tp-link 4G LTE Mobile Wi-Fi Installation Guide

**tp-link 4G LTE Mobile Wi-Fi Installation Guide

**

Screen Display

Home Screen
Press to enter the menu screen.

Menu Screen
Press to switch between icons.

The screen display will automatically turn off after being idle for a while. To turn it on again, press the or MENU button

Install the SIM Card and Battery

• Remove the back cover
  

• Install your SIM card.
  SIM card requirement: If you have a micro SD card, you can insert it into the SD card slot for storage and media sharing.
  

• Install the provided battery
  

• Replace the back cover.
  

Connect to the Internet

• Power on the Mobile Wi-Fi.
  Press and hold the Power button  until the welcome screen appears.
  

  • If you cannot access the internet, refer to FAQ > Q1.
  • By default, Power Saving is enabled and the Mobile Wi-Fi will turn off Wi-Fi when no wireless devices are connected to it for 10 minutes. To resume the Wi-Fi connection, press the  or MENU button.

• Connect your smart device to the Mobile Wi-Fi.
  To view the SSID and password, press the MENU button to switch to the Device Info icon, then press the Power button to enter the screen.
  

• Enjoy the internet!
  
  

Managing Your Mobile Wi-Fi

Manage your Mobile Wi-Fi using any of the methods below. You can customize Wi- Fi settings, block Wi-Fi devices and more.

tp-Mi-Fi App

1. Get the tpMiFi app from App Store or Google Play, or by scanning the QR code.
   Apple Store
   
   Google Play
   
   scanning the QR code
   

2. Connect your wireless device to the Mobile Wi-Fi.

3. Launch the tp-Mi-Fi app and enter admin to log in.

Web Management Page

1. Connect your wireless device to the Mobile Wi-Fi. If it is a computer, make sure it is set to obtain an IP address automatically.
2. Launch a web browser and visit http://tplinkmifi.net or http://192.168.0.1. Enter admin to log in.

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

Charging Your Mobile Wi-Fi

Method 1
Via a Wall Outlet (Recommended)

Method 2
Via a Computer

• When on the battery icon disappears, the Mobile Wi-Fi is fully charged.
• The power adapter is not provided by TP-Link.

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the internet (one of the following messages appears on the home screen)?

A1. PIN Required

• Your SIM card is PIN protected. Visit the web management page  (http://tplinkmifi.net) on your phone, enter admin to log in, then enter the PIN provided by your mobile carrier.

A2. No SIM Card

• Power off the Mobile Wi-Fi and reinstall your SIM card.

A3. No Service

• Verify that your SIM card is an LTE or WCDMA SIM card.
• Verify that your SIM card is in your carrier’s service area and has sufficient credit.
• Visit the web management page (http://tplinkmifi.net) on your phone, and enter admin to log in. Go to Dial-up, tap View profile details, and verify that the parameters (i.e. APN, username and password) provided by your mobile carrier are correct. If they are not correct, return to the Dial-up page and create a new profile with the correct information.

A4. icon

• Enter the Menu screen, go to Data Roaming, and turn on Data Roaming.

Q2. How do I restore the Mobile Wi-Fi to its factory default settings?
A. With the Mobile Wi-Fi powered on, remove the cover, then use a pin to press and hold the Reset button until “Power Off” appears on the screen.
Note: Restoring the device to its factory defaults will clear all your settings.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.
  CAUTION!

• Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

• Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

• Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  CAUTION!

• Risk of explosion if the battery is replaced by an incorrect type.

References

• Trying to configure the MiFi? | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>