ULINE H-3438 Universal Wall Switch Lockout Installation Guide
- June 7, 2024
- ULINE
Table of Contents
ULINE H-3438 Universal Wall Switch Lockout Installation Guide
PARTS
INSTALLATION
CHANGING DUAL-PURPOSE SWITCH SLIDES
- Slides have the words “TOGGLE” and “ROCKER” molded on opposite
-
When “TOGGLE” appears through the cover, the lockout device is set for a toggle-style switch. (See Figure 1)
-
When “ROCKER” appears through the cover, the lockout device is set for a rocker or paddle-style (See Figure 2)
-
To change between “TOGGLE” and “ROCKER,” apply firm pressure to remove Dual-Purpose Switch Slide from base. Flip the slide over and snap back into Repeat on second slide. (See Figure 3)
INSTALLATION ON SWITCH
-
Loosen or remove screws. Install wall switch lockout. Tighten screws (See Figures 4-5)
-
Move switch to either off or on position. Close cover. Apply safety padlock. (See Figure 6)
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>