HECATE EDF700006 True Wireless Gaming Earbuds User Manual
- June 6, 2024
- HECATE
Table of Contents
GM5
TRUE WIRELESS GAMING EARBUDS
Product description and accessories
Note: Images are for illustrative purposes only and may differ from the
actual product.
Input:
5V 50mA (earbuds)
5V 500mA (charging case)
Take earbuds out
Take the earbuds out of the charging case and tear insulating films off.
Charge
For initial use, place the earbuds in the charging case and close the case, then connect the case to power source with the included Type-C charging cable for charging.
Charge the earbuds
- You may hear a warning tone when the earbuds are at a low battery level, please place the earbuds in the case for charging;
- Ice blue indicator steady lit = charging
- Ice blue indicator off = fully charged
Charge the charging case
- Open the charging case to show its battery level. If the red light of the charging case flashes rapidly, it indicates the charging case is at a low battery level, please charge it in time.
- LED light of the charging case flashing = charging
- Three LED lights steady lit = fully charged
Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in a fire to prevent an explosion. If it is not used for long periods of time, please charge the product with a lithium battery every three months.
Power on/off
Automatically
- Power on automatically when taken out of the charging case;
- Power off automatically while placed in the charging case.
Manually
- When powered off, respectively press and hold the touch zones of the left and right earbuds for around 3 seconds to power on;
- When powered on, respectively press and hold the touch zones of the left and right earbuds for around 5 seconds to power off.
Bluetooth connection
Two earbuds mode
- For initial use, take the earbuds out of the charging case and they will auto-on (the white lights lit for around 2 seconds); then the left and right earbuds will auto-pair with each other, after pairing is successful, the earbuds will enter Bluetooth pairing state (the white and ice blue lights of the earbuds flashing alternately);
- Set Bluetooth device to search for and connect to “HECATE GM5”, after pairing is successful, the indicators of the earbuds will flash once per around 4 seconds.
One earbud mode
- If using one earbud only, please take the left or right earbud out of the charging case, and refer to the procedures mentioned in “Two earbuds mode” to pair with Bluetooth devices.
Reconnect automatically
- Take the earbuds out of the charging case, they will auto-connect to the Bluetooth device connected last time.
- When the earbuds are disconnected from the Bluetooth device for not at the effective distance, they can auto-connect to the Bluetooth device again if return to the effective distance within 5 minutes.
TWS pairing of the left and right earbuds The left and right earbuds have finished TWS pairing before leaving the factory. If the wireless connection fails to resume, please follow the steps below to re-pair:
- After powered on, simultaneously double click the touch zones of the left and right earbuds to start TWS pairing(the white lights of the earbuds flashing in a breathing pattern);
- After TWS pairing is done, the earbuds will enter a Bluetooth pairing state (the white and ice blue lights of the earbuds flashing alternately).
- Please refer to the procedures mentioned in “Two earbuds mode” to pair with Bluetooth devices again.
Functional operation
Music playback mode L Left earbud
L Left earbud
R Right earbud
Low-latency game mode
R Right earbud(music mode)
Enable/disable ambient sound mode
L Left earbud
L
R Call mode Left/right earbud
**L**
Voice assistant
Except when you are in a conversation, quadruple click the touch zone of the
left earbud to enable the voice assistant function(please ensure the connected
Bluetooth device supports this function).
Restore to factory settings (use with caution)
Restoring to factory settings will clear all pairing records of the earbuds.
- When powered off, respectively press and hold the touch zones of the left and right earbuds for 8 seconds; when the indicator is steady lit, double click the touch zone and the indicator flashes twice, then the factory settings have been restored.
- Please refer to the procedures mentioned in “TWS pairing of the left and right earbuds” to complete TWS pairing again.
FAQs
No sound
- Check if the earbuds are operating.
- Check if the earbud’s volume is at an appropriate level.
- Check if the earbuds are correctly connected with the Bluetooth device.
- Check if the earbuds are operating within a normal working range.
The call quality of the earbuds is not good.
- Check if the Bluetooth device is in an area with a strong signal.
- Please ensure the earbuds are within an effective distance (10m) and no obstacle between the earbuds and Bluetooth device.
When playing music, cannot control pause/play/previous track/next track via the earbuds.
- Please ensure the paired Bluetooth device supports AVRCP (Audio/Video Remote Control Profle) profle.
Maintenance
- Do not put the product in places exposed to the sun or with high temperatures. The high temperature will shorten the service life of electronic components, damage batteries, and make plastic components deformed.
- Do not put the product in cold places to avoid damaging the internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with a hard object to avoid damaging the internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting the facade.
Model: EDF700006
Edif is International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.
www.edifier.com
©2020 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, the information
contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown in this manual may be slightly dfferent from the
actual product. If any difference is found, the actual product prevails.
References
- Headphones, Speakers | A Passion for Sound -【Edifier】
- HECATE- Discover The New Gaming World | Headphone, Speaker, Earbuds
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>