ANKER PowerWave Magnetic Car Charging Mount User Manual

Charge Fast, Live More

PowerWave Magnetic Car Charging Mount
USER MANUAL

Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.

• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
•  For the safest and fastest charge, use original or certified cables.
•  This product is suitable for moderate climates only.
• The maximum ambient temperature during use of this product must not exceed 40°C.
•  Open flame sources, such as candles, must not be placed on this product.
•  Only use a dry cloth or brush to clean this product.

Using Your Charging Mount

1. Install Your Charging Mount
   

2. Position the Charging Mount on a Center Panel with the Adhesive
   

3. Adjust the Charging Mount to the Optimal Viewing Angle
   

4. Charge Your iPhone
   

• This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.

• Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect
  the charging speed, or cause overheating.

• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.

•  High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2.  Increase the separation between the equipment and receiver.
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: PowerWave Magnetic Car Charging Mount
Model: A2931
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful
interference.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
   Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

This product complies with the radio interference requirements of the European Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2931 is in compliance with Directives 2014/53/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/

GB Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2931 is in compliance with Radio Equipment Regulations 2017. The
full text of the UK declaration of conformity is available at the following internet address:
https://www.anker.com/
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11
2AA, United Kingdom

This device was tested for typical body-worn operations.
To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other relevant provisions of the UKCA. All essential radio test suites have been carried out.

Specifications

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Customer Service

18-Month Limited Warranty*

Lifetime Technical Support

support@anker.com
support.mea@anker.com (For the Middle East and Africa Only)

(US) +1 (800)988 7973 Mon-Fri 6:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00

*EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in
this Limited Warranty.

@anker_official @anker_jp
@Anker Deutschland @Anker Japan @Anker
@AnkerOfficial  @Anker_JP

References

• Anker | Live Charged. - Anker Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>