CHAUVET Professional ML5 IP Tester Portable Tool Capable User Guide
- June 16, 2024
- Chauvet Professional
Table of Contents
CHAUVET Professional ML5 IP Tester Portable Tool Capable
Product Information
Specifications
- Model ID: IPTESTER
- Compact and impact-resistant ABS plastic case
- Rubber feet for stability during use
Mounting
- The IP Tester has a compact and impact-resistant ABS plastic case with rubber feet for placing on a flat and stable surface during use.
Frequently Asked Questions
- Q: How do I access the product page, warranty terms, and the complete User Manual?
- A: Scan the QR code provided in the manual to access the product page, warranty terms, and the complete User Manual.
- Q: How should I disconnect the product from power during periods of non-use?
- A: To eliminate unnecessary wear and improve its lifespan, completely disconnect the product from power by either using a breaker or unplugging it.
- Q: How should I mount the IP Tester?
- A: The IP Tester has a compact and impact-resistant ABS plastic case with rubber feet. Place it on a flat and stable surface during use.
- Q: What are the functions of the control panel buttons?
- A: The control panel buttons have the following functions:
- Navigates upwards through the menu list or increases the numeric value when in a function
- Exits from the current menu or function
- Navigates downwards through the menu list or decreases the numeric value when in a function
- Navigates leftwards through the menu list
- Enables the currently displayed menu or sets the currently selected value into the selected function
- Navigate rightwards through the menu list
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the IP Tester.
- ALWAYS:
- Disconnect from power before cleaning the product.
- Connect this product to a grounded and protected circuit.
- DO NOT:
- Connect this product to a dimmer or rheostat.
- Operate this product if the housing, hose, or cables appear damaged.
- Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it (adhere to standards for the published IP rating).
- The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- In the event of a serious operating problem, stop using immediately.
What is Included
- IPTester
- Neutrik® powerCON® TRUE1 power cable
- USB cable
- 2 condensation valve blanks
- Condensation valve remover tool
- M12 threaded brass nozzle with push-to-connector fitting
- Quick Reference Guide
AC Power
- This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
---|---|---|---|
AC Live | Black | Brown | Yellow/Brass |
AC Neutral | White | Blue | Silver |
AC Ground | Green/Yellow | Green/Yellow | Green |
Warning: To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Mounting And Panel Description
Mounting
- The IP Tester has a compact and impact-resistant ABS plastic case with rubber feet for placing on a flat and stable surface during use.
Control Panel Description
Button | Name | Function |
---|---|---|
**** | < UP> | Navigates upwards through the menu list or increases the |
numeric value when in a function
| < MENU>| Exits from the current menu or function
**| < DOWN>| Navigates downwards through the menu list or decreases
the numeric value when in a function
**| < LEFT>| Navigates leftwards through the menu list
**| < ENTER>| Enables the currently displayed menu or sets the
currently selected value into the selected function
**| < RIGHT>| Navigates rightwards through the menu list
Contact Us
General Information / Technical Support
Chauvet World Headquarters
- Address: 3360 Davie Rd. Davie, FL 33314
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll Free: 800-762-1084
- Voice: 844-393-7575
- Fax: 954-756-8015
- Email: chauvetcs@chauvetlighting.com
- Website: www.chauvetprofessional.com
Chauvet U.K.
- Address: Pod 1 EVO Park Little Oak Drive, Sherwood Park Nottinghamshire, NG15 0EB UK
- Voice: +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
- Email: UKtech@chauvetlighting.eu
- Website: www.chauvetprofessional.eu
Chauvet Benelux
- Address: Stokstraat 18 9770 Kruishoutem Belgium
- Voice: +32 9 388 93 97
- Email: BNLtech@chauvetlighting.eu
- Website: www.chauvetprofessional.eu
Chauvet Germany
- Address: Bruno-Bürgel-Str. 11 28759 Bremen Germany
- Voice: +49 421 62 60 20
- Email: DEtech@chauvetlighting.de
- Website: www.chauvetprofessional.eu
Chauvet Mexico
- Address: Av. de las Partidas 34 – 3B (Entrance by Calle 2) Zona Industrial Lerma Lerma, Edo. de México, CP 52000
- Voice: +52 728-690-2010
- Email: servicio@chauvet.com.mx
- Website: www.chauvetprofessional.mx
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U. K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
Scan the QR code to access the product page, warranty terms, and the complete User Manual
Documents / Resources
|
CHAUVET Professional ML5 IP Tester Portable Tool
Capable
[pdf] User Guide
ML5 IP Tester Portable Tool Capable, ML5 IP, Tester Portable Tool Capable,
Portable Tool Capable, Tool Capable
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>