DIGITUS DN-70565 Wireless 11AC 600Mbps Dual Band USB 2.0 Adapter Installation Guide
- June 7, 2024
- DIGITUS
Table of Contents
Wireless 11AC 600Mbps Dual Band
USB 2.0 Adapter
Quick Installation Guide
DN-70565
Driver Installation
Please follow the following instructions to install your new wireless USB Adapter:
-
Insert the USB wireless network card into an empty USB 2.0 port of your computer when the computer is switched on. Never use force to insert the adapter, if you feel it’s stuck, flip the adapter over and try again.
-
The following message will appear on your computer, click ‘Cancel / Close’.
-
Insert the driver CD into your CD-ROM. You can see autorun screen below. if not, you can double click ‘autorun.exe’ on CD.
Click ‘Install Driver’ to start the installation procedure -
Installation descriptions showed. Click ‘ Next ’ to continue
-
Once the installation is finished the computer will be asked to reboot. you can click ‘ Finish ’ and reboot the computer to finish the installation of driver files
-
Insert the USB wireless network card into a USB 2.0 port of your computer, the system will find the new hardware and will install the drivers automatically.
-
After finishing driver installation, click adapter utility from your taskbar or programs folder. Click “available networks” , select the wireless access point you would like to connect and press the “Add to Profile” button.
-
Fill in the security information if any requirement, and then click “OK” to connect the wireless network.
-
Connected successfully. It will show the status screen.
The manual content may be changed. Please also refer to the latest version on the web shop.
Technical Description
Frequency Range:
2412MHz-2472MHz for 802.11b, g, n/HT20
2422MHz-2462MHz for 802.11n/HT40
5180MHz-5240MHz for 802.11a
5180MHz-5240MHz for 802.11ac VHT20
Transmit Power:
< 20 dBm EIRP for 2.4G WIFI
< 20 dBm EIRP for 5G WIFI
Hardware Version: V 2.0
Software Version: 1030.38
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany