TSL-AC-AP3006 Tesla Smart Air Purifier Pro User Manual
- June 7, 2024
- Tesla
Table of Contents
TSL-AC-AP3006 Tesla Smart Air Purifier Pro
TSL-AC-AP3006/TSL-AC-AP2006/TSL-AC-AP6006
EN DE
CZ
SK
TESLA SMART AIR
PL
PURIFIER PRO
HU
USER MANUAL
SL
HR
1
CONTENTS
1. SECURITY NOTE
3
2. PRODUCT INTRODUCTION
5
CONTROL PANEL
6
OTHER ITEMS IN THE PACKAGE
6
3. BEFORE USE
7
RECORD THE BEGINNING USE DATE IN THE LABEL
7
LEARNING AIR QUALITY INDICATOR
7
METHOD OF DISMOUNTING AND INSTALLATION
7
PLACEMENT SITES OF AIR PURIFIER
7
INSTALL FILTERS
8
FILTERS AND FUNCTIONS
9
4. HOW TO USE
11
THE CONTROL PANEL
11
STARTING AIR PURIFIER
11
AUTO MODE
12
SLEEP MODE
12
WIND SPEED ADJUSTMENT
12
TIMING FUNCTION
12
WIFI FUNCTION
12
UV FUNCTION (NEGATIVE ION FUNCTION)
12
RESET
13
AIR QUALITY INDICATOR
13
5. CLEANING AND MAINTENANCE CLEAN PRE-FILTER
13
CLEAN PRE-FILTER
14
CLEAN AIR PURIFIERS
14
REPLACE FILTERS
15
CLEAN AIR QUALITY SENSORS
5
TIME FOR REPLACEMENT OF FILTERS
6
6 FAULT HANDLING
7
WARRANTY AND SERVICE
17
TO ORDER PARTS OR ACCESSORIES ACCESSORIES
17
7. ADDITIONAL INFORMATION
18
8. WIFI USE GUIDE
19
PLEASE READ THIS MANUAL CAREFULLY, AND FOLLOW THIS MANUAL STRICTLY. PLEASE KEEP IT PROPERLY AFTER READING FOR FUTURE REFERENCE.
2
1. SECURITY NOTE
In order to avoid possible damage to you or others or financial damages,
please be sure to pay attention to the following safety precautions.
If the machine`s power supply cord is damaged, you must entrust the
manufacturers of the machine, maintenance service center or qualified
technicians will change for you, in case of any danger.
WARNING
Don’t touch the power plug with wet hands. No wet hands! Otherwise it may
cause electric shock.
It is prohibited to use beyond power or connected devices specified value.
Only 220V ac power allowed. Banned! Using universal socket or exceed the
specified value of the equipment may cause overheating and fire accident.
Before cleaning appliances, please make sure have power off. Pull the plug!
Otherwise air purifier may run suddenly, cause accident getting an electric
shock.
Before start the air purifier, please insert the plug completely into the
socket. Failure to fully inserted into the socket m ay cause electric shock
and overheating or fire accident.
No damage on the power line and socket. Banned! In the use of the machine, don`t bind, wires. Use the broken wire may cause electric shock, short circuit or fire accident. Ban cut, modification, excessive distortion, torsion, pull wire, or put weight on wires or plugs.
Please clean power plug regularly. Accumulation of dust on the power plug and the moisture can damage the insulation of the plug part, resulting in fire accident. Pull out the power plug, then wipe with dry cloth (ban using wet cloth!). Remember to pull the power plug if not use for a long time.
Prohibit unauthorized apart or modified the air purifier. Banned take apart Otherwise it may cause electric shock, failure or fire accident.
Ban rod or other metals placed in the outlet or inlets. Banned! Otherwise it may affect the internal parts and cause electric shock or damage.
3
ATTENTION
Any situation as below, please turn off the power of the machine.
·
A switch does not work.
·
A circuit breaker or fuse burned.
·
The power cord or plug abnormal fever.
·
Finding the burning odor or abnormal sound or vibration.
·
Any other anomalies or failure.
WARNING
Prohibited use solvent such as benzene or thinner to clean air purifier, avoid
touching with insecticide spraying. Banned! Otherwise air purifier can rupture
and cause damage, even short circuit, so that cause electric shock or fire
accident.
Ban in place for being fat particles using this air purifier. Banned! Such as
inside the kitchen, can reduce the service life of air purifier filter. The
air purifier should not be used for ventilation or extraction equipment.
Banned use the air purifier in indoor with fumigation type pesticides. Banned!
Chemical residue could be accumulated inside the machine, and then release
from the outlet to harm health. After using pesticides, please let thoroughly
ventilated room, before using the air purifier.
Wet body is prohibited. No wet! Otherwise it may cause short circuit, wire and
cause fire or electric shock accident or injury.
Pull out the power plug, should hold the plug, instead of pulling wires.
Otherwise it may cause short circuit, wire and cause fire or electric shock
accident or injury.
Banned in high temperature, damp or wet body sites using this air purifier,
such as the bathroom. No wet! Air purifier may leakage caused electric shock
or fire accident.
Do not put the volatile substances or combustible materials, such as tobacco
or mars to float into the machine. Away from the fire! Away from the fire!
Otherwise it may cause fire accident.
This appliance can be used by children aged from 8 years and above and persons
with reducedphysical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
4
2. PRODUCT INTRODUCTION
Air outlet Air quality indicator
Air inlet
Handle
Air Quality Sensor Back cover
Power cord hole
Photoresistance
Efficiency HEPA filter
Activated UV lamp carbon
filter
Pre-filter
Air inlet panel
5
CONTROL PANEL
Timing button
UV button
Power button
Wind speed adjustment Model button
Restoration button
OTHER ITEMS IN PACKING
operation manual
AIR QUALITY INDICATOR
Blue ( PM2.5 = 0 ~ 50 ) Perfect Green ( PM2.5 = 50~ 100 ) Good Purple ( PM2.5
= 100-150 ) Normal Red ( PM2.5 = 150~ ) Bad
Notice: Please press the restoration button, if you want to turn off the air
quality indicator light. (PM2.5 digital display just for reference)
6
3. BEFORE USE
RECORD THE BEGINNING USE DATE IN THE LABEL
In order to replace the filter on time, before using air purifier, please keep
the date recorded in the back of the nameplate, thus to achieve the best
performance.
Air quality color indicator
Name plate and notes
TIPS
After removing the plastic package of each filter, the efficient HEPA filter and activated carbon filter must be replaced once a year. Photocatalyst filter should be replaced every three years, after a period of time, should exposure under UV for more then 2 hours.
To know the air quality indicator Air quality indicator can reflect the air quality conditions, please refer to the specific page 6 and page 14.
Method of dismounting and installing the air
inlet panel 1. Method of removing the air inlet Panel. Hold on to the groove
at both sides of the air inlet panel, then gently pull it up. 2. Method of
installing the air inlet panel. Reinstall the air inlet panel, alignment and
insert it into the fixed groove, and then gently push it up.
1
2
Placement sites of air purifier In order to make your room air to achieve good effect on both sides of the cycle, to ensure the gap between the air inlet and the wall at least 50 cm, the air outlet at least 10 cm. Please keep 1 meter away from television, radio, etc. Please do not put the power plug together with the television, radio and other electrical power plug inserted into the same socket, (otherwise it may cause screen jitter and noise generated.) · The long-term placement in the same sites may dirty the host walls. · To ensure the machines have adequate ventilation and maximum efficiency, don`t interfere with the air outlet and air inlet.
10cm
50cm
50cm
7
INSTALL FILTER
Information Please remove all the package of all the filters in the machine
before using the air purifier, according to the below instruction.
ATTENTION
· Please make sure the power plugs have been put off before installation,
maintenance and transportation. · Please do not operate the air purifier
without the filters. · Please remove the package of each filter before using.
TIPS
You can put the purifier on the wall to enhance the stability when removing or
installing the filters.
STEPS
Initial use this air purifier, please install the filters correctly as below
instructions.
