Boult Audio ProBass FLuidX Wireless Bluetooth Over the Ear Headphone User Manual

PROBASS FLUIDX
USER MANUAL

Please refer to the Safety Precautions mentioned on the last page of this manual before operating this device.

Pairing for the first time

Step 1: Make sure the product is fully charged.
Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power on the headphones and it will indicate with flashing red & blue LED light.
Now, the headphones are in pairing mode & ready to connect with your device.
Step 3: Turn on the Bluetooth on your device & scan until you see ”Boult Audio Pro bass”
Step 4: Click on “Boult Audio Pro bass” and pair your device with the headphones. Once paired, the headphones will indicate with flashing blue LED light every 2 seconds.
Now, you can enjoy your music & calls.

uto-pairing Mode (Re-pairing with your device)

Step 1: Turn on the Bluetooth on your device.
Step 2: Press and hold the multi-function button for 3-4 seconds (approximately) to power on the headphones.
Step 3: The headphones will connect to your same device automatically and it will indicate with blue LED light on the headphones.
If not, connect to “Boult Audio Pro bass” in the Bluetooth settings on your device.

Charging the headphones

Charging the headphones

• Use only a 5V/1A USB charger to charge this product.
• This product or the Bluetooth functions cannot/should not be used during charging.
• This headphone will indicate with quick flashing red LED light every 4 seconds when the headphone’s battery needs to be charged.
• Solid red LED light will indicate on the headphones while charging.
• A solid red LED light will turn off on the headphones while charging when the charging is complete.

Functions

• Play/Pause music
  A single click on the multi-function button to play/pause the music.
  

• Answer/End/Reject calls
  A single click on the multi-function button to answer/end a call.
  Press & hold the multi-function button for 2 seconds to reject the incoming call.

• Change music track
  A single click on the (<) volume button to change the music track to the previous track.
  Single click on the N) volume button to change the music track to the next track.

• Increase/Decrease volume
  A single click on the (-) volume button to decrease the volume.
  A single click on the (+) volume button to increase the volume.

• Switch ON/OFF
  Press and hold the multi-function button for 3 seconds (approximately) to power on the headphones.
  Flashing red & blue LED lights will indicate on the headphones when powered on and not connected.A
  Blue LED light will indicate on the headphones once it is paired with your device.
  Press and hold the multi-function button for 3 seconds (approximately) to power off the headphones.
  The Red LED light will flash and the headphones will get switched off.

Safety Precautions

Please make sure to follow the instructions provided in this manual for your safety and to extend the life of the headphones.

• Please keep this device away from extreme heat, humidity, or corrosive environment.
• Please don’t over-charge the headphones as it will decrease the service life of the battery.
• Please use only a good-quality phone charger (5V/1A) or USB charging port to charge the headphones.
• This product or the Bluetooth function should not be used during charging.

Watch the VIDEO tutorial at
boultaudio.com/howto7
OR
Call us at +91 8595516267
& enter code 07 for a personalized
training session or queries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>