FreshDecor 7 Tier Tree Book Shelf Instruction Manual

FreshDecor 7 Tier Tree Book Shelf

Specifications

• Product Name: FreshDecor TREE BOOKSHELF – WALL MOUNTED
• Materials: Pine Wood, Metal Hardware
• Package Contents: A x2, B x4, C x3, D x2, Concrete Wall Anchor x5, Drywall Anchor x5, Allen Wrench, Screw x5, Hex Socket Bolt x22

Product Usage Instructions:

Configuration Options:
This product can be configured in two different ways:

1. As a single tree bookshelf with 7 tiers
2. As two tree bookshelves with 3 tiers each

Assembly Steps:

1. Fasten Pine Wood Shelves together at pilot holes using the provided hex socket screws and allen wrench.
2. Measure the distance between the mounting hardware on the back of pine wood A and mark points on the wall for drilling.
3. Assemble shelves according to the desired configuration (7-tier or 3-tier).
4. Affix back piece (Pine Wood A) onto the assembled shelves using hex socket bolts and allen wrench. For a 7-tier configuration, both Pine Wood A pieces are to be combined vertically to form one larger unit.

Mounting Instructions:

For Concrete Wall:

1. Drill holes into marked points on the wall and tap in concrete wall anchors using a hammer.
2. Tighten screws into the anchors using a screwdriver to set up the TREE BOOKSHELF.

For Drywall:

1. Tighten drywall anchors into marked points using a screwdriver.
2. Tighten screws into the anchors to set up the TREE BOOKSHELF.

Final Steps:
Your TREE BOOKSHELF is now ready to be mounted. Follow the specific mounting instructions based on your wall type (concrete or drywall).

FAQ

Q: Can I use additional screws for mounting?
A: It is recommended to use only the provided screws and hardware for mounting the TREE BOOKSHELF to ensure proper installation and stability.

TREE BOOKSHELF – WALL MOUNTED

1. Fasten Pine Wood Shelves together at pilot holes using the provided hex socket screws and allen wrench.
2. Eight shelves are needed to make a 7-tier tree bookshelf (Four pine wood B, three pine wood C and one pine wood D)
3. Four shelves are needed to make a 3-tier tree bookshelf (Two pine wood B, one pine wood C and one pine wood D)
4. Affix back piece (Pine Wood A) onto the assembled shelves using hex socket bolts and allen wrench. For a 7-tier configuration, both Pine Wood A provide are to be combined vertically to form one larger unit.
5. For a pair of 3-tier configuration, the pine woods A are assembled separately as shown.
6. Measure the distance between the mounting hardware on the back of pine wood A and mark points on wall for drilling..

FOR CONCRETE WALL

• a Drill holes into  marked points on wall and using a hammer tap in concrete wall anchors into hole.
• b Tighten screws into the anchors using a screwdriver and you should be set up to hang the TREE BOOKSHELF

FOR DRYWALL

• a Tighten drywall anchors into marked points using a screwdriver.
• B Tighten screws into anchors and you should be set up to hang the TREE BOOKSHELF

YOUR TREE BOOKSHELF IS READY TO BE MOUNTED

NOTE: THIS PRODUCT CAN BE CONFIGURED IN TWO DIFFERENT WAYS

1. AS A SINGLE TREE BOOKSHELF WITH 7 TIERS
2. AS TWO TREE BOOKSHELVES WITH 3 TIERS EACH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>