1. Please remove the all packages and put the purifier on the dry, stable,horizontal ground.
2. Hold on the grooves at both sides of the air inlet panel, then gently pull it up.
3. Take out all filters from this purifier.
1
2
4. Remove all packages.
8
5. Install all the filters in order.
6. Install the pre-filter as the instruction.
7. Install the air inlet panel again. Align and insert it to the fixed grooves, then gently push it.
TIPS
Please be carefully when install the air inlet panel.
FILTERS AND FUNCTION
Pre-filter Efficient HEPA filter Activated carbon filter + Photocatalyst
filter 4 points purification system, could effectively purify the air, make
life more healthy. One: Pre-filter Two: Efficient HEPA filter Three: Activated
carbon filter Four: UV lamp
ONE: PRE-FILTER Use micron mesh filter, effectively block 2.5mm fibrous
particulate matter, Blocking rate > 99.9%. It can be cleaned easily by tens of
thousands times. Preventing larger particles such as pet fur, dander and
coarse dust, etc. Can increase the life of the following filters.
TWO: EFFICIENT HEPA FILTER The rate of removing the minor particles small to
0.3 micron from the airflow can up to 99.9%. Spread of allergens and bacteria
in air flow, such as pollen, smog and viruses.
THREE: ACTIVATED CARBON FILTER Removing volatile organic compounds, such as
secondhand smoke and kinds of polluting gases.
FOUR: UV LAMP Effectively kill a variety of common bacteria and viruses,
inhibit the production of bacteria and viruses.
9
TIPS
Cold cathode UV lamp trigger voltage is only 500V,will not produce ozone, can
use it safely.
THE ALLERGEN
Coarse dus Hair Harmful Particles
Dander
Dust
Pollen
Pet fur
Smoke
Dust mites
Odor Chemical substances
10
4. HOW TO USE
CONTROL PANEL
PLUG IN THE POWER
Plug in the power. The music starts and all the lights flash 3 times
continuously, then all the lights off, leaving only the power indicator light
in red, enter the standby mode.
STARTING AIR PURIFIER
Press the power button to enter into auto mode with the lights on. When the
machine start, the air quality indicator light will be slow flashing on, it
begins to detect the air quality after preheating for 5s. When auto mode
start, it will detect the air quality automatically.
AIR QUALITY INDICATOR
Green ( PM2.5 = 0 ~ 50) Excellent Blue ( PM2.5 = 50~100) Good Purple ( PM2.5 =
100-150) Bad Red ( PM2.5 = 150~ ) Very Bad
Notice: Please press the restorationbutton, if you need to turn off the air
quality sensor light.
11
AUTO MODE
Turning the power on it will detect the air quality automatically. Choosing
the auto mode,will give you the most appropriate fan speed.
SLEEP MODE
Sleep mode, have built-in radial sensor, which will sense the strength of the
light ,if the light intensity is under the condition of insufficient, all
lights of the machine will be dimmed, and at the same time, the machine
automatically change to silent mode of operation, do not disturb your rest at
night.
WIND SPEED ADJUSTMENT
Wind speed can be selected in one,two,three grade.
TIMING FUNCTION
Tap this key to switch the timing between 1h, 4h and 8h.
WIFI FUNCTION
Press and hold for 5 seconds to turn on the Wifi function on within in 5
seconds after turn on the machine.
UV FUNCTION (NEGATIVE ION FUNCTION)
Press the UV button to open the UV lamp. Press and hold for 5 seconds to turn
the ionizer function on or off.(the ionizer function automatically open when
the machine power is on)
12
RESET
Reset the machine by pressing the button for at least five seconds, (This
function is only available after the replaacement remind of filter.).
AIR QUALITY INDICATOR
Filp this button to open/close air quality color indicator.
5. CLEANING AND MAINTENANCE
Be sure to pull out plug before cleaning. Do not put the product into water or
any other liquid. Do not use corrosive or flammable gas (e.g. bleach or
alcohol) to clean any part of the product. Only pre- filter can be cleaned
with water, other filters can`t.
