TC HELICON TALKBOX SYNTH Guitar and Effects Pedal User Guide
- June 6, 2024
- TC-HELICON
Table of Contents
TC HELICON TALKBOX SYNTH Guitar and Effects Pedal
TALKBOX
SYNTH
Controls
- Style – Selects from the range of Talkbox and Synth sounds.
- Guitar thru
- Correction – Adjusts the amount of pitch correction.
- Reverb – Selects the type and amount of reverb effect.
- Guitar input
- Tone – Engages ‘Adaptive Tone’ for EQ, compression, de-essing and gating. Hold the Tone knob while turning the Correction knob to adjust the level of the current Talkbox or Synth effect.
- Footswitch – Bypass the Talkbox/Synth effect with a single press. Hold the Tone button while powering on to allow the footswitch to operate in momentary mode.
- USB – Accepts micro-USB cables for firmware updates.
- On/Off
- Out – Connect to a mixer or powered speaker.
- Mic – Connect your microphone.
- Power – Connect a 9 V / >300 mA power supply, such as the PowerPlug 9 (not included). The pedal also accepts 4 x AA batteries.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
TC Helicon
TALKBOX SYNTH
Responsible Party Name:
Music Tribe Commercial NV Inc.
122 E. 42n d St.1,
8th Floor NY, NY 10168, United States
Email Address:
TALKBOX SYNTH
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Operation Ambient Temperature up to 45°C.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive
2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>