igloohome IGP1 Smart Door Padlock User Guide

User guide
Padlock.
Version 0.2 05/19

Welcome!
This guide will get you up and running with your igloohome Smart Padlock. In the meantime, you should follow igloohome on Facebook and Youtube!

Like us on Facebook

https://www.facebook.com/igloohomeco/

Visit our Youtube

https://www.youtube.com/channel/UCHR5V4tDKZgEykPaz5SQvtQ

As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloo home.co/support for the latest version of the manual.

What’s Included

Specifications

Model
Battery Type
Battery Life
Emergency Power
Operation Temp
Storage Temp
IP Rating Body Material
Shackle Material
Weight
Unlock Mechanism| igloohome Smart Padlock
CR2 Lithium Battery
Up to 1 Year
9V Alkaline Battery
-20°C to 50°C
-30°C to 60°C
IP66
Zinc Alloy
Hardened Steel
Net: 450g, Gross: 550g
Bluetooth, PIN code
---|---

NOTE: This product functions best with Panasonic CR2 Lithium batteries. Do not use rechargeable, heavy-duty or other battery types. Please note that using recommended battery brands such as Panasonic, Duracell, or Energizer will improve the performance and lifespan of the lock.
For damage resulting from the incorrect use of a lock, use of lock-in potentially explosive environments, or use of lock outside of stipulated specifications, the customer bears sole responsibility. igloohome accepts no liability whatsoever.

Lock Anatomy

Features

PIN / Bluetooth Unlock

| Master PIN Code
The igloohome Smart Padlock unlocks with a permanent Master PIN Code.
---|---
| Bluetooth Master Key
The igloohome Smart Padlock unlocks with Bluetooth via the app.
| User PIN Code
The igloohome mobile app can generate multiple types of User Pin codes, e.g. One-Time, Permanent & Duration.
| Bluetooth Guest Key
The igloohome mobile app can generate and share Bluetooth keys (based on duration with guests to unlock the Smart Padlock.

Battery

| Battery Life
The Padlock can last up to 1 year with a CR2 lithium battery.
---|---
| Low Battery Indicator
The Status Indicator shows a red light when the battery level is 20% and below, followed by a sound alert when the keypad is woken up. The battery level can also be monitored on the app and is updated during Bluetooth Unlock.
| Emergency Jump Start
If battery power is drained, an external 9 Volt battery can be used to provide emergency power. The terminals of the 9V battery must be in contact with the JumpStart contact points of the Padlock as shown in page 15.

Features

Others

| Keypad Security Lockout
The lock will disallow any PIN entries and sound an alarm when there is a number of incorrect PIN attempts.
Users can configure the number of incorrect attempts to trigger
timeout.
---|---
| Auto Relock
The Padlock relocks automatically when the shackle is closed. User can
deactivate auto-relock function if they prefer manual relock.
| Masking Security Code
A total of 16 digits including the masking digits can be entered to
prevent the PIN code from being exposed.
| Protective Rubber Bumper
Prevent bumping on hard surfaces with the rubber bumper as a
padding on the back.
| Weather Resistant
The padlock is able to withstand weather conditions with protection against dust and water (IP66).

Changing the shackle

1. Unlock the Padlock and pull the shackle to open position. Turn Torx cap clockwise 90° with the Torx Screwdriver & push battery cover out.
   

2. Firstly, remove the battery cover , locate a sticker to remove, and use a sharp object to remove the retaining pin. Once removed, the Padlock shackle is now removable.
   

3. Replace with the long shackle and place the retaining pin and sticker back in the original position. Ensure that the long shackle remains in the opened position.
   

4. Secure the battery cover by turning the torx cap counter-clockwise 90° with the Torx Screwdriver while the Padlock is unlocked.
   Push the shackle in and you’re done!
   

Replacing Batteries

1. Unlock the Padlock and pull the shackle to the open position.
   

2. Turn Torx cap clockwise 90° with the Torx Screwdriver & push battery cover out.
   

3. Replace the CR2 Battery, close battery cover and turn Torx cap counter-clockwise 90°.
   

4. Push the shackle to close position to auto-relock or manual relock.
   

App Onboarding

1. Test Factory PIN Unlock
   In the factory mode (before pairing), the PIN to unlock the lock is 1 2 3 4 5 6 7 8 9 0

2. Register as a Lock User
   a) Download igloohome from the App Store / Play Store
   b) Create an account and log in

3. Pairing
   a) Select [Add new igloohome lock]
   Note: For existing users with other paired locks, go to [Configuration], select [Add Locks] and follow the instructions.
   

4. Setting Master PIN Code
   Before proceeding, turn on your Bluetooth and ensure that you are within the Bluetooth range of the lock.
   Go to [Access] and customize your [ Master PIN] by editing it.

 Managing Access in App

1. Creating PIN codes
   PIN codes can be generated on the app under [Access], press [New Key] and choose either One-Time, Permanent or Duration PIN.
   Pin codes will expire if its not use within their activation period. Refer to the table below.

Note: Duration PIN code end times can be customized within a 28-day timeframe. Past this timeframe, the end time will automatically be configured to the start time.

