BURTON SAFES FF Cabinet Lock Instructions

: September 21, 2024
: BURTON SAFES

FF Cabinet Lock

“`html

Product Information

Specifications

Model: FF Cabinet
Version: 1 – P1
Date: 14/8/2024
Lock Type: Digital
Code Length: 6-8 digits
Number of Codes: 2 (Master code and Secondary code)
Time Delay Range: 1-99 minutes
Open Window Range: 1-9 minutes

Product Usage Instructions

Opening the Safe

To open the safe, enter the correct 6-8 digit code using the
keypad.

Closing the Safe

To close the safe, simply close the door securely.

Changing the Master Code

To change the master code, follow the specific instructions
provided in the manual.

Activating the Secondary Code (Using the Master Code)

To activate the secondary code using the master code, follow the
steps outlined in the manual.

Deleting the Secondary Code

To delete the secondary code, refer to the manual for detailed
instructions.

Changing the Secondary Code

You can change the secondary code by following the steps
provided in the manual.

Turning the Keypad Sound On/Off

You can control the keypad sound by following the instructions
in the manual.

Programming the Time Delay and Open Window

Press the [ON] key
Press the [#] key
Enter the desired time delay and open window combination (e.g.,
for a 3-minute delay and 5-minute open window, enter 305)

Deleting the Time Delay and Open Window

To remove the time delay and open window settings, follow the
manual’s guidelines.

Opening the Safe with Time Delay and Open Window

To open the safe with time delay and open window features, enter
the code during the specified time frames.

Current Supply / Battery Change

If low power is indicated by a flashing red LED and acoustic
signals, follow these steps for battery replacement:

Locate the battery cover at the bottom of the lock
Remove the cover and take out the battery carefully
Unclip the wire and replace the battery ensuring no cables are
damaged
Note: You cannot change your code with low power, but you can
still open the lock

Frequently Asked Questions (FAQ)

Q: How many codes can be stored in this lock?

A: This lock can store two codes – a master code and a secondary
code.

Q: What is the range for time delay and open window

settings?

A: The time delay can be set between 1 to 99 minutes, while the
open window duration can range from 1 to 9 minutes.

“`

burtonsafes.co.uk
LOCKING INSTRUCTIONS
FF Cabinet
Version 1 – P1 – 14/8/2024

LOCKING INSTRUCTIONS
FF Cabinet
ABOUT THE LOCK
This lock requires a 6-8 digit code to open the lock. You can have 2 different codes on this lockthe master code and the secondary code. This lock can have a time delay and open window activated. The time delay can be 1-99 minutes long and the open window can be 1-9 minutes long.
How to open the safe
· Press the [ON] key · Enter a valid 6-8 digit code (the factory default is `123456′) · Press the [#] key · Press the button next to the keypad to release the lock · Open the drawer within 5 seconds
How to close the safe
· Close the drawer and press the button next to the keypad
Changing the master code
· Press the [#] key · Press key [1] followed by the [#] key · Enter the existing 6-8 digit master code · Press the [#] key · Enter a new 6-8 digit code followed by the [#] key · Re-enter the new 6-8 digit code, then press the [#] key to confirm
Activating the secondary code
(Using the master code)
· Press the [ON] key · Press the [#] key · Press key [2] followed by the [#] key · Enter the 6-8 digit master code followed by the [#] key · Enter a 6-8 digit code for the secondary code · Press the [#] key · Enter the 6-8 digit secondary code again followed by the [#] key to confirm
Version 1 – P2 – 14/8/2024

Deleting the secondary code
· Press the [ON] key · Press the [#] key · Press key [0] followed by the [#] key · Enter the 6-8 digit master code followed by the [#] key
Changing the secondary code
· Press the [ON] key · Press the [#] key · Press key [3] followed by the [#] key · Enter the 6-8 digit secondary code followed by the [#] key · Enter a new 6-8 digit code for the secondary code · Press the [#] key · Re-enter the new 6-8 digit code followed by the [#] key to confirm
Turning the keypad sound on/off
· Press the [ON] key · Press the [#] key · Press key [5] followed by the [#] key · Enter the 6-8 digit master code followed by the [#] key
Programming the time delay and open window
A time delay is the time you have to wait in between the entry of your code and the opening of your safe. An open window is the amount of time you have to open your safe. For example, if you wanted a 30 minute time delay and a 5 minute open window, this would mean that once you have entered a valid 6-8 digit code, you have to wait 30 minutes before you can open the safe door. After 30 minutes, you will have 5 minutes to open the safe door. If you wait longer than 5 minutes, you have to start the process again.
i. Press the [ON] key ii. Press the [#] key
· Enter the 6-8 digit master code followed by the [#] key · Now enter the desired time delay and open window length, i.e. for a 30 minute time
delay and 5 minute open window, enter 305.
Version 1 – P3 – 14/8/2024

Deleting the time delay and open window
· Press the [ON] key · Press the [#] key · Press key [6] followed by the [#] key · Enter the 6-8 digit master code followed by the [#] key · Enter [0][0][0]. The time delay is now deleted
Opening the safe with time delay and open window
· Press the [ON] key · Enter a valid 6-8 digit code · The time delay has started. A red LED flash and acoustic signal will
happen every 5 seconds · When the time delay is over the open window will begin. During the open window,
a green LED will flash with an acoustic signal every 5 seconds · During the open window, re-enter a valid 6-8 digit code and push the button to release the lock · Open the drawer within 5 seconds
Current supply / battery change
Low power is shown by the red LED flashing and a quintuple acoustic signal. The battery cover is located at the bottom of the lock. Remove the battery cover and carefully take out the battery. Unclip the wire and replace the battery. Take care when changing batteries to ensure that no cables are damaged. NOTE: You can not change your code while the lock has low power. However you can still open the lock
Version 1 – P4 – 14/8/2024