CLEAN AIR PURIFIER
Clean the medial and lateral regularly to prevent dust accumulation. 1.use
soft dry cloth to wipe the dust. 2.use soft dry cloth to clean inlet and
outlet.
CLEAN AIR QUALITY SENSOR
Clean the air quality sensor every two months to make sure purifier run at the
best performance. If the purifier used in dusty environment, please clean it
more often.
ATTENTION
When the indoor humidity is very high, the air quality indicator may be
forming condensate. So even if the air quality is good, air quality indicator
may also indicate poor air quality, in this case, you have to clean the air
quality indicator or use any manual speed setting.
1
2
3
1. Using a soft brush to clean the inlet/outlet of air quality sensor. 2. Remove the protective cover of air quality sensor. 3. Clean the air quality sensor, inlet and outlet with wet cotton swabs slightly. 4. Dry it with dry cotton swabs. 5. Remount the protective cover of air quality sensor.
13
CLEAN THE PRE-FILTER INFORMATION
In order to achieve the best performance, clean and maintain the Pre-filter
every two months (about 480 hours) from the beginning to use. Based on the
average 8 hours a day, 7 days a week frequency, keep the machine working under
the household environment. External maintenance : use wet cloth(or the mild
detergent)to wipe the surface to prevent the accumulation of dust. Turn off
the air purifier and pull out the plug before cleaning and maintenance. Only
the pre-filter can be cleaned, other filters can`t.
ATTENTION
Please use the low power vacuum cleaner, preventing the filter from damage.
TIPS
Before putting each filter into the machine pls remove the plastic packaging,
and ensure that the labels on the filters are outwards.
OPERATION STEPS
1. Turn off the power to stop the air purifier.
2. Pull out the power plug.
5. Use a soft brush or a vacuum cleaner to remove particles, please use water or soap water to clean the filter, then place it into the machine when it is completely dry.
3. Hold on groove at both side of the front panel and pull it outward. Then remove it upwards.
6. Put back the pre-filter into the air purifier.
4. Removed the protruding part of the gauze filter before cleaning it.
7. Re-install the front plate, align and insert into the fixed groove, then gently pushed it up.
14
8. Plug in.
9. Turn on the power and start the air purifier.
REPLACE FILTERS
A reminding of filter replacement comes when machine in normal working for
more than 1600 hours, and the power lights flash slowly (the red lights
flashing when standby, the blue lights flashing when it is working). After the
indicator light of replacement of filter shows, the machine can still work.
ATTENTION
Please turn off the power and pull out the power plug before replacing the filter.
TIPS
Remove all the plastic packaging of each filter before put into machine, To
ensure the filter label is outward.
OPERATION STEPS
1. Reminding to replace the filter. Flashing
4. Take off all filters inside.
2. Turn off the power, then pull out the power plug.
5. Remove all the plastic package of the filters, put back into the purifier.
3. Hold on the grooves of both side of the front panel, then gently pull it up.
6. Put back the pre-filter into the purifier.
15
7. Re-install the front panel, keep alignment and inserted into the fixed groove, then gently push it up.
8. After replacing the filter, plug in power, hold on the reset button for 5 seconds, then machine resets.
UNUSED FOR A LONG TIME
Pull out the power plug. (because the power consumption happened when it is
standby.) Thoroughly dry the inside. (otherwise it may lead to the equipment
trouble.) Store the machine in a dry ventilated place. (lay flat or place
upsight down may lead to the product trouble.)
REPLACE FILTER REFERENCE TIME
When the total machine work time reach to 1600hours, the machine will notice
to change the filter. The power indicator will flash ceaselessly(one time per
second). The red light showed when it is standby, the blue light showed when
it works. But the machine still can work when get the notice of changing the
filter.
TIPS
1. Consider you and your family`s health, please change the filter screen in
time. 2. After sealing off filter, if the usage time is shorten. But suggest
to change
one-time per six months. 3. After sealing off filters, the filter should be
changed one time per 12 months.
ATTENTION
Please turn off or Pull out the plug, before you change the filter.