2. Bluetooth Guest Key
   Bluetooth Guest Key can be shared with other users for mobile access. It allows your guests to unlock the igloohome smart lock via Bluetooth.
   There are 3 steps to using a Shared Bluetooth Key
   1. Under
   [Access], press [New Key] and choose [Bluetooth Key] under
   [Access Type]. Proceed to share the key after it is created.
   2. Guest receives the Bluetooth Key by one of these methods:
   • Clicking the URL given and follow the instructions.
   • Claiming Bluetooth Key under [Configuration].
   3. Guest can now use the Bluetooth Key under the Guest Bluetooth Key Section whenever he/she is within range of the lock.
   Notes:
   • The owner can revoke the Bluetooth Key in App.
   • Bluetooth Key must be accepted within 1-hour generation before it expires.

Unlocking

a) Bluetooth Unlock

1. Open your igloohome app
2. Tap on the “Bluetooth Unlock” button
3. The status indicator will flash green twice with 4 short ascending tones once unlocked.

b )PIN Code

1. Press any button on the keypad to wake device up
2. Key in a valid PIN code (with or without masking pins) followed by the “Unlock Icon”
3. The status indicator will flash green twice with 4 short ascending tone once unlocked.

Locking

a ) Auto Relock
Simple close the shackle in place and Status Indicator will show green with a long beep.

b ) Manual Relock
Press and hold the Unlock icon on the bottom right of the keypad for 2 seconds until the status indicator will show green with a long beep.
Note: Used when Auto Relock is “Off”

Lock Behaviour

Note: User is able to Enable and Disable Keypad Security Lockout via Bluetooth.

Keypad Security Lockout

Triggered by| 5 consecutive PIN Code attempts by default
(Configurable via Bluetooth)
Disable By| 5 consecutive PIN Code attempts by default
(Configurable via Bluetooth)
Behavior| Single flash White LED on keypad and Red LED on the status indicator when the keypad is triggered.
Duration| Please refer to the table below.
Triggered| Security Alarm| Keypad Lockout
---|---|---
1st Time| 30 Sec| 1 Min
2nd Time| 60 Sec| 5 Min
3rd and
Consecutive Time| 90 Sec| 10 Min

9V Jumpstart

1. 9V Jumpstart Feature
   1. Touch and hold the battery contacts against the 9V jumpstart pin on the lock.
   2. While holding the 9V battery to the jumpstart, press in PIN code on the keypad followed by or Bluetooth Key to unlock.

Please ensure terminals of the 9V battery are in contact with the JumpStart contact points of the Padlock for 2 seconds to activate the padlock.

Audio and LED indications

and flash Green LED 2 times
Successfully Locked| 1 long beep after Padlock is locked and
Green LED for 2 seconds
Incorrect PIN| 4 short beeps and flash Red 2 times
Deleted PIN| 3 sets of 4 short beeps and flash Red 2 times
Obstruction Mann| 6 sets of 4 short beeps
Security Lockout
Mann| Low – High siren for 30 / 60 / 90 seconds
Security Lockout D

Deactivated

| 2 long beeps
Low Battery Alert| Descending 3 fast tones when the keypad is woken
up and breathing Red LED
Hard Reset / Unpair| Descending 4 slow tones
Power Start-Up| 2 slow beeps then 2 quick beeps

Troubleshoot

I am unable to close the shackle to lock the padlock.

• Do an unlock via PIN code or Bluetooth and try to close the shackle again.
• Note that you might accidentally lock the padlock manually by holding the UNLOCK button for 2 seconds when the padlock is open.

I am unable to turn the Torx Cap to remove the battery cover.

• Make sure the Padlock is unlocked before you turn the Torx cap, to remove the batter cover.
• Note that the Torx cap cannot be turned while the Padlock is locked.

The padlock keypad flashes white and the LED indicator flashes red when I activate the keypad.

• Keypad Security Lockout is triggered on the Padlock.
• Please refer to page 14.

I tried to use a 9V Battery to jumpstart the lock but was unable to.

•  Please ensure terminals of the 9V battery are in contact with the JumpStart contact points of the Padlock for 2 seconds to activate the padlock.
•  The 9V Battery terminals must be in constant contact with the padlock 9V contact pins while unlocking it with PIN code or Bluetooth.

The lock is not responding at all.

• The Padlock’s battery is flat.
• Use an Alkaline 9V Battery to jumpstart the lock and unlock the Padlock to replace the batteries.
• Refer to page 8 to know how to replace batteries.

I closed the shackle but the padlock did not relock automatically.

• Make sure Auto Relock is ON via the igloohome mobile app.
• If Auto Relock is ON and the padlock is still not working, try to lock the padlock manually by holding the UNLOCK button for 2 seconds.

I tried to unlock the Padlock but the keypad went off and came back on with 2 slow and 2 quick beeps.

• The Padlock is low in battery.
• Use an Alkaline 9V Battery to jumpstart the lock and unlock the Padlock to replace the batteries.
• Refer to page 8 to know how to replace batteries.

I can’t scan the QR sticker as it is worn out.

• Use the spare QR sticker that is provided in the Padlock box.

I have generated my PINs from the app but it cannot work.

• Do a Bluetooth Unlock or sync and try again.
• Make sure that the generated PIN codes are activated within the activation period before they expired.

For enquiries go to:
igloohome.co/support

References

• Support | igloohome Support & Help Portal

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>