FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual

June 7, 2024
FLAME BOSS

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual

WARNING: IMPORTANT SAFETY INSTRUCTIONS

It is important for the safety of persons to follow these instructions. Save these instructions. Follow all instructions, as incorrect usage can lead to injury or property damage.

Flame Boss Thermometer is intended for use only in dry locations, indoors or outdoors. Store the unit indoors in a dry location. If you know or suspect that the Flame Boss Thermometer has been submerged in water, do not use the unit. A USB adapter cable (USB Type A to USB Micro B) shall connect the Flame Boss Thermometer to a power supply.

Lithium ion batteries might cause damages like leaking, fire, or explosion when misused or defective. Failure to read and follow the below instructions may result in fire, injury, and damage to property if charged or used improperly.

Do not allow children to play with a Flame Boss Thermometer. Keep away from children.

Flame Boss Thermometer is not to be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.

Do not place or mount a Flame Boss Thermometer where it is exposed to excessive heat from a grill, smoker, oven, etc.

WHAT’S INCLUDED

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - WHAT’S
INCLUDED

INSTALL FLAME BOSS MOBILE APP

OPEN THE CAMERA APP ON YOUR TABLET OR SMARTPHONE AND POINT IT HERE:FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - QR
Codehttps://myflameboss.com/app

OR if you are unable to scan the code above, open the browser (Chrome or Safari, for example) on your tablet or smartphone and
enter the following address: https://myflameboss.com/app

Follow the instructions in the Flame Boss App to add a device and set up WiFi.

USING YOUR FLAME BOSS® WIFI THERMOMETER

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - USING YOUR FLAME
BOSS

Flame Boss WiFi enabled devices will automatically install updated firmware when connected to the Internet. To find an updated manual that might include new features, click the Manuals link in the mobile apps or go to www.flameboss.com/manuals.

DISPLAY
The LCD home screen shows individual temperatures or up to 4 temperatures in rotation, battery life, WiFi connectivity strength, and connectivity mode.

LCD Home Screen

ST or AP
Indicates which mode the device is in (Station/Access Point).

WiFi Signal Strength
Individual arcs in WiFi symbol indicates connection strength.

AP Indicator
Thermometer is in Access Point mode. If the AP indicator is solid, the thermometer is connected to your mobile device.

ST Indicator
Thermometer is in Station mode. If the ST indicator is flashing, the thermometer is trying to connect to your WiFi network and Flame Boss server. If the ST indicator is solid, the thermometer is online and connected to the Flame Boss server.

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - Pressing and releasing
the Setup button will switch the thermometer between Station and Access Point
modes

F & C
Indicates Fahrenheit or Centigrade operation on the display. To change the temperature scale, click the Temp Scale button under the thermometer ID on the Controllers tab of the mobile app.

Probe Identifier
Indicates which temperature jacks are in use (by number). A circle around the probe number will appear when that temperature is displayed.

Lightning Bolt
Indicates that external power is connected/charging. Flashing →­ Charging | Solid ­→ Fully Charged

FUNCTION

Power Button
Pressing the Power button turns thermometer on. Pressing and holding the Power button for 3 seconds turns thermometer off. Device is battery operated, but may be used while charging.

Select Button & Backlight
Pressing the Select button while the backlight is off will turn the backlight on for 30 seconds. If the backlight is on, pressing the Select button will manually rotate through the temperature readings if multiple probes are in use. The backlight will remain on when the thermometer is connected to the USB charger. By default, the temperature readings will change to the next probe every 3 seconds. Pressing and holding the Select button for at least 3 seconds will pause the display to hold on the current probe. To resume autorotating, press and hold the Select button for another 3 seconds.

PROBE PLACEMENT — COOKING GRATE

Using the combination of the grate clip and probe, clip the probe into place in between grate.

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - PROBE PLACEMENT —
COOKING GRATE

PROBE PLACEMENT — FOOD PROBE

Insert multipurpose probe into the thickest part of the meat avoiding any bone.

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - PROBE PLACEMENT — FOOD
PROBE

WALL MOUNTING (OPTIONAL)

The Flame Boss Thermometer may be hung on a vertical surface using two (2) #8 panhead screws spaced 3 1/8″ apart. The screw heads must remain a minimum of 1/8″ off the surface.

FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual - WALL MOUNTING
\(OPTIONAL\)

AMAZON ALEXA & GOOGLE ASSISTANT

Amazon Alexa Instructions
Download the Amazon Alexa application for your mobile device and sign into your Amazon account. Go to “Skills” on the Alexa app to search and enable the Flame Boss skill or simply speak to your Amazon Echo and say “Alexa, enable Flame Boss.” Now you can use a variation of the following voice commands:

Alexa, open Flame Boss
Alexa, ask Flame Boss for the temperatures
Alexa, ask Flame Boss for the Meat 1 temperature

Google Assistant Instructions
Download the Google Assistant or the Google Home application. Say a voice command using the Google Assistant app or simply speak to your Google Home using a variation of the following voice commands:

Ok Google, talk to Flame Boss
Ok Google, ask Flame Boss for the temperatures
Ok Google, ask Flame Boss for the Meat 2 temperature

This product contains ee_printf which includes the following notice: Copyright ‘ 2002 Michael Riga rd. All rights reserved. Redistribution and use in source and binary forms, with or without

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the project nor the names of its contributors may be used to endorse or promote products derived from this software

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

NOW ENJOY COOKING!

TECHNICAL SUPPORT
800-978-9078 | support@flameboss.com

CHECK US OUT ON THE WEB
FlameBoss.com | MyFlameBoss.com

SUBSCRIBE TO FLAME BOSS ON YOUTUBE

HOURS
9AM ­ 6PM EST | MONDAY ­ SATURDAY

FOLLOW US

@flamebosssmokes FLAME BOSS B08KWMPQXT WiFi Thermometer User Manual -
Cutting Meet

WWW.FLAMEBOSS.COM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals