Apps DDLock App For Smart Lock User Guide
- June 7, 2024
- APPs
Table of Contents
Apps DDLock App For Smart Lock
HOW TO PAIR YOUR LOCK
IMPORTANT
Before pairing your lock, please reset your lock and verify if the original
master code 123456 works. Then please turn on the Bluetooth in your phone’s
settings, wake up the keypad screen by touching it with your palm and keep the
screen always on during the pairing.
HOW TO REGISTER
Notes:
The DDLock App is required to operate the lock. After the lock is properly
installed, make sure this step is performed by the lock owner.
PAIRING YOUR LOCK
Notes
You may need to touch the keypad screen to wake up the keypad. After pairing
successfully, the master code will be changed to a random 7-digit number, and
you can change it to your master code in the App (Settings＞Basics＞Admin
password).
Installation Tips
IMPORTANT
Refer to the [step 1] to learn if the door is right-handed or left-handed.
Before tightening the interior assembly screws, test if it’s able to move the
thumb turn to lock/unlock. If not, please go back to [step 2] and reinstall.
If the direction of the slide switch is set incorrectly, it also can be
changed in the DDLockApp. (Settings>Door opening direction)
Right-handed door
Move the slide switch to “R” Turn the thumb to the Vertical position
Left-handed door
Move the slide switch to “L” Turn the thumb to the Horizontal position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>