ULINE H-259,H-347,H-408 Stencil Machine Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-259, H-347, H-408
STENCIL MACHINE
STENCIL MACHINE ASSEMBLY
STENCIL MACHINE ASSEMBLY PARTS
| DESCRIPTION| QTY.| ULINE PART NO.| MFG. PART NO.
---|---|---|---|---
1| Screw. Phillips Truss Head| 5| ————| RP32A
2| Dial Blank, Manual| 1| 11-408-DIAL| RP32
3| Holder. Dial| 1| ————| RPO8
4| Screw, Set Square Head| 5| ————| RPO8B
5| Washer| 5| ————| RP1503C
6| Screw, Cap Head Hex| 5| ————| RPO4A
7| Wheel Assembly, Hand| 1| H-408-RPO7X| RPO7X
8| Hood (1/4″, 1/2″, 3/4′)| 1| ————| RP02-SHQ
8| Hood (11| 1| ————| RP02-R
9| Base, Shalt and Plate (1/2″)| 1| ————| RPO1X-H
9| Base, Shalt and Plate (3/4″)| 1| ————| RPO1X-S
9| Base, with Center Shaft (1″)| 1| ————| RPO1X-R
9| Base, Shalt and Plate (1/41| 1| ————| RPO1X-Q
10| Cap, Hex Head (1/4″, 1/2′, 3/4″)| 5| ————| RPO1A-SHQ
10| Cap, Hex Head (1″)| 5| ————| RPO1A-R
11| Spacing Button| 2| H-347-45| RP45
FRONT ASSEMBLY
| # | DESCRIPTION | QTY. | ULINE PART NO. | MFG. PART NO. |
|---|---|---|---|---|
| 1 | Hood (1/4″, 1/2″, 3/4″) | 1 | ————- | RP02-SHQ |
| 1 | Hood (1″) | 1 | ————- | RP02-R |
| 2 | Nut, Hex | 5 | H-259-22A | RP22A |
| 3 | Washer, Lock Internal Tooth | 5 | H-259-22B | RP22B |
| 4 | Stud, Spring | 1 | H-347-STDSPR | RP37 |
| 5 | Washer | 5 | ————- | RP35SW |
| 6 | Spring, Centering Arm | 2 | H-347-SCA | RP3OS |
| 7 | Screw, Set Square Head | 5 | ————- | RP47 |
| 8 | Pin, Release Button | 1 | ————- | RP18B |
| 9 | Arm Liner, Assembly Centering | 1 | H-259-35A | RP35A |
| 10 | 0-Ring | 5 | H-259-35B | RP35B |
| 11 | Arm Assembly, Centering (1/4″, 1/2″, 3/4″) | 1 | ————- | RP30X-SHQ |
| 11 | Arm Assembly, Centering (1″) | 1 | H-259-30XSHQ | RP30X-R |
| 12 | Washer | 5 | ————- | RP35W |
| 13 | Screw, Cap Hex Head | 5 | ————- | RPO9A |
| 14 | Spring, Handle | 1 | H-259-RP37S | RP37S |
| 15 | Rocker Assembly, Centering | 1 | ————- | RP28 |
| 16 | Plunger Assembly | 1 | ————- | RP31 |
| 17 | Stripper Assembly (1/4″, 1/2″, 3/4″, 1″) | 1 | ————- | RP33 |
| 18 | Bushing, Feed Wheel | 4 | H-259-RP23A | RP23A |
| 19 | Wheel, Feed Right | 5 | H-259-23R | RP23R |
| 20 | Washer, Feed Wheel | 5 | H-408-RP23W | RP23W |
| 21 | Screw, Slot Flat Head | 5 | ————- | RP38 |
| 22 | Wheel Assembly, Feed Left (1/4″) | 1 | H-259-231LBQ | RP23LB-Q |
| 22 | Wheel Assembly, Feed Left (1/2″) | 1 | H-347-RP23LB | RP23LB-H |
| 22 | Wheel Assembly, Feed Left (3/4″) | 1 | H-259-RP23LB | RP23LB-S |
| 22 | Wheel Assembly, Feed Left (1″) | 1 | H-259-23LBR | RP23LB-R |
| 23 | Washer, Sprag Spring | 5 | ————- | RP1611-AR |
