MINN KOTA 1810247 Alon Travel Cover 8 FT, 10/12FT & 15 FT Installation Guide
- June 7, 2024
- MINN KOTA
Table of Contents
TALON TRAVEL COVER
8 FT, 10/12FT & 15 FT
1810247, 1810248 & 1810249
THANK YOU
When you fish with us, you fish with an edge. With a passion. With experience.
You’re fishing with a Minn Kota. It was born in Mankato, Minnesota. It was
built by people who love this sport and want you to do more of it. It’s got
our reputation behind it and years of good fishing ahead of it. Thank you for
fishing with us.
Item /
Assembly| Part #| Description| Qty.
---|---|---|---
2| 2376487| COVER-TRAVEL, 8′ TALON BT| 1
2376488| COVER-TRAVEL, 10712. TALON BT| 1
2376489| COVER-TRAVEL, 15′ TALON BT| 1
INSTALLATION
ITEM(S) NEEDED
a. Take the Travel Cover (Item #2) and unzip and disconnect the zipper. Unsnap
all of the snaps. Take a look at the Talon from the back or stern of the boat
looking onboard. Notice the MotorHousing protruding further from the Talon on
the Starboard side of the boat.
b. Set the Talon Travel Cover on the top of the Talon with the Talon logo
facing Outboard so that the pocket for the Motor Housing fits the larger
housing on the Starboard side. The top mold of the Travel Cover should rest
firmly in place on the top of the Talon.
c. Pull the cover around the Inboard facing portion on the Talon and secure
the snaps alternately on each side of the Talon. Work from the Motor Housing
to the top of the Talon by pressing them together firmly. The Travel Cover
should have the Minn Kota logo facing Inboard.
d. Once all snaps are secure, make sure the Power Cord sits inside the track
along the side of the Talon on the Starboard side. Along the Port side, at the
bottom of the Talon just above the Mounting Bracket, attach each half of the
zipper together. Pull up until the zipper is secured just below the Motor
Housing.
RECOMMENDED ACCESSORIES
Talon Wireless Foot Switch
Gives you hands-free control of your Talons, including control of Anchoring
Modes.
Installation Brackets
Our extruded aluminum brackets are built with a reinforced construction so
they can hold Talon securely to your boat – no matter what. Our brackets are
designed to fit almost any transom orientation and outboard style and can be
adjusted and tweaked on two pivot points to the perfect orientation.
Talon Stomp Switch
These individually mountable, large target controls allow for automatic
up/down control of Talon from the bow of your boat.
Quick Disconnect Cable
This heavy-duty, waterproof connector features an all-inclusive screw-lock design.
Talon Mobile App
Control all the functions of your Talon plus software updates.
minnkotamotors.com
©2021 Johnson Outdoors Marine Electronics, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>