Neomounts M1700E Plasma Floor stand Instruction Manual
- June 7, 2024
- Neomounts
Table of Contents
BY NEWSTAR
INSTRUCTION MANUAL
PLASMA-M1700E
Floor stand
PLASMA-M1700E
PARTS
STEP 1
Assemble the base
STEP
2
Place the covers on the base
STEP 3
Attach the pole to the base
STEP 4
Install the VESA plate
STEP 5
Assemble the shelf
STEP 6
Attach the shelf to the bottom of the mount
STEP
7
Assemble the plateau
STEP 8
Install the plateau to the top of the mount
STEP 9
Install the cable clips
STEP 10
Install the adapter brackets
OPTION
Use spacers if necessary
|
---|---
STEP 11
Attach the mount to the TV and tighten the screws
|
---|---
STEP 12
Route the cables through the rod
CAUTION
-
To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
-
The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
-
The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
-
It is recommended that the mount be installed by qualified personnel only.
-
At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
-
Please carefully inspect the area where the mount is to be installed:
– Avoid places that are subject to high temperatures, humidity, or contact with water.
– Do not install the product near air conditioning vents or areas with excess dust and fumes.
– Only install on vertical walls and avoid slanted surfaces.
– Do not install in places subject to any shock or vibration. – Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel. -
Maintain sufficient space around the display to ensure adequate ventilation.
-
To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
-
The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or another strong shock.
-
Do not modify any accessories or use broken parts. Contact your dealer with any questions.
-
Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
-
Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
-
Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
-
Please consult the English language manual for any dispute on conditions.