| 24 | Nut | 1 | ————- | RP47A |
| 25 | Washer, Lock Integral Tooth | 1 | ————- | RP47B |
| 26 | Stop, Spacing | 2 | H-259-RP44 | RP44 |
| 27 | Stud, Centering Rocker | 1 | ————- | RP29 |
| 28 | Washer, Link Pin Right | 5 | ————- | RP13A |
| 29 | Handle, Assembly Operating (1/4″, 1/2″, 3/4″, 1″) | 1 | H-259-HANDLE |
RP20X-R
30| Shaft Handle| 1| H-259-22| RP22
31| Washer, Lock Internal Tooth| 5| H-259-21| RP21
32| Screw, Phillips Pan Head| 5| H-259-06C| RPO6C-R
33| Ring, Lock| 5| H-259-RP3157| RP3157
34| Follower, Spacing Cam| 2| H-259-RP24| RP24
35| Link (1/4″, 1/2″, 3/4″)| 1| ————-| RP12-SHQ
35| Link (1″ Machine)| 1| ————-| RP12-R
36| Cover Plate, Front| 1| ————-| RP43
37| Screw, Phillips Pan Head| 5| ————-| RP43A
38| Screw, Cap Hex Head| 5| ————-| RP36B
39| Cam Assembly, Spacing (1/4″)| 1| ————-| RP25-Q
39| Cam Assembly, Spacing (1/2″)| 1| H-347-RP25H| RP25-H
39| Cam Assembly, Spacing (3/4″)| 1| ————-| RP25-S
39| Cam Assembly, Spacing (1″)| 1| H-259-RP25R| RP25-R
40| Spring, Spacing Finger| 2| H-259-RP25S| RP25S
41| Bushing, Spacing Cam| 2| H-347-RP-36| RP36
42| Cam Assembly, Centering| 1| ————-| RP10
43| Rocker Assembly| 1| ————-| RP14
44| Stud, Spring Spacing| 5| ————-| RP25E
45| Nut, Hex Jam| 5| ————-| RP47A
46| Washer, Lock Integral Tooth| 5| ————-| RP47B
47| Screw, Set (1/4″, 1/2″, 3/4″)| 5| ————-| RP48-SHQ
47| Screw, Set (1″)| 5| ————-| RP48-R
48| Grip, Handle 7/8″ Flangeless| 1| H-259-GRIP| RP27944
49| Washer| 5| ————-| RPTC19
BASE ASSEMBLY
BASE ASSEMBLY PARTS
| # | DESCRIPTION | QTY. | ULINE PART NO. | MFG. PART NO. |
|---|---|---|---|---|
| 1 | Washer | 5 | ————- | RP19W2 |
| 2 | Washer | 5 | ————- | RP19W1 |
| 3 | Shaft, Center (1/4°, 1/2″, 3/4″, 1″) | 1 | ————- | RP33101 |
| 4 | Wick, Center Shaft 011 | 5 | ————- | RP19A |
| 5 | Nut | 5 | ————- | RP51N |
| 6 | Foot, Rubber | 1 | ————- | RP77 |
| 7 | Washer | 5 | ————- | RP1503C |
| 8 | Screw. Cap Hex Head | 5 | ————- | RPI503B |
| 9 | Screw, Round Head Slotted | 5 | ————- | RP15G |
| 10 | Bar, Adjustment | 1 | ————- | RP15C |
| 11 | Spacer | 5 | ————- | RP15D |
| 12 | Roller Assembly, Lower Feed | 1 | H-259-RP15 | RP15 |
| 13 | Washer, Lock Internal Tooth | 1 | ————- | RP38B |
| 14 | Nut | 5 | ————- | RP38A |
| 15 | Screw, Slotted | 5 | ————- | RP38 |
| 16 | Washer | 5 | ————- | RP16W |
| 17 | Collar, Spring Stud | 5 | ————- | RP16E |
| 18 | Spring, Lower Feed Roll | 2 | H-259-RLSPRG | RP16S |
| 19 | Stud, Spring | 2 | ————- | RP16D |
| 20 | Screw, Set Socket Flat | 5 | ————- | RP42 |
| 21 | Screw, Stop Pawl | 1 | H-347-RP18A | RP18A |
