BURTON SAFES Version 2 – P1 Hotel Drawer Safe Owner’s Manual

: September 18, 2024
: BURTON SAFES

Table of Contents

Hotel Drawer Safe
ABOUT THE LOCK
Current supply / battery change
FIXING GUIDE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Version 2 – P1 Hotel Drawer Safe
Owner’s Manual

Hotel Drawer Safe

burtonsafes.co.uk
Instructions
HOTEL DRAWER
HOTEL POP UP

| £1,000 Cash Rating
---|---
| £10,000 Jewellery Rating
| Pin

ABOUT THE LOCK

This lock requires a 4-6 digit code to open. Guests/Users can choose their own code and a master code can be programmed.
The lock also features an emergency key.

It’s important to change the master code from the default

How to open the safe for the first time

Enter the code ‘000000’ (factory default master code)
Open the safe door

How to close the safe

Close the safe door
Enter your chosen code (must be 4-6 digits long)
Press the [LOCK] / [L] key

How to open the safe

Enter your 4-6 digit code
Open the safe door

How to change the code

Enter your code and open the safe door
Follow the instructions for ‘How to close the safe’

Incorrect entry
If an incorrect code is entered the bolts will not retract, try your code again. After 4 incorrect entries, the screen will display ‘ERROR’ and then ‘HOLD15’. The lock will be disabled for 15 minutes. You can’t enter a code again until the 15 minutes is up.
You can open the safe with the emergency key during the 15 minutes.

How to set/change the master code

It’s important to change the master code from the default
The master code can open the safe if the user code is forgotten.

Press key [0] twice followed by the [LOCK] / [L] key
The screen will display ‘OLD’
Enter your current master code (‘000000’ factory default)
Press the [LOCK] / [L] key, the screen will display ‘NEW’
Enter a new 6-digit master code followed by the [L] key
The screen will display ‘AGAIN’. Re-enter your new 6-digit master code
Press the [LOCK] / [L] key, the screen will display ‘DONE’

To open the safe with the master code:

Enter your 6-digit master code
Open the safe door

Current supply / battery change

To check the battery power press the [LOCK] / [L] key. ‘HI-BAT’ will display for a high battery and ‘LO-BAT’ will display for a low battery.
If the battery is low the screen will automatically display ‘BA-LO’. Replace the battery if you see this message. This lock takes AA batteries.
Burton Safes recommends the Duracell brand.

How to open the safe with the emergency key – Hotel Pop Up Safe

Remove the plastic cover labeled ‘Technosafe’
Insert the emergency key and turn it clockwise.
The screen will display ‘MANUAL’
Turn the key anti-clockwise and then remove it
Press the [LOCK] key and the bolts will retract
Open the safe door
Replace the plastic cover

How to open the safe with the emergency key – Hotel Drawer Safe

Insert the red key in the bottom of the keypad to release the plastic cover on the front
Remove the plastic cover and then the red key
Insert the emergency key and turn it clockwise.
The screen will display ‘MANUAL’
Turn the key anti-clockwise and then remove it
Press the [L] key and the bolts will retract
Open the safe door
Replace the plastic cover