GP Batteries WM2A USB Fast Charging Adapter Instruction Manual

GP Batteries WM2A USB Fast Charging Adapter

Product Information

The PD Charger WM2A is a compact and versatile charger that supports both USB-C and USB-A charging. It is capable of charging up to two devices simultaneously. The charger has a maximum power output of 20W, providing fast and efficient charging for your devices. The dimensions of the charger are 44mm in length, 42mm in width, and 31mm in height. It weighs only 50g, making it lightweight and portable.

Product Usage Instructions

1. Attach the appropriate power plug to the charger by sliding the plug onto the pins until you hear a click sound. Make sure to slide the top pin of the UK plug into its extended position before plugging the charger into a power outlet.
2. Plug the charger into a power outlet.
3. Connect your devices to the USB ports using a certified cable. The charger can charge up to two devices simultaneously.

Note: Please refer to the figures mentioned in the user manual for visual representation of the steps.

Read the instruction manual thoroughly before use. Keep the manual for future reference.

Using Your Product

1. Attach the appropriate power plug to the charger by sliding the plug onto the pins until you hear a “click” sound. (See figure a)
   • Ensure to slide the top pin of the UK plug into its extended position before plugging the charger into a power outlet. (See figure b)
2. Plug the charger into a power outlet.
3. Connect your devices to the USB ports with the certified cable. The charger can charge up to 2 devices at the same time. (See figure c)

Specifications

• Input: AC 100-240V, 50/60Hz, 0.5A Max.
• Output:
  • Single port charging
  • USB-C – DC 5V/3A, 9V/2.22A, 12V/1.5A, 20W Max.
  • USB-A – DC 5V/3A, 9V/2A, 12V/1.5A, 18W Max.
  • Simultaneous charging
  • USB-C+USB-A – DC 5V/3.1A, 15.5W Max.
• Total Output: 20W Max.
• *Dimensions:** 44(L) x 42(W) x 31(H)mm
• *Weight:** 50g

Safety Information

Please read below safety notes carefully before use to avoid any personal injury and property damage caused by improper use of the product. Any warranty claims or returns caused by misuses will not be accepted.

• Keep the product away from children and infirm persons.
• Keep the product away from heat sources, combustible gas, humidity and liquids.
• Do not operate a wet or otherwise damaged product.
• Operating temperature should be between 0°C to 30°C.
• Be careful not to crash the product while it is plugged in to avoid damage.
• Do not attempt to repair, disassemble or destroy the product in any way.
• Keep the product away from metallic or conductive objects to avoid short-circuit.
• Dispose the product as per local law and regulations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>