ACURITE 00888 Thermometer with Probe Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
Instruction Manual
Thermometer with Probe
model 00888
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using
this product. Locate the tab and peel it off to remove it.
Package Contents
- Display unit
- Instruction Manual
Features & Benefits
DISPLAY
-
IN/OUT Switch
Slide to view current indoor (display) temperature or current outdoor (probe) temperature. -
Current Temperature
-
MIN/MAX Button
Displays high & low records. -
CLEAR Button
-
LIGHT Button
Activates momentary backlight. -
Probe Temperature Sensor
-
Fold-out Tabletop Stand
-
Battery Compartment
-
°F/°C Switch
Slide to select °F or °C temperature units. -
Integrated Hang Hole
For easy placement.
SETUP
Install or Replace Battery
AcuRite recommends high-quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not
recommended.
- The slide battery compartment covers off and installs 1 fresh “AAA” battery. Follow the polarity (+/-) diagram.
- Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior
to battery installation. Remove batteries from equipment that is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the
battery compartment. Promptly remove dead batteries from the device. Dispose
of used batteries properly. Only batteries of the same or equivalent type as
recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose
of batteries in free, as batteries may explode or leak. DO NOT mix old and new
batteries or types of batteries (alkaline/standard). DO NOT use rechargeable
batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit
the supply terminals.
OPERATION
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and temperature probe are critical to the accuracy and performance of this product.
Display Unit & Probe Placement
Place the display unit in a dry area free of dirt and dust. The display unit
stands upright for tabletop use or is wall-mountable.
To observe outdoor temperatures, the wired temperature probe must be placed
outside. The probe sensor can be securely mounted to a surface utilizing the
adhesive pad or the integrated hang hole. Take care not to damage the sensor
during mounting.
Important Placement Guidelines
To ensure accurate temperature measurement, place units out of direct
sunlight and away from heat sources or vents.
The wired temperature probe is not waterproof and is not intended for
permanent submersion in liquids. Submersion in liquid for more than 30 seconds
may result in the complete failure of the probe.
High & Low Records
High and low values are recorded for display (indoor) and probe (outdoor)
temperature. High and low records reflect the minimum and maximum temperature
recorded since the unit was powered on since the battery was changed, or since
it was manually reset (whichever was most recent).
To view the HIGH-temperature record, press and release the “MIN/MAX” button.
The “MAX” icon appears on the display next to the high records. To view the
LOW-temperature record, press and release the “MIN/MAX” button twice. The
“MIN” icon appears on the display next to the low records.
To reset the LOW records, press the “CLEAR” button while viewing the low
records. Dashes will display to confirm low values have been cleared.
To reset the HIGH records, press the “CLEAR” button while viewing the high
records. Dashes will display to confirm high values have been cleared.
Specifications
TEMPERATURE RANGE| Display: -4°F to 122°F; -20°C to 50°C Probe: -40°F to
158°F; -40°C to 70°C
---|---
POWER| Display: 1 x AAA alkaline battery
Troubleshooting
Inaccurate temperature| · Make sure both the display unit and
sensor are placed out of direct sunlight and away from any heat sources or
vents (see page 2).
---|---
Display screen not working| · Check that the battery is installed
correctly. The battery may need to be replaced.
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the
following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Customer Support
AcuRite customer support is committed to providing you with best-in-class
service. For assistance, please have the model number of this product
available and contact us in any of the following ways:
24/7 support at www.AcuRite.com
► Installation Videos
► Register your Product
► Instruction Manuals
► Support User Forum
► Replacement Parts
► Submit Feedback & Ideas
Limited One Year Warranty
At AcuRite, we proudly uphold our commitment to quality technology. Chaney
Instrument Co. warrants that all products it manufactures be of good
material and workmanship and to be free of defects when properly installed
and operated for a period of one year from the date of purchase. We recommend
that you visit us atwww.AcuRite.com for the
fastest way to register your product. However, product registration **does
not eliminate the need to retain your original proof of purchase in order to
obtain warranty benefits.**
Chaney Instrument Co. warrants that all products it manufactures to be of good
material and workmanship and to be free of defects when properly installed and
operated for a period of one year from the date of purchase. Remedy for breach
of this warranty is limited to repair or replacement of the defective item(s).
Any product which, under normal use and service, is proven to breach the
warranty contained herein within ONE YEAR from date of sale will, upon
examination by Chaney, and at its sole option, be repaired or replaced by
Chaney. Transportation costs and charges for returned goods shall be paid for
by the purchaser. Chaney hereby disclaims all responsibility for such
transportation costs and charges. This warranty will not be breached, and
Chaney will give no credit for products it manufactures which have received
normal wear and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired or altered by
others than authorized representatives of Chaney.
The above-described warranty is expressly in lieu of all other warranties,
express or implied, and all other warranties are hereby expressly disclaimed,
including without limitation the implied warranty of merchantability and the
implied warranty of fitness for a particular purpose. Chaney expressly
disclaims all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. Chaney
further disclaims all liability from personal injury relating to its products
to the extent permitted by law. By acceptance of any of Chaney’s products, the
purchaser assumes all liability for the consequences arising from their use or
misuse. No person, firm, or corporation is authorized to assume for Chaney any
other liability in connection with the sale of its products. Furthermore, no
person, firm, or corporation is authorized to modify or waive the terms of
this paragraph, and the preceding paragraph, unless done in writing and signed
by a duly authorized agent of Chaney. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
For in-warranty claims:
Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147
It’s more than accurate, it’s AcuRite offers an extensive assortment of
precision instruments, designed to provide you with information you can depend
on to Plan your day with confdence™.
www.AcuRite.com
Printed in China
00888 INST 072314
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
technology.
Visit www.AcuRite.com/patents for details.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>