Rittal 7888.616 Roof Plate Removable Instructions

Rittal 7888.616 Roof Plate Removable

The TX CableNet – places extra space at your disposal by avoiding the problem of unnecessarily wide or deep IT racks. This IT network rack is thus also suitable for use in smaller IT environments and is already optimally prepared for individual interior installation.

Features

• Model No. TX 7888.616

• Design

  • New version with side panels

• Benefits New roof plate concept: When cabling, the depth is utilised in full, plus optional integration of a fan module Efficient frame concept for individual configuration Side panels, screw-fastened for rapid access 482.6 mm (19″) mounting angles, depth-variable Comprehensive range of accessories for bespoke interior configuration

  • Material Roof: Sheet steel, 1.5 mm
    Enclosure frame : Sheet steel, 1.5 mm
    Mounting angles : sheet steel, 2 mm

• Surface finish

  • Enclosure frame : Dipcoat-primed
  • Enclosure panels : Dipcoat-primed, powder-coated

• Color RAL 7035

• Supply includes Enclosure with glazed front door and rear door Side panels, screw-fastened 482.6 mm (19″) mounting angles Roof plate, screw-fastened, with concealed cable entry at the rear, prepared for fan mounting.

• Dimensions

  • Width: 600 mm
  • Height: 1,200 mm
  • Depth: 600 mm

• Units 24 U

• Distance between levels as delivered 345 mm

• Design doors Glazed door, one-piece With 3 mm single-pane safety glass

• Construction rear door Sheet steel door, one-piece

• Construction front door Glazed door, one-piece

• Load capacity (static ) 500 kg

• Protection category to IEC 60 529 IP 20

• Basic material Sheet steel Packs of 1 pc(s).

• Customs tariff number 94032080

• EAN 4028177994638

• ETIM 8 EC002499

• ETIM 7.0 EC002499

• ECLASS 8.0 27180207

Approvals

• Explanations
  • Declaration of conformity
  • Declaration of Conformity UK

Tender text

IT rack, installation height 24 U, glazed door at the front, One-piece closed sheet steel door at the rear. Article number 7888.616

Frame structure
IT rack, consisting of a torsion-resistant, welded, symmetrical frame made of rolled and 16-folded vertical profiles, connected to a horizontal frame below and horizontal cross profiles, with a screwed roof plate at the top. All frame profiles, with integrated system perforation in a 25 mm hole grid, enable convenient interior design by simply hanging and securing the installation components. All profile edges are rounded. The vertical frame profiles each have two in-depth and width staggered mounting levels, which can be individually adjusted for flexible fastening of the components. The baying of the cabinets is possible at the front, back, and side. Load capacity: up to 500 kg.

Floor
Open floor frame, without floor panels, optionally for individual equipping with floor modules from the accessories range.

Front and back door
Transparent door at the front, with 3 mm toughened safety glass. Steel sheet door at the rear, one-piece, closed. Front and rear doors are each double hinged, with designer handle and 2-point bar lock, Safety lock 3524 E, replaceable with AX comfort handle Optional integration of a semi-cylinder. Swapping door hinge side possible, door opening angle 135° when installed individually, 105° in array. Door hinges with captive hinge pins.

Roof sheet
Sheet steel roof, one-piece, closed, screwed, prepared for cable routing on the rear, prepared in the middle for fan installation. The roof plate can be rotated for cable routing at the front. To support passive ventilation the roof sheet can optionally be raised using spacers.

Mounting levels
Cabinet pre-assembled with two 482.6 mm (19″) mounting levels, front and rear. The total static load capacity of both assembly levels is 500 kg. Mounting levels consisting of universal profile rails, front, and rear, variable in width and depth, in 15 mm dimensions, on depth struts at the top and bottom in the cabinet frame, screwed. The 19″ mounting levels can be positioned both symmetrical and asymmetrical with lateral offset, positioned in the housing. Profile rails at the front and back included an additional hole pattern according to standard EIA 310 E. All height units are marked on the profile rails and numbered bidirectionally. Unit marking on both mounting levels for simplified assembly of the installation components can be read from the front outside and the back inside. Profile rails at the front prepared for tool-free mounting of cable management aids for organizing structured cabling within the highest packing density. Profile rails at the rear are prepared to accommodate a Power Distribution Unit (PDU) on both sides with the 1U form factor, without consumption of installation volume due to the special space-saving lateral installation between the mounting level and the side wall within Zero U Space.

• Side walls : One-piece screwed side walls mounted on the cabinet.
• Material : Cabinet frame, roof: sheet steel 1.5 mm
• Roof cutouts : 1.2mm
• Rear door : sheet steel 1.2 mm
• Front door : sheet steel 1.2 mm, safety glass 3.0 mm
• 19″ profile rails : sheet steel 2.0 mm

Surface
Flat parts, doors dip-primed, powder-coated in RAL 7035 Interior installation dip primed in RAL 9005 Cabinet frame dip primed in RAL 7035

Approvals
CE declaration of conformity RoHS 3

• Dimensions (WHD): 600x1200x600 mm
• Item number : 7888.616
• Manufacturer : Rittal GmbH & Co. KG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>