HAVIT PJ202 1080P HD PROJECTOR User Manual

HAVIT PJ202 1080P HD PROJECTOR

PACKING LIST

NOTICE

FUNCTION OVERVIEW

QUICK START

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly.
4. Press the Power Button to turn on the projector.
5. Select the correct input source by pressing button.
6. Adjust the kickstand accordingly.
7. Adjust the keystone and focus ring on the best image performance.
8. Press the Power Button twice to turn off the projector.

INPUT SOURCE

Press on the projector or remote to enter the interface of Input Source.

• A. Multimedia Connection
• B. HD Connection
• C. VGA Connection
• D. Screen Mirroring

PROJECTOR CONNECTING

SCREEN MIRRORING

Know System Settings before Screen Mirroring

• Step 1: Press button “S” on the projector or press on the remote to enter the Input Source interface, then select Screen Mirroring.
• Step 2: In the interface of screen Mirroring, press OK to enter the WiFi selection interface.

iOS Connect by Cables

1. Connect the phone to the USB slot of the projector via the original iPhone charger cable. (Cable has USB port and Lighting port)
2. Click “Trust” when connecting with the iPhone

Android Cast

• Connect with Android Phone
  • Open the wireless display on your Phone.
  • Find the device named “HAVIT PJ202” and connect it.

iOS Cast

• Connect with iOS Phone via screen mirroring:
  • Open WIFI and find “HAVIT PJ202” from your phone. Then input the password “12345678” on your phone.
  • Click Airplay/Screen mirroring on your phone and connect “HAVIT PJ202”.
• Connect with iOS Phone via WIFI:
  • Press OK to enter the WIFI selection interface from the projector. Choose your WIFI and select password by remote control.
  • Connect the same WIFI from your phone.
  • Click Airplay/Screen mirroring on your phone and connect “HAVIT PJ202”.
    Note: To enter WiFi Selection interface, please press OK in the interface of Screen Mirroring.

Starting Screen Mirroring

Important: Before screen mirroring, please press button “S” on the projector or press to enter Input Source interface and select Screen Mirroring.

Screen Mirroring through Wireless Connection For iOS System

*Screen Mirroring via Router´s WiFi

1. Turn on the projector, select Screen Mirroring as the input source to enter the Screen Mirroring Interface.
2. Press OK to enter WiFi selection interface and connect the projector to your router´s WiFi with correct password
3. The WiFi icon on the interface will change from  to , and the router´s WiFi will be displayed on interface of Screen Mirroring after a successful connection.
4. Get back to the WiFi setting of your iOS mobile device, then connect it to the SAME router´s WiFi.
5. Activate Screen Mirroring/Airplay Mirroring on your iOS mobile device and search for the projector, then select HAVIT PJ202 from the searching results to connect.
6. The content of your iOS mobile device will be mirrored to the wall/screen after WiFi connection.

Tips:

1. If you´d like to connect another router´s WiFi, please press OK in the Screen Mirroring Interface, then repeat the procedures mentioned in the section of Screen Mirroring via Router´s WiFi.
2. If you already connected your projector with the WiFi and now you want to connect it with iOS device cellular data please go to the WiFi Selection, and disconnect the current WiFi connection the follow the steps in the section of
   Screen Mirroring via Cellular Data.

*Screen Mirroring via Cellular Data

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
2. Go to the setting of your iOS mobile device and connect it to the WiFi HAVIT PJ202 (password: 12345678)
3. Activate Screen Mirroring/Airplay Mirroring on your iOS mobile device and search for the projector.
4. Select HAVIT PJ202 from the searching results to connect.
5. The content on your iOS mobile device will be mirrored to the wall/screen vi cellular data after a successful connection.

For Android System

To activate this function, your Android device must support Multi- Screen/Wireless display. Names may differ from different devices.

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.

2. Turn on the WiFi switch in the Android device, and search for the projector´s WiFi “HAVIT PJ202” (Password: 12345678) to connect
   Note: Successful WiFi connection is not a must, but please make sure the WiFi is switch on.

