EVA LOGIK NHT06 Wi-Fi Countdown Timer Switch User Guide
- June 3, 2024
- EVA LOGIK
Table of Contents
Wi-Fi Countdown Timer Switch
How it Works
NHT06 Wi-Fi Countdown Timer Switch
Specifications:
Power: 120VAC, 60Hz / Tungsten: 1200W
Resistive: 1800W / Motor: 1/2 HP
Time Delay: 5, 10, 30, 60 mins, 2 ort 4 hours
Humidity: 95% RH, non-condensing
Operating Temperature: 32° to 131° F (0° to 55° C)
Switch x1
Wiring x1
If you have any questions, please contact us at
[email protected]
and www.nie-tech.com
A Download the app
Scan the QR code above or search Smart Life on the Apple App Store or on Google Play
B Technical Guidance
| Amazon-Echo | Google-Home |
|---|
https://nie-tech.com/wp-content/uploads/2018/12/Quick-Guide-of-Using-Amazon- Echo-To-Control-Smart-Devices-V1.02.pdf| https://nie-tech.com/wp- content/uploads/2018/12/Quick-Guide-of-Using-Google-Home-to-Control-Smart- Devices.pdf
The Wi-Fi Countdown Timer Switch can be also used with Amazon Echo and Google Home. Please scan the QR code below and follow the instructions if you have any trouble pairing with them.
C EASY TO SET UP
D Voice control
Compatible with Amazon
Alexa and Google Assistant
Follow the steps in the Amazon Alexa or Google Assistant app to connect the Smart Life app or select “Support” in the Smart Life app
FCC warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, (2) This device must accept any interference received, including
interference that may cause undesired operation. changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment should be
installed and operated with minimum distance 20cm between the radiator& your
body.
CAUTION – PLEASE READ!
This device is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician.
MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/Off status of Medical and/or Life Support equipment.
OTHER WARNINGS
Risk of Fire / Risk of Electrical Shock / Risk of Burns
IMPORTANT SAFETY INSTRUCTIONS
-
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
-
Read and follow all instructions that are on the product or provided with the product.
-
do not use an extension cord.
-
Reference the National Electrical Code, NFPA 70, specifically for the installation of wiring andclearances from power and lighting conductors.
-
Installation work and electrical wiring must be done by qualified person(s) in accordance with allapplicable codes and standards, including fire-rated construction.
-
do not install or use within 10 feet of a pool
-
do not use in a bathroom
-
WARNING:
Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit andcord do not interfere with completely closing the receptacle cover. -
WARNING:
Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface -
WARNING:
Risk of Electric fire. install only to a receptacle protected by 20A branch circuit over current protection.
SAVE THESE INSTRUCTIONS
This manual contains important safety and operating instructions.