TC HELICON PERFORM-VG Ultra-Simple Mic-Stand-Mount Vocal and Acoustic Guitar Processor User Guide
- June 7, 2024
- TC-HELICON
Table of Contents
TC HELICON PERFORM-VG Ultra-Simple Mic-Stand-Mount Vocal and Acoustic Guitar Processor User Guide
You will need
(3)
Mute mixer when connecting
(5) “SET” FLASHES WHEN COMPLETE
(8) Tone adds dynamic EQ, compression, de-easing, and gating to your
voice.
Press and hold the TONE button, then adjust the amount of pitch correction
with the control knob.
(9) Anti-Feedback helps to eliminate squealing from your speakers using
EQ and auto level control. 
(10) Engage the Body Rez effect to greatly improve the sound of your guitar’s pickup.
(11) Press the
MIX button to adjust the balance of vocal and guitar signals sent to the MIC
OUT jack. Press and hold the MIX button to enter talkback mode to bypass FX
and access the guitar tuner.
Note: Connecting a cable to the THRU jack removes the guitar signal from
the MIC OUT jack.
(12) Tap in time with your music to set the tempo for Echo.
(13) If you have a condenser mic, you’ll need to turn on +48V (press + hold) for it to work.
(14) Hold an effect button to enter edit mode. Turn the control knob. The effect volume increases as the LED segments light up.
(14) After the effect level reaches its maximum, the LED ring resets and
changes the style (sound) of the effect. The LED color also changes for each
style.
(15)
AUX level is set by the sending device.
(16) You can use the optional Switch 3/6 to change presets if your hands
are busy.
(17) Place the mic behind your main speakers to prevent feedback.
(18) Visit musictribe.com to download the full manual.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, Clark Teknik, Lab Gruppe, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim,
Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online
at musictribe.com/warranty.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
TC Helicon
PERFORM-VG
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street, Las Vegas NV 89118, United States
Phone Number: +1 702 800 8290
PERFORM-VG
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Operation Ambient Temperature up to 45°C.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment
2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and
Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark