Keep the manual in a safe place for future reference. Make sure other people using the product are familiar with these instructions.

IMPORTANT SAFETY INSTRUCTIONS:

Make sure you follow the marked polarity of battery when inserting and replacing it.
If the appliance will be out of use for a longer time, remove the battery.
Do not leave the unit unattended when in use.
This appliance is not int ended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Use the product only for the intended purpose specified in the Operating Manual.
Use the unit only on a stable horizontal surface.
Before cleaning, assembly, or disassembly of the cover, switch the unit off and remove the battery!
Do not use abrasive or chemically aggressive substances for cleaning the unit.
Do not use the unit if it does not operate properly, or if it has been dropped, damaged or exposed to any liquids. Take the unit to an authorized service center fortesting and repair.
The unit is suit able for domestic use only. It is not designed for commercial operation.
Keep the unit away from heat sources, such as radiators, ovens etc. Do not expose the unit to direct sunlight or moisture.
Do not touch the unit with wet or damp hands.
The product is a fragile measuring device. Prevent it from crashing or falling.
Do not repair the appliance yourself. Contact an authorized service center.

FAILURE TO FOLLOW THE MANUFACTURER’ S INSTRUCTIONS MAY LEAO TO REFUSAL OF WARRANTY REPAIR!

TECHNICAL SPECIFICATION

Automatic hold function
Precision measuring system
Weight difference display function
Tare function
Low battery indicator (“Lo”)
Auto power off

Technical parameters

Voltage	2 pcs 3V CR2032 lithium batteries
Weighing range	20 kg
Weighing increments	5
Weighing units	Kg, Lb, St
Working /Storage temperature	20-25°C /15-40°C
Display size	LCD diameter = 8,0cm,3,15 inch

PRODUCT DESCRIPTION

Weighing surface (tray)
ON/OFF button
TARE button
Kg/Lb/St button
Display

OPERATING BUTTON

The scale can be switched on and off with the ON/OFF button (Push the button once.)
With the TARE button you can use the tare function. “0.00” appears on the display 2 seconds after pressing the button.
• Kg, Lb, St button is suitable to choose the required unit of measurement, the actual unit of measurement can be seen on the right side of the display.

USING THE SCALE

These scales run on 2pcs of replaceable lithium batteries. Remove the protective film before use (Fig. 1).
Before weighing a pets screw the tray to the measuring surface so the tray would stand stable.
By pressing the ON/OFF button once “0.00” appears on the display (Fig.2).
Place the pets on the scale. The measured weight is going to be displayed in a few seconds, and stored in the memory automatically. An “M” is displayed indicating the presence of data in the memory. After the next weighing the screen displays the measured weight and the difference between the measured weight and the previous weight by turns of 2 seconds. The lastly measured weight is automatically stored in the memory in case of both manual and automatic switching off.
By pressing the ON/OFF button once, the scale switches off. By not using the scale for 30 seconds it switches off automatically.

MEMORY FUNCTION

After switching on the scale, an “M” is dispalyed which means that the last measured weight is stored in the memory, so that the weigh difference could be displayed. If you do not need the displaying of weight difference, pressing the ON/OFF button quickly twice erases the data from the memory. At this time the “M” disappears from the display. Removal of battery erases the memory too.

ABOUT TARING

If you use not only the tray and the added weight (blanket, pillow etc.) is lighter than 5 kg, after pressing the TARE button the screen displays “0.00” and the maximal measurable weight will be 20 kg. If the added weight is heavier than 5 kg, after pressing the TARE button the screen displays “0.00” but the maximal measurable weight will be less than 20 kg (more precisely: 20 kg minus the added weight).

OTHER INFORMATION ON THE DISPLAY

If the “Lo” warning is displayed after switching on (Fig. 3), or there is nothing on the display, the battery is dead and has to be replaced.
DISPLAY

If the sign “ERR” appears on the display (Fig. 4.), it means that the scale is overloaded, in this case the weight must be reduced (an overload can cause sensor faults).
DISPLAY

If the message ”OUT2” appears on the display (Fig. 5.), it means sensor fault (after overloading or after a sudden, big dinamic load ). In this case, we have no warranty liability for the product.
DISPLAY

CLEANING AND MAINTENANCE

The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects as they may damage the unit’s surface!

Never clean the unit under running water, do not rinse it, and do not submerge it in water!

REPAIR AND MAINTENANCE

Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert service centre

ENVIRONMENTAL PROTECTION

Packaging materials and obsolete appliances should be recycled.
The transport box may be disposed of as sorted waste.
Polyethylene bags shall be handed over for recycling.

Disposal: The product must not be disposed of along with other domestic waste. The users must dispose of this equipment by bringing it to a specific recycling point for electric and electronic equipment.