| 22 | Spring, Release Button | 2 | H-347-RP175 | RP17S |
| 23 | Pawl, Stop | 1 | H-347-RPI8 | RPI8 |
| 24 | Nut, Hex Jam | 5 | H-347-RPOID | RPOID-SHQ |
| 25 | Shaft Assembly, Eccentric (1/4°, 1/2″, 3/4″) | 1 | H-347-RPI6 | RP16-SHQ |
| 25 | Shaft Assembly, Eccentric (1″) | 1 | H-259-SHAFTA | RPM |
| 26 | Cap, Eccentric Shaft Handle | 5 | H-347-RP16G | RP16G |
| 27 | Eccentric Shaft Stop Pin | 2 | H-347-RP16A | RP16A |
| 28 | Release Button Pin | 1 | H-347-RP186 | RP186 |
| 29 | Button, Release Shaft | 1 | H-259-SHAFT | RP17 |
| 30 | Base, with Shaft and Plate (1/4″) | 1 | ————- | RPOIX-Q |
| 30 | Base, with Shaft and Plate (1/2″) | 1 | ————- | RPM X-H |
| 30 | Base, with Shaft and Plate (3/4″) | 1 | ————- | RPOI X-S |
| 30 | Base, with Center Shaft (1″) | 1 | ————- | RPOIX-R |
| 31 | Plate, Table (1/4″) | 1 | ————- | RPOIPL-Q |
| 31 | Plate, Table (1/21 | 1 | ————- | RPOIPL-H |
| 31 | Plate, Table (3/4″) | 1 | ————- | RPOIPL-S |
| 32 | Screw, Phillips Flathead (1/4″, 1/2″, 3/41 | 5 | ————- | RPJ500-0011-008 |
| 33 | Nut, Hex Jam | 5 | ————————– | RP15N |
STENCIL MACHINE
CARRIAGE ASSEMBLY
| # | DESCRIPTION | QTY. | ULINE PART NO. | MFG. PART NO. |
|---|---|---|---|---|
| 1 | Carrier, Punch (1/4″, 1/2″, 3/4″) | 1 | ————- | RPO4-SHQ |
| 1 | Carrier, Punch (1″) | 1 | ————- | RPO4-R |
| 2 | Retainer, Spring | 5 | ————- | RP27 |
| 3 | Washer, Felt (1/4″, 1/2″, 3/4″) | 5 | ————- | RP78-SHQ |
| 3 | Washer, Felt (1″) | 5 | ————- | RP78-R |
| 4 | Spring, Punch (1/4″, 1/2″, 3/4″) | 5 | ————- | RP26S-SHQ |
| 4 | Spring, Punch (1″) | 5 | ————- | RP26S-R |
| 5 | Holder, Punch and Shank Assembly (1/4″, 1/2″, 3/4″) | 1 | H-347-PSA | RPO5X- |
SHQ
5| Holder, Punch and Shank Assembly (1″)| 1| ————-| RPOSX-R
6| Washer, Rubber (1/4″, 1/2″, 3/4″)| 5| ————-| RP26W-SHQ
6| Washer, Rubber (1″)| 5| ————-| RP26W-R
7| Punch and Die-Set of 40 1/4″ Characters| 1| ————-| RPQ5DP
7| Punch and Die-Set of 40 1/2″ Characters| 1| H-347-DIESET| RPH5DP
7| Punch and Die-Set of 40 3/4″ Characters| 1| H-408-API| RPS5DP
7| Punch and Die-Set of 40 1″ Characters| 1| ————-| RPRSDP
8| Screw, Punch (1/4″, 1/2″, 3/4″)| 5| ————-| RPO6B-SHQ
8| Screw, Punch (1″)| 5| ————-| RPO6B-R
9| Screw, Die (1/4″, 1/2″, 3/4″)| 5| ————-| RPO6C-SHQ
9| Screw, Die (1″)| 5| ————-| RPO6C-R
10| Washer, Felt| 5| ————-| RP79
11| Carrier, Die (1/4″, 1/2″, 3/4″)| 1| ————-| RP03-SHQ
11| Carrier, Die (1″)| 1| ————-| RP03-R
0621 PH-259
Documents / Resources
|
ULINE H-259,H-347,H-408 Stencil
Machine
[pdf] Installation Guide
H-259, H-347, H-408, Stencil Machine
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>