VAXCEL W0425 Bari 1 Light Matte Black Contemporary Wall Sconce Instruction Manual

VAXCEL W0425 Bari 1 Light Matte Black Contemporary Wall Sconce

Product Information

The product is a light fixture with model numbers W0425 and W0427. The package includes a mounting plate unit, mounting screw, wire connector, bolt nut, backplate, glass shade, and a ring. The fixture requires a maximum 60W type B bulb (not included). The spare parts list includes an assembly kit, mounting plate unit, mounting screw, wire connector, bolt nut, and glass shade.

Product Usage Instructions

1. Before installation, consult local electrical codes for wiring and grounding requirements.

2. Turn off the power at the fuse or circuit box to avoid electrical shock while installing or servicing the fixture.

3. Unscrew the two bolt nuts (D) to remove the mounting plate unit (A) from the backplate.

4. Attach the mounting plate unit (A) to the outlet box using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary. Make sure that the two fixture mounting screws are lined up horizontally to make the fixture level.

5. Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on the backplate. Secure them with two bolt nuts (D).

6. Install a maximum 60W candelabra base bulb (not included).
   Check relamping label at socket area or packaging for maximum wattage allowed.

7. Attach the glass shade to the fixture with the ring.

8. Turn on the power at the fuse or circuit box.

ASSEMBLY AND INSTALLATION INSTRUCTIONS

W0425 / W0427

• WARNING : TO APOWER WHILE INSVOID RISK OF ELECTRICATALLING OR SEL R SHOCK, BE SURE VICING THIS FIXTURE.TO SHUT OFF

NOTE:

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.

Hardware Package (included)

Installation Steps

Turn off the power at fuse or circuit box.

1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate.

2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled fixture mounting screws if necessary.
   Note: Make sure that two fixture mounting screws are lined up horizontally to make the fixture level.

3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

   • Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
   • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
   • Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with green ground screw, then depending on local code, connect it to the house ground wire with the wire connector (C). Carefully put all of the wires back into the outlet box.

4.  Attach the backplate of the fixture to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws into set holes on backplate, then secure them with two bolt nuts (D).

5. Install 1 x 60W max. candelabra base bulb (not included). Check relamping label at socket area or packaging for maximum wattage allowed.

6. Attach the glass shade to the fixture with the ring.

Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.

Spare Parts List:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>