HIKVISION DS-PDSKM-VG3 Wired Seismic Detector User Manual
- June 3, 2024
- Hikvision
Table of Contents
HIKVISION DS-PDSKM-VG3 Wired Seismic Detector
Appearance
-
Screw Cover
-
Screw
-
Terminal
-
Resistor Jumper
-
DIP Switch
-
LED Indicator
Alarm: Solid Blue for 3s
Noise Intensity: Flashing Red -
Tamper Button
DIP Settings
Installation
Resistor Wiring
Relay Status
| Normal | Alarm | Fault | Tamper | |
|---|---|---|---|---|
| Alarm Relay | Close | Open | Close | Close |
| Fault Relay | Close | Close | Open | Close |
| Tamper Relay | Close | Close | Close | Open |
-
Method 1 : Use the jumper to select EOL (End of Line) resistance on
FAULT/TAMPER/ALARM pins. -
Method 2 : Add the resistor to FAULT/TAMPER/ALARM wiring ports.
Note: If EOL wiring is not used, leave the jumpers OFF. Do not force the jumper if it is not matched the pin. Method 1 & 2 should not be used on the
ALARM/TAMPER at the same time.
- Alarm Resistance: 1K, 2K2, 4K7, 5K6, 6K8
- Tamper Resistance: 1K, 2K2, 4K7, 5K6
- Fault Resistance : 1K, 2K2, 5K6
Connection Type
Note : The resistor must be connected in series with one end of the detector.
- Normally Closed
- Single End of Line Wiring
- Double End of Line Wiring
- Triple End of Line Wiring
Specification
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change, without notice, dueto firmware updates or other reasons. Please find
the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product. and other Hikvision’s trademarks and logos
are the properties of Hikvision in various jurisdictions. Other trademarks
andlogos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS”AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESSOR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OFTHE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT,TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OFTHE PRODUCT, EVEN IF HIKVISION HASBEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OFTHE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIESFOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILLPROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE
THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY
RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THEAPPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOESNOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,
RIGHTS OFPUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER
PRIVACY RIGHTS.YOU SHALL NOT USE THIS PRODUCTFOR ANY PROHIBITED END-USES,
INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICALWEAPONS, ANY ACTIVITIES IN
THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR
IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS
- This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive
- 2014/53/EU, the EMC Directive 2014/30/EU, the RoHSDirective 2011/65/EU.
- 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
- 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
CAUTION
- Install the equipment according to the instructions in this manual.
- This equipment is not suitable for usein locations where children are likely to be present.
- This equipment is suitable foruse in gang box or other encloslure protected device only.
- To prevent injury, this equipment must be securely attached to the floor/wall in accordance with the installation instructions.
- No naked flame sources, such as lighted candles, should be placed on the equipment.
- The equipment has been designed, when required, modified for connection to an IT power distribution system.
- A readily accessible disconnect device shall be incorporated external to the equipment.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Burned fingers when handling the device. Wait one-half hour after switching off before handling the parts.
- Useonly power supplies at the standard of100 VAC to 240 VAC, 50/60 HZ.
- The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment.
Ensure correct wiring of the terminals for connection to an AC mains supply. indicates hazardous live and the external wiring connected to the terminals requires installation by an instructed person
Legal and Regulatory Information
References
- HOME
- Hikvision - Leading Video AIoT Solutions & Services Provider
- HOME
- Hikvision USA - Leading the future of AIoT