16
6. FAULT HANDLING
This chapter list the possible problems when using this product. If you can`t solve the problems based on the below information, please contact with our customer center or dealers.
Condition Machine cant turn on The fan doesnt work
Performance is poor or not best purification ability
Possible reasons
Possible solution
The front panel may not be installed.
To remove the front panel, then install the panel again.
Power plug is not inserted into the power source.
Pull out the power plug, then insert into the power source.
The power plug or wire is damaged.
Contact with our customer center or dealers.
The machine is not turned on. Insert the power source, and turn on the machine again.
The dynamo is damaged.
Contact with our customer center or dealers.
The machine is put on the uneven place.
Remove the machine to the flat place.
Loose or foreign particles inside the machine.
Contact with our customer center or dealers.
The motor is loose.
Contact with our customer center or dealers.
Plastic packaging of each filter is not removed.
Before using, please remove plastic packaging of each filter. Please clean the cleaning mesh filter.
Washable mesh filter is dirty. Replace one set of new filters.
Filter is not replaced.
Replace one set of new filters.
Machine inlet or outlet was blocked.
Contact with our customer center or dealers.
Plastic packaging of each filter is not removed.
Before using, please remove plastic packaging of each filter.
The gap round the machine is To ensure the machine at least
not proper.
50 cm clearance on both
sides of the air inlet and the
outlet at the back of the ma-
chine at least 10 cm.
Machine filter missing or sequence error.
To ensure that all the filters put the correct sequence in machine.
Exceed the expect cover area.
To ensure the machine work in the suitable area.
17
WARRANTY AND SERVIS
If you need to understand information or have any questions you can also
contact our customer service center or dealer.
Pre-filter Efficient HEPA filter Activated carbon filter
7. ADDITIONAL NFORMATION
PARAMETERS
Model: AP2006 Rated Voltage: 220V Rated Frequency: 50Hz Rated Power: 20W CADR:
210 m3/h Noise: 20-58dB(A) Weight: 5kg Model: AP3006 Rated Voltage: 220V Rated
Frequency: 50Hz Rated Power: 30W CADR: 360 m3/h Noise: 20-60dB(A) Weight: 7kg
Model: AP6006 Rated Voltage: 220V Rated Frequency: 50Hz Rated Power: 60W CADR:
510 m3/h Noise: 20-65dB(A) Weight: 10kg
18
8. WIFI USE GUIDE
1. Scan the QR code specified above, download and install the Tesla Smart
APP. 2. Open the Tesla Smart APP and choose to create a new account or log in
di-
rectly. 3. Click the”+” sign in the upper right corner to add the device. 4.
Select ,,small home appliance- air purifier”; Turn on the air purifier, and
press
,,MODE”to enter the distribution network mode within five seconds, see the
WIFI indicator on. 5. Enter the WIFI password and click ok. 6. Click ,,Fast
flashing”; Note: please ensure that the mobile phone and air purifier are in
the same WIFI environment; 7. Wait for device connection to complete. 8. “Add
device success” appears to indicate that the device connection was successful.
9. Click finish to enter the control interface to control the machine.
1
2
3
4
5
6
7
8
9
19
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product
must be disposed of in accordance with the regulations for disposal of
electrical and electronic equipment (Directive 2012/19/EU on waste electrical
and electronic equipment). Disposal together with regular municipal waste is
prohibited. Dispose of all electrical and electronic products in accordance
with all local and European regulations at the designated collection points
which hold the appropriate authorisation and certification in line with the
local and legislative regulations. Correct disposal and recycling help to
minimise impacts on the environment and human health. Further information
regarding disposal can be obtained from the vendor, authorised service centre
or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty Trade s.r.o. declares that the radio equipment type AP2006,
AP3006, AP6006 is in compliance with EU directives. The full text of the EU
declaration of conformity is available at the following internet address:
teslasmart.com/declaration Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.400 – 2.4835 GHz Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer Tesla Global Limited 108 Lok Shan Road, Tokwawan,
Kowloon Hong Kong, 85200 www.teslasmart.com
20
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>