GoPro HERO9 Smart Remote 9 Black User Guide
- June 7, 2024
- GoPro
Table of Contents
GoPro HERO9 Smart Remote 9 Black User Guide
The First Step
You may need to upgrade your camera’s software before you can use The Remote. For step-by-step instructions, go to gopro.com/update.
The Basics
Charging
Flip open the USB-C port cover.
Insert the included USB-C cable into the port. Connect the other end of the cable to a computer or other USB power source.
Note: Be sure that the computer is connected to a power source. If the remote status screen does not indicate that the remote is charging, use a different USB port.
CAUTION: Be sure the USB-C port is dry before inserting the cable.
Powering On + Off
Wearing The Remote
ATTACHING YOUR REMOTE TO THE STRAP
The attachment strap lets you wear your remote on your wrist or attach it to a
grip, bike handlebars, backpack straps, and more.
Heads Up: The Remote is waterproof to 16ft (5m), but will not work under water.
Pairing The Remote and Your GoPro
The Remote can control up to 5 cameras at a time from up to 196 feet (60m) away in optimal conditions. Your camera recognizes only one remote at a time.
*Dependent on camera model, terrain, obstructions, electromagnetic interference, and environmental conditions.
PAIRING THE REMOTE WITH YOUR CAMERA
-
Power off The Remote.
-
On your camera, complete these steps:
a. From the rear screen, swipe down to access the Dashboard.
b. HERO9 Black—swipe left, and then tap Connections > Connect Device > The Remote.
HERO8 Black and MAX—tap Preferences > Connections > Connect Device > Remote.
Your camera will automatically begin pairing. -
Power on The Remote.
-
“Pair new” will appear on the remote’s screen. Press the Shutter button to start pairing.
CONNECTING AFTER PAIRING
Your remote and camera will automatically connect when both are on.
Make sure your camera’s wireless connections are on if they fail to connect.
Tap Preferences > Connections > Wireless Connections to turn on wireless.
Heads Up: Your camera cannot be connected to The Remote and the GoPro app at the same time. You must disconnect the app to connect The Remote or power off The Remote to connect the app.
RESETTING THE REMOTE
Press and hold the Mode and Shutter buttons simultaneously for 8 seconds if
you need to reset your remote.
WARNING: Do not use with The Remote while operating motor vehicles or while engaged in activities like biking, skateboarding, skiing, and surfing.
Capturing Video and Photos
PRO TIP: Mark favorite moments by pressing the Mode button on the remote during recording. This adds a HiLight Tag that makes those moments easier to find later.
THE FOLLOWING FEATURES ARE NOT AVAILABLE WHEN USING THE REMOTE WITH YOUR GOPRO
- QuikCapture
- Manual capture of multiple photos while recording video with multiple cameras
- GoPro app connectivity
To learn how to set screen orientation and control multiple cameras, visit gopro.com/advanced-remote-setup.
Regulatory Information
To see additional information regarding country certifications, refer to the Important Product + Safety Instructions included with your remote.
Visit gopro.com for more information
© 2020 GoPro, Inc. All rights reserved. Model: RMRU3
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>