RITTAL TE7000 19 Inch Network Rack Instructions
- June 3, 2024
- RITTAL
Table of Contents
TE7000 19 Inch Network Rack
**Instructions
State: 24/09/2022 (Source: rittal.com/au-en)**
TE7000 19 Inch Network Rack
TE 7000.580 – Network racks TE 7000
TE 7000 IT enclosure, prepared for the individual interior installation.
Features
| Model No. | TE 7000.580 |
|---|---|
| Benefits | No frame structure |
Optimum accessibility
Readily dismantled and therefore easily installed
Material| Sheet steel
Glazed door: Single-pane safety glass, 4 mm
Surface finish| Mounting frame: Dipcoat-primed
Enclosure panels: Powder-coated
Colour| RAL 7035
Supply includes| Self-supporting 482.6 mm (19″) mounting frames, front and
rear, depth-variable
Glazed door at the front, incl. 130° hinge, recessed handle and security lock
3524 E
Sheet steel door at the rear, including 130° hinge, security lock 3524 E
Side panels, lockable, including security lock 3524 E
Base frame with maximum cut-out (for optional population with module plates)
Roof plate including brush strip for cable entry and concealed cutout for
optional fan.
4 levelling feet, M12, including base/plinth adaptor (supplied loose) Spacers,
20 mm (supplied loose) to raise
the roof
Dimensions| Width: 800 mm
Height: 2,200 mm
Depth: 600 mm
Units| 47 U
Distance between levels as
delivered| 495 mm
Basic material| Sheet steel
Packs of| 1 pc(s).
Weight/pack| 120.2 kg
Copper weight (kg per piece)| 0
EAN| 4.02818E+12
ETIM 7.0| EC002499
ECLASS 8.0| 27180207
Tender text
Network enclosure TE 7000
Screw-fastened, dismantling enclosure construction based on a self-supporting
482.6 mm (19.) mounting profile which also acts as the enclosure frame.
Modular roof and bottom frame connected to a supporting rack via imperial
mounting frames. Plug-type, lockable side panels including security lock
3524E.
Glazed door at the front, with 4 mm safety glass, sheet steel door at the
rear. Both including two-point locking rod, handle tray, safety lock 3524E,
may be replaced by an Ergofrom-S handle for optionally integrating a semi-
cylinder. Door hinges may be swapped, door opening angle 130°. Roof plate with
integral brush strip, fan unit ready for connection including thermostat
control may be retrofitted optionally.
Interior installation is via two depth-adjustable 482.6 mm (19.) mounting
frames with integral 25 mm system holes. The distance between the 482.6 (19.)
angles is freely selectable.
Maximum load capacity of one mounting level is 200 kg, i.e. max. 400 kg for
each rack.
The enclosure is bayable. A base/plinth may be mounted optionally.
Supply includes: enclosure including levelling feet and spacers for raising
the roof.
Material: sheet steel
Surface finish: powder-coated in RAL 7035
Dimensions: WxHxD: 800x2200x600 mm
Available mounting height: 47 U
Protection category: IP 20
© Rittal 2022
Documents / Resources
|
RITTAL TE7000 19 Inch Network
Rack
[pdf] Instructions
TE7000 19 Inch Network Rack, TE7000, 19 Inch Network Rack, Network Rack, Rack
---|---