BlueSky 8145 AIR QUALITY MONITOR User Manual
- June 5, 2024
- BLUESKY
Table of Contents
AIR QUALITY MONITOR
Quick Start Guide
Model 8145
What’s Included
Tools Needed
Connect Device to Wi-Fi
LED will pulse yellow when Wi-Fi setup mode is enabled*
- 90 sec time out. Cycle power to enter setup mode again
Connecting to monitor Wi-Fi hotspot
Scan Step 1 QR code on the device label 
Connecting monitor to Wi-Fi network
Scan Step 2 QR code on the device label Enter Wi-Fi network SSID and password
The connection process will follow this sequence
| |
---|---|---
Pulse Yellow| Set up Mode|
Pulse White| Connecting|
Pulse Blue| Connected| Connecting
Solid Blue| Connected| Connected
Solid White| No
Connection| No
Connection
Success
LED will be solid blue
Trouble Shooting:
LED Solid White
A) Incorrect Wi-Fi network name or password
B) No Internet
C) Wi-Fi Network must be 2.4 GHz frequency
To Resolve:
Go back to step 3
Visit tsilink.com to sign up for an account and to
activate your device
See the complete manual for setup instructions when using a PC
Installation
-
-
Install bracket
-
Install on pole
Connect the power, then secure the cable and bracket using plastic ties
-
p/n 5002829 Rev B
Documents / Resources
|
BlueSky 8145 AIR QUALITY
MONITOR
[pdf] User Manual
8145 AIR QUALITY MONITOR, AIR QUALITY MONITOR, QUALITY MONITOR
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>