DIGITUS DN-7072 300 Mbps Wireless Repeater / Access Point, 2.4 GHz + USB Charging Port User Guide

June 7, 2024
DIGITUS

DIGITUS DN-7072 300 Mbps Wireless Repeater / Access Point, 2.4 GHz + USB

Charging Port User Guide

Quick Installation Guide DN-7072

Getting started
  1.  Plug into the outlet (near the router) and waiting 40 seconds

  2. Join the wifi SSID: WIRELESS-XXXX by mobile phone.

  3. Scan the below QR code or enter 192.168.9.1 at address bar, then input Login: admin and Password: admin, you will get into the setup page.

  4. Select the language and click “Enter”.

  5. After entering the setting page, just select your home wifi router and input your home wifi router password (change ssid and password of extender if need), then click “Next”.

  6. Now you can join it to enjoy the internet

AP mode settings (Alternative)

  1.  Login web UI with web browser by entering http://wireless.repeater or IP 192.168.9.1 with a computer. (Default ID /password: admin)

  2.  Click on the settings button on the right corner. (This is not supported by smart phone)

  3. Click on Wireless Settings and set up a new ID and password (8 digits)

  4.  Press „Save above settings and reboot“

  5. Connect network uplink and wait for Internet LED red light off.

Technical Description

Frequency Range:                       2412 to 2472 MHz
Transmission Power:                  < 20 dBm
Hardware Version:                     V1.2
Software Version:                      V3.4.11

Frequently asked and answers
How do enter setup page again?
You can enter the setting page at anytime. (In case you can’t enter, have other methods: Re-plug the device and power it, on, use your mobile phone to connect SSID (WIRELESS-XXXX) and none password. Then input http://wireless.repeater to enter into setup page, input username: admin and password: admin.
How do change SSID, password?
After entering the setting page, you can modify any SSID and password you want in the text box. Please click “Save above setting and reboot” after you complete the modification.
How do go back to factory setting?
Please hold the Reset Button for 5 seconds to reset the device.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH Auf dem Schüffel 358513 Lüdenscheid Germany

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals