Campfire Audio MAMMOTH Earphones User Guide
- June 7, 2024
- Campfire Audio
Table of Contents
Campfire Audio MAMMOTH Earphones
Fit Guide
Insert Mammoth into your ear with the cable facing forward and logo upright. Earphones are marked ‘L’ for left and ‘R’ for right on the inward facing wall of the housing. Wrap cable behind ear once earphone is positioned.
PARTS
- black pvd finished steel spout
- custom beryllium copper mmcx
- inlaid glow logo
- black tri-lobe screws
- machined aluminum body
- ‘frozen tundra’ anodized finish
Use Instructions
We designed your new earphones to bring you years of musical enjoyment
wherever you are. Below are a few guidelines that will help you get the most
from your experience with them. Your earphones come with a removable cable
that attaches via custom-made beryllium copper MMCX connectors. These increase
the life of the connection and extend the usable life of the earphone. It also
gives you the ability to select the perfect cable for each situation.
To remove your earphone’s cable:
- Holding your earphone, pull the cable in the direction parallel to the connection, holding it close to the connector.
- Avoid pulling the cable at an angle; this can damage the cable and earphones’ mmcx connectors.
- Don’t worry if this takes a bit of force to remove; we designed it for a secure connection to give you peace of mind.
Care Instructions
- To maintain the performance of the earphone to keep the openings clear of debris and wax. Use the clearing tool included with your earphones to remove any build-up that may occur.
- Each Campfire Audio earphone holds a sensitive transducer. We have designed and built them to withstand a working performer’s demands. But do note sudden shocks or impact to the shell can cause damage or alter the earphone’s transducer’s performance.
- Do your best to avoid excess moisture build-up on the surface and in the earphone body’s interior. Give the earphones time to air dry after listening sessions in humid conditions to preserve their superior performance.
- Note that extended listening periods at high listening levels can negatively impact your hearing over time. Please enjoy your earphones responsibly and be good to your ears.
Please note; damage to the earphone transducers or other components are not covered by the earphone’s warranty protection and are subject to a reasonable repair fee. Opening or changing the earphone body will damage the shell’s seal and alter your earphone’s precision tuning. It will also void the warranty of your earphone. We’re happy to help you with your earphone, so feel free to reach out to us if you have any questions.
Questions or comments? Please contact us: Support@campfireaudio.com
thank you for purchasing mammoth. nicely done.
learn more – visit us at campfireaudio.com
campfire audio® names and logos are protected by USA Copyright and trademark
and other global copyright protections
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>