FEIT SHOP2_840_50_MOT_BAT Rechargeable 2ft LED Shop Light Motion Detection Installation Guide
- June 7, 2024
- Feit
Table of Contents
FEIT SHOP2_840_50_MOT_BAT Rechargeable 2ft LED Shop Light Motion Detection
Installation Guide
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store, call Feit
Electric Customer Service 8 a.m. – 5 p.m., PST, Monday – Friday
1-866-326-BULB (2852)
FEIT.COM
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Rechargeable LED Shop Light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Felt Electric.
Important Safety Information
Read and understand all Safely and Operating instructions in this manual before using this product. Follow all safe guards stated In this manual, In addition to normal safety precautions in working with electrical devices.
-
Do not place near any heat source.
-
To reduce the risk of electrical shock, do not put in water or other liquid. Do not place or
store product where it can fall or be pulled into a tub or sink. -
Do not crush or incinerate.
-
Do not insert foreign objects into this product.
-
To reduce the risk of fire, keep away from combustible materials while in operation.
-
To reduce the risk of injury, close supervision is necessary when this product is used near children.
-
Do not attempt to repair, disassemble or modify under any circumstances.
-
Check for damage prior to each use of the product.
-
LED’s are not
WARNING: RISK OF SHOCK. House electric anent can cause pailful shock or serious injury unless handled property.
**WARNING:** Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SAVE THESE INSTRUCTIONS
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Supplier’s Declaration or Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique identifier:
SHOP2/840/50/MOT /BAT
Limited Warranty
This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase. If the product fails within the warranty period, replacement or refund is your sole remedy. Except to the extent prohibited by applicable law, any implied warranties are limited in duration to the duration of this warranty. Liability for incidental or consequential damages is hereby expressly excluded. Some states and provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
SPECIFICATIONS
PRODUCT
The performance specifications (lumens, watts, life and CCT) should only be considered an approximation of expected performances.
PARTS INCLUDED
NOTE : Hardware not shown to actual size.
LED Shop Light Installation
Operating Instructions
1. Choose Light Output
Set the power switch to the desired setting.
High:
The shop light will tum on at 1000 lumens. Runtime: 6 hours.
Low:
The shop light will tum on at 300 lumens. Runtime: 20 hours.
OFF:
The shop light will stay off, regardless of motion.
2. Toggle Motion Activation
Set the motion activation switch to the desired setting.
OFF:
Motion activation is disabled.
The shop light will stay on until the power switch is set to off or the
battery is discharged.
ON:
Motion activation is enabled.
The shop light will tum on when motion is detected. After not sensing motion
for 1 minute, the shop light will tum off.
Motion will be detected 8 ft away from the PIR Sensor when the shop light is mounted at the optimal height of 9 ft.
3. Charge the Shop Light
When batteries are low, the LED indicator light will blink red when the shop light is on.
- Connect the included power cord (BB} to the charging port. Plug the power cord into a 120V outlet to recharge the built-in battery.
- When the shop light is charging, the LED indicator light will be a solid red.
- When the shop light is completely charged, the LED indicator light will tum off.
Approximate charging time: 9 hours.
WWW.FEIT.COM
Please contact 1-866-326-BULB {2852) for further assistance.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>