ULINE S-14528 Countertop Protection Tape Instruction Manual
- June 7, 2024
- ULINE
Table of Contents
ULINE S-14527, S-14528 Countertop Protection Tape Instruction Manual
1-800-295-5510
uline.com
IMPORTANT INFORMATION
The manufacturer and distributor warrant that this product is free from defects in material and workmanship under normal use in accordance with their instructions and specifications. Their sole responsibility for any breach in this warranty is to replace that quantity of the product not conforming to such warranty. The customer is required to provide prompt written notification to the manufacturer or distributor of any defect covered by this warranty. Return or other disposition of defective material will then be authorized.
The manufacturer and distributor assume no responsibility for any loss or damage caused by: (1) any modification made to the product, (2) use of a version of the product that has been previously used or reconditioned, or (3) the use of the product in a manner inconsistent with the manufacturer’s or distributor’s applicable instructions and specifications.
The warranty given hereunder is limited, and is given in lieu of any other express or implied conditions and warranties, including those implied by applicable law or merchantability, fitness for a particular purpose or use, and all such other conditions and warranties are hereby disclaimed.
APPLICATION INSTRUCTIONS
There are many variations in countertop surfaces which make it imperative that the user of this product determines its suitability. Special attention must be given to newly stained, top coated, finished or refinished countertops.
- Test the countertop protection film on a small inconspicuous area.
- Leave in place for 48 hours and then inspect to ensure there is no change to the countertop.
NOTE: This product is used for temporary surface protection during painting, remodeling, relocations or construction.
NOTE: The temporary usage period should not exceed 30 days. This product is not recommended for use in high humidity areas or for outdoor use.
Application can be made easier by locating the tab at the beginning of the roll. For best results, clean and dry countertop surface prior to application.
- Pull the first few inches of the film and press to the surface.
- Pull the roll over the desired coverage area.
- Apply pressure to the covered area to ensure the protective film remains in place.
Store this product in a dry place, not to exceed +100° or -40°F (+38° or -4°C).
0521 IS-14527
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>