Campfire Audio Holocene Earphones User Guide
- June 7, 2024
- Campfire Audio
Table of Contents
Specifications
Balanced Armature Earphone Design
Driver Units:
1 balanced armature driver (mid/low)
1 balanced armature driver (mid/low)
1 balanced armature driver (high)
+ Tuned Acoustic Expansion Chamber™
(T.A.E.C.)
spl: 94dB @ 6.99 mVrm s
earphone impedance: 5.4 ohm @ 1K
Frequency Response: 5Hz – 20kHz
Earphone Connector: beryllium copper mmcx
Acoustic Chambers: 3d printed Solid-Body
Accessories
‘SMOKY GLOW’ LITZ CABLE
Silver-plated copper Litz wire conductors in medical-grade PVC jacket with
glow over-molds 3.5mm stereo plug to custom beryllium copper mmcx Campfire
Audio Marshmallow tips (small, medium, large) Silicon Earphone Tips (small,
medium, large) + bonus featured earphone tips (various sizes) Earphone
Clearing Tool, Campfire Audio Pin Up-cycled Marine Plastic Zipper Case – Hand
Made in Portugal
Warranty
Holocene includes a 2-year limited liability product warranty covering
defects due to manufacturing and assembly.
For more information visit
campfireaudio.com/warranty
Fit Guide
Insert Holocene into your ear with the cable facing forward and logo upright. Earphones are marked ‘L’ for left and ‘R’ for right on the inward- facing wall of the housing. Wrap cable behind ear once earphone is positioned.
Designed and hand-assembled in portland, Oregon USA using globally sourced components
- BLACK PVD FINISHED STEEL SPOUT
- CUSTOM BERYLLIUM COPPER MMCX
- INLAID GLOW LOGO
- BLACK TRI-LOBE SCREWS
- MACHINED ALUMINUM BODY
- UMBER’ ANODIZED FINISH IEM-CFA-HLC
Use Instructions
WE DESIGNED YOUR NEW EARPHONES TO BRING YOU YEARS OF MUSICAL ENJOYMENT WHEREVER YOU ARE. BELOW ARE A FEW GUIDELINES THAT WILL HELP YOU GET THE MOST FROM YOUR EXPERIENCE WITH THEM.
YOUR EARPHONES COME WITH A REMOVABLE CABLE THAT ATTACHES VIA CUSTOM-MADE BERYLLIUM COPPER MMCX CONNECTORS. THESE INCREASE THE LIFE OF THE CONNECTION AND EXTEND THE USABLE LIFE OF THE EARPHONE. IT ALSO GIVES YOU THE ABILITY
TO SELECT THE PERFECT CABLE FOR EACH SITUATION.
To REMOVE YOUR EARPHONE’S CABLE:
- HOLDING YOUR EARPHONE, PULL THE CABLE IN THE DIRECTION PARALLEL TO THE CONNECTION, HOLDING IT CLOSE TO THE CONNECTOR.
- AVOID PULLING THE CABLE AT AN ANGLE; THIS CAN DAMAGE THE CABLE AND EARPHONES’ MMCX
- DON’T WORRY IF THIS TAKES A BIT OF FORCE TO REMOVE; WE DESIGNED IT FOR A SECURE
CONNECTION TO GIVE YOU PEACE OF
Care Instructions
TO MAINTAIN THE PERFORMANCE OF THE EARPHONE TO KEEP THE OPENINGS CLEAR OF DEBRIS AND WAX. USE THE CLEARING TOOL INCLUDED WITH YOUR EARPHONES TO REMOVE ANY BUILD-UP THAT MAY OCCUR.
EACH CAMPFIRE AUDIO EARPHONE HOLDS A
SENSITIVE TRANSDUCER. WE HAVE DESIGNED AND BUILT THEM TO WITHSTAND A WORKING
PERFORMER’S DEMANDS. BUT DO NOTE SUDDEN SHOCKS OR IMPACTS TO THE SHELL CAN
CAUSE DAMAGE OR ALTER THE EARPHONE’S TRANSDUCER’S PERFORMANCE.
Do YOUR BEST TO AVOID EXCESS MOISTURE BUILD-UP ON THE SURFACE AND IN THE
EARPHONE BODY’S INTERIOR. GIVE THE EARPHONES TIME TO AIR DRY AFTER LISTENING
SESSIONS IN HUMID CONDITIONS TO PRESERVE THEIR SUPERIOR PERFORMANCE.
NOTE THAT EXTENDED LISTENING PERIODS AT HIGH LISTENING LEVELS CAN NEGATIVELY
IMPACT YOUR HEARING OVER TIME. PLEASE ENJOY YOUR EARPHONES RESPONSIBLY AND BE
GOOD TO YOUR EARS.
PLEASE NOTE; DAMAGE TO THE EARPHONE TRANSDUCERS OR OTHER COMPONENTS IS NOT COVERED BY THE EARPHONES WARRANTY PROTECTION AND IS SUBJECT TO A REASONABLE REPAIR FEE. OPENING OR CHANGING THE EARPHONE BODY WILL DAMAGE THE SHELL’S SEAL AND ALTER YOUR EARPHONES PRECISION TUNING. IT WILL ALSO VOID THE WARRANTY OF YOUR EARPHONE. WERE HAPPY TO HELP YOU WITH YOUR EARPHONE, SO FEEL FREE TO REACH OUT TO US IF YOU HAVE ANY QUESTIONS.
QUESTIONS OR COMMENTS? PLEASE CONTACT US:
THANK YOU FOR PURCHASING HOLOCENE.
NICELY DONE.
LEARN MORE – VISIT US AT
CAMPFIRE AUDIO® NAMES AND LOGOS ARE PROTECTED BY USA COPYRIGHT AND TRADEMARK AND OTHER GLOBAL. COPYRIGHT PROTECTIONS
Documents / Resources
|
Campfire Audio Holocene
Earphones
[pdf] User Guide
Holocene Earphones
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>