HIKVISION UD28151B Video Intercom Villa Door Station User Manual

HIKVISION UD28151B Video Intercom Villa Door Station

Appearance

1. Microphone
2. Camera
3. Indicator
4. Buon
5. Card Reading Area
6. Loudspeaker
7. Terminals
8. Debugging Port
9. TAMPER
10. Set Screw
11. TF Card Slot
12. Network Interface

Note: The debugging port is used for debugging only.

Indicator Description
Unlock: Green
Call: Orange
Communicate: White

Terminal and Wiring

NC: Door Lock Relay Output (NC)
NO: Door Lock Relay Output (NO)
COM: Common Interface
AIN1 : For the access of Door Contact
AIN3: For the access of Exit Button
AIN2 &AIN4: Reserved
485-: RS-485 Interface (Reserved)
485+: RS-485 Interface (Reserved)
12 VDC IN: Power Supply Input
GND: Grounding

Installation Accessory

1. Mounting Template2
2. Mounting Plate

Note: The dimension of the Mounting plate is 102.58 mm × 39.24 mm × 6.2 mm.

Installation

Note: Video intercom villa door station supports surface Mounting .
Before You Start

• Make sure all related equipment’s are power-off during the installation.
• Tools that you need to prepare for installation: Drill (ø2.846) and gradient.
• Purchase the protected shield before installation.

Surface Moong without Protected Shield

1. Stick the Mounting template on the wall. Drill screw holes according to the Mounting template. Remove the template from the wall.
2. Secure the Mounting plate on the wall with 4 supplied screws according to the screw holes.
3. Install the villa door station to the Mounting plate. Fix the device on the Mounting plate with the set screw.

Surface Mounting with Protective Shield

1. Stick the Mounting template on the wall. Drill the screw holes according to the mounng template. Remove the template from the wall.
2. Align the Protective shield with the Mounting template. 3
3. Secure the Mounting plate and Protective shield on the wall with 4 supplied screws according to the screw holes.
4. Install the villa door station to the mounting plate. Fix the device on the mounting plate with the set screw.

Configuration via Web

![HIKVISION UD28151B Video Intercom Villa Door Station

Configuration via Web](https://manuals.plus/wp-content/uploads/2022/12 /HIKVISION-UD28151B-Video-Intercom-Villa-Door-Station-User-Manual-10.png)

1. Activate Device via Web
   You are required to activate the device first by sings a strong password before you can use the device.
   Default parameters of door station are as follows:
   Default IP Address: 192.0.0.65.
   Default Port No.:8000. Default User Name: admin
   (1)Power on the device, and connect the device to the network. 2
   (2)Enter the IP address into the address bar of the web browser, and click Enter to enter the activation page.
   Note: The computer and the device should belongs to the same subnet.
   (3)Create and enter a password into the password field.
   (4)Confirm the password.
   (5) Click OK to activate the device.
   Note: When the device is not activate, the basic operation and remote configurator of device cannot be performed.

2. Access to the Device by Web Browsers
   (1)In the browser address bar, enter the IP address of the device, and press the Enter key to enter the login page.
   (2) Enter the user name and password and click Login.

3. Communicate with Indoor Station
   (1) Click Seng’s -> Intercom -> Press Buon to Call to enter the sengs page.
   (2)Set the parameters.
   ● Edit call No. for every buon.
   ● Check Call Management Center to set the buon calling center.
   Note: If you check Call Management Center and set the call No. as well, call management center has higher privilege than call No.\
   (3) Press buon to call indoor staon.

4. Issue Card
   (1) Click Sengs -> Access Control and Elevator Control to enter the sengs page.
   (2)Click Issue Card. Present the card on the card reading area.
   (3) When issuing finished, the windows pop up on the sengs page.
   Note: Only Mifare card supported, and Mifare card with non-standard shape is recommended. Up to 10000 cards can be issued and managed by V series door staon. A voice prompt (No more cards can be issued.) can be heard when the issued card amount exceeds the upper limit

5. Unlock Door
   After issuing cards, you can unlock the door by presenting the issued cards.
   Refers to Video Intercom Villa Door Station User Manual (scan the QR code) for details.

©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change, without noce, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.
and other Hikvision’s trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER- ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END- USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU. 2012/19/EU
(WEEE directed): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific baery information. The baery is marked with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated collection point. For more information see:www.recyclethis.info
WARNING

• All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region.

• Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.

• Please make sure that the power has been disconnected before you wire, install or dismantle the device.

• When the product is installed on wall or ceiling, the device shall be firmly fixed.

• If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.

• If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself.
  (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.)
  CAUTION
  

• Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

• Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.

• The device cover for indoor use shall be kept from rain and moisture.

• Exposing the equipment to direct low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger).

• Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time.

• Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs..

References

• Hikvision - Leading Video AIoT Solutions & Services Provider
• HOME
• Hikvision USA - Leading the future of AIoT

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>