MINN KOTA 609443 i-Pilot Bluetooth Remote User Guide

MINN KOTA 609443 i-Pilot Bluetooth Remote

i-PILOT REMOTE

MENU CONTROL BUTTONS

• Home
  Pressing this button will always bring you to the Home Screen.

• Ok
  Press to accept menu selections. Press to power remote on. Press and hold for 3 seconds to power remote off.

• Left Softkey & Right Softkey
  Buttons change function based on the mode of operation and which screen is presently displayed. Softkey labels at the bottom of the display screen indicate current function.

• Menu Up & Menu Down
  Used to navigate softkey labels and menus.

MANUAL CONTROL BUTTONS

1. Speed Down & Speed Up
   Press to increase or decrease motor speed.

2. Prop On/Off
   Pressing this button will turn the Prop on and off.

3. Steer Left & Steer Right
   Press to steer the motor to the left or to the right.

4. High-Speed Bypass
   Bypasses the current motor speed to speed 10. Quickly double press to engage. Single press to disengage.

NAVIGATION BUTTONS

1. GO TO
   Opens the list of Spot-Locks and iTracks that are within navigable range.

2. Cruise Control
   Press to enable Cruise Control.

3. Spot-Lock
   Press to enable Spot-Lock.

4. AutoPilot
   Press to enable AutoPilot.

SPOT-LOCK

Engaging Spot-Lock

1.  Press the Spot-Lock button on the remote.
2.  The information for the temporary Spot-Lock location will show up on the display screen. Use the Menu Up and Menu Down buttons to find the Save softkey label at the bottom of the display screen. To save the Spot-Lock, press the Left Softkey to open the Save menu.
3.  The Save menu brings up a list of Spot-Locks. Use the Menu Up and Menu Down buttons to select one of the Spot-Lock memory locations. Press the Left Softkey to Save the Spot-Lock into the selected memory location.

Disengaging Spot-Lock

When Spot-Lock is engaged, press the Spot-Lock button to disengage Spot-Lock, or use the Menu Up and Menu Down buttons to find the Cancel softkey label at the bottom of the display screen. Use the Right Softkey to select Cancel.

Re-Engage a Saved Spot-Lock

1.  Manually navigate the boat to within a quarter-mile of a saved Spot-Lock location. Due to safety reasons, i-Pilot will not re-engage a saved Spot-Lock location greater than a quarter-mile away.
2.  Press the GOTO button on the remote.
3.  The Spot-Lock menu will appear on the display screen. Use the Menu Up and Menu Down buttons to scroll to a saved Spot-Lock location in the menu.
4.  Press the Ok button to select a saved Spot-Lock location.

Spot-Lock Jog

To engage Spot-Lock Jog, first engage Spot-Lock. Use the Speed Down  (jog backward), Speed Up  (jog forward),  Steer Left  (jog left), and Steer Right (jog right) buttons to jog the Spot-Lock location 5 feet in the selected direction from the current Spot-Lock location.

CRUISE CONTROL

Engaging Cruise Control

1.  Press the Cruise Control button on the remote.
2.  The Target Speed will appear on the display screen. Press the Speed Down or Speed Up buttons to adjust the Target Speed.

Disengaging Cruise Control

When Cruise Control is engaged, press the Cruise Control button on the remote to disengage Cruise Control.

HIGH-SPEED BYPASS

Engaging High-Speed Bypass

1.  Double press the High-Speed Bypass button.
2.  The Prop Speed will automatically go to speed 10.

Disengaging High-Speed Bypass

When High-Speed Bypass is engaged, press the High-Speed Bypass button on the remote to disengage High-Speed Bypass, or press the Speed Down button.

AUTOPILOT

Engaging AutoPilot or Advanced AutoPilot

1.  Press the AutoPilot button on the remote.
2.  The AutoPilot or Advanced AutoPilot icon will display on the screen.
3.  To adjust the desired heading, manually steer the motor to the new heading. i-Pilot will automatically lock onto the new heading.

Disengaging AutoPilot or Advanced AutoPilot

When either AutoPilot mode is engaged, press the AutoPilot button on the remote to disengage AutoPilot.

iTRACK

Recording an iTrack

1.  Use the Menu Up or Menu Down buttons to find the Record softkey label at the bottom of the display screen.
2.  Press the Left Softkey to select the Record menu.
3.  The Record menu brings up a listing of iTracks. Use the Menu Up and Menu Down buttons to scroll to one of the iTrack memory locations.
4.  Press the Ok button to select an iTrack memory location. Once a location is selected, the current location of the boat becomes the To Start location of the iTrack being recorded.
5.  Navigate the boat along the desired path or course. AutoPilot and/or Cruise Control can be used while recording an iTrack.
6.  To stop recording an iTrack, use the Menu Up or Menu Down buttons to find the Stop softkey label at the bottom of the display screen.
7.  Use the Left Softkey to select Stop.
8.  The recording will end automatically if the two-mile distance limit is reached for the iTrack or if the Spot-Lock or GO TO button is pressed.

Navigating an iTrack

1.  Manually navigate the boat to within a quarter mile of the saved iTrack. Due to safety reasons, i-Pilot will not re-engage a saved iTrack greater than a quarter-mile away.
2.  Press the GO TO button on the remote. The remote default is to first bring up saved Spot-Locks. Press the Right Softkey to bring up saved iTracks.
3.  Use the Menu Up or Menu Down buttons to select an iTrack to navigate.
4.  Using the Left Softkey or Right Softkey select the softkey label to either go To Start or To End. The boat will navigate to the closest point on the iTrack and then navigate To Start or To End depending on the selection made until it reaches that point.

Reverse an iTrack

The direction that the iTrack is being navigated can be reversed while the GO TO action is taking place. Use the Menu Up or Menu Down buttons to find the Reverse softkey label at the bottom of the display screen. Use the Left Softkey to select Reverse.

HEADER

• GPS Signal Strength
  Shows the level of GPS signal strength. If no bars appear, the system has not yet acquired a GPS fix.

• Motor Battery
  Displays motor battery level when prop is disengaged.

• Time
  Displays the current time.

• Remote Battery
  Displays the battery level of the remote.

• Talon
  Displays the connection with one or two Talons and indicates if the Talon(s) are deployed.

ICONOGRAPHY

• Spot-Lock
  Displays when Spot-Lock is engaged.

• Spot-Lock Jog
  Displays when Spot-Lock is engaged and the motor is communicating with a Heading Sensor.

• Legacy AutoPilot
  Displays when AutoPilot is engaged and the AutoPilot Mode is set to Legacy.

• Advanced AutoPilot
  Displays when AutoPilot is engaged and the AutoPilot Mode is set to Advanced.

• Record
  Displays when an iTrack is being recorded.

• iTrack
  Displays when an iTrack is being navigated.

• Prop Lockout
  Displays when the Prop is locked during certain functions.

• Trim
  Displays when Trim is being adjusted.

• Brightness
  Displays when screen brightness is being adjusted.

• Talon Selection
  Displays the active Talon as either left, right or both.

• Prop
  Displays when the Prop is enabled. Rotates when the Prop is on. Blinks when a mode of navigation is used that requires the prop to be enabled.

• Prop Speed
  Displays the current Prop Speed. Can be adjusted in 1/2 speed increments between 0 and 10.

• Ground Speed
  Displays the current speed over ground.

• Cruise Control
  Displays the Target Speed when Cruise Control is engaged.

• Lock
  Displays when the Remote is locked.

• Scroll Up & Down
  Displays when the softkey labels at the bottom of the display screen have more options available.

References

• minnkotamotors.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>