3. Activate Cast/Multi-screen/Wireless Display/Screen Morring/Smart View function on your Android device, then connect to the WiFi “HAVIT PJ202”

4. The content on your Android device will be mirrored to the wall/screen after a successful connection.

For Windows 10 System

To activate this function, your Windows 10 device must support the Miracast feature.

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.

2. Turn ON the WiFi switch in your Windows 10 device.
   Note: Successful WiFi connection is not a must, but please make sure the WiFi is switch on.

3. Press the “Windows Logo+P” key combination on your keyboard to enter the PROJECT interface, then select “Connect to a wireless display” to search the projector.

4. Select HAVIT PJ202 from the searching results to connect.

5. The content on your Windows 10 device will be mirrored to the wall/screen after successful connection.

Notes:

1. The fluency of screen mirroring will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 3ft is recommended.
3. Some mobile devices may not support screen mirroring due t the compatibility.
4. Due to the copyright restriction from Hulu, Netflix, and similar services, the contents CAN NOT be mirrored or cast.
5. If the projected image freezes, please reboot the projector or press OK in the Screen Mirroring Interface to go to the WiFi Selection Interface and disconnect the current WiFi connection and re-connect the Home WiFi.

Screen Mirroring through Wired Connection

For iOS System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.
2. Connect your iOS mobile device to the USB port of the projector with the ORIGINAL lighting cable.
3. Select Trust in the pop-up window of Trust This Computer?
4. The display of your iOS mobile device will be mirrored to the wall/screen after a while.

Tip:
If the projection fails, please unplug the lighting cable from the projector or reboot the projector, then repeat the steps mentioned above.

For Android System

1. Turn on the projector, select Screen Mirroring as the input source to enter the interface of Screen Mirroring.

2. Go to the settings of your mobile device, find Developer options and turn on the USB debugging.
   Tip:
   The steps turn on Developer options vary from different models of Android device. You may check it from internet or contact us for the detailed steps. We take Samsung Galaxy S8+ as an example.

3. Go to settings of your Android device, then tap About phone > Software information > Build number.

4. Continuously tap on Build number for several times until it shows Developer mode had been turned on.

5. Get back to the settings of your mobile device, it will show Developer options.

6.  Connect your Android mobile device to the USB port of the projector with the ORIGINAL USB cable.

7. Tap OK when your Android mobile device pops out the window of Allow USB debugging? Then the display of your Android mobile device will be mirrored to the wall/screen after a while.

Notes :

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring data.
2. Some mobile devices may not support screen mirroring due to the compatibility.
3. Some Android mobile devices may only transfer the display without audio due to the protocol restrictions.

SPECIFICATION

PROJECTION DISTANCE &SIZE

• The recommended projection distance varies with different projection contents.Please adjust the distance between the wall/screen and the projector as needed.
• Ambient darkness will improve the clarity of the projected images.

TROUBLESHOOTING GUIDE

• Blurry Image
  • Adjust focus ring/keystone
  • Projector and screen/wall must be in effective distance.
• Remote Unresponsive
  • Make sure remote points at IR receiver directly.
  • Do not cover IR receiver.
  • Try a new pair of AAA batteries.
• Mobile Connection
  • iOS: Genuine lighting to HDMI cable
  • Android: Micro USB to HDMI adapter/Type C to HDMI cable
• Upside Down Images
  • Go to Menu > Picture > Reduce Display Size to adjust the image site.
• Auto Off
  • Go to Menu > Time > Sleep Timer to adjust the time period before the projector automatically turns off.

CAUTION

• To avoid replacement of battery with and incorrect type.
• Don´t dispose of a battery into fire or a hot oven, or mechanically crush or cut a Battery.
• Don´t leave a battery in an extremely high temperature surrounding environment.
• To avoid battery subjected to extremely low air pressure.
• The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
• The symbol indicates for indoor use only.
• Class II equipment
• The symbol indicates DC voltage
• The symbol indicates AC voltage
• RECYCLING

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

• Importer: Alza.cz a.s.
• Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
• CIN: 27082440

Subject of the declaration:

• Title: HD Projector
• Model / Type: PJ202

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

• Directive (EU) 2014/53/EU
• Directive (EU) 2011/65/EU as amended 2015/863/EU

Prague, 28.12.2021

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• alza.at
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• Alza | Alza.fr
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>