ULINE Big and Tall Sled Base Chair with Arms H-5059 Instructions
- June 7, 2024
- ULINE
Table of Contents
H-5059
BIG AND TALL SLED BASE CHAIR WITH ARMS
1-800-295-5510
uline.com
TOOL NEEDED
PARTS
| Seat Cushion x 1
---|---
| Back Cushion x 1
| Leg with Armrest x 2
ASSEMBLY
-
Align leg mounting plates with holes on the bottom of the seat cushion. Use four M8 x 25 mm screws to secure loosely. Repeat on the opposite side. (See Figure 1)
NOTE: Do not tighten screws until assembly is complete.
-
Align back cushion with holes in back mounting plates. Use four M6 x 25 mm screws to secure loosely. (See Figure 2)
-
Use Phillips screwdriver to fully tighten all screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>