HECATE G200 Bluetooth Magnetic Speaker User Guide

June 1, 2024
HECATE

HECATE G200 Bluetooth Magnetic Speaker

HECATE-G200-Bluetooth-Magnetic-Speaker-product

Specifications

  • Model: EDF701009
  • Product Type: Bluetooth Magnetic Speaker
  • Dimensions: 80x80mm
  • Battery Life: Up to 80 hours at 60% volume

Product Usage Instructions

Controls

  • Power on: Press and hold the power button for 3 seconds (X1)
  • Power off: Press and hold the power button for 5 seconds (X2)
  • Switch game/music mode: Press and hold the corresponding button for 5 seconds (X3)
  • Play/pause: Press the play/pause button
  • Bluetooth pairing: Follow the steps below for Bluetooth pairing

Bluetooth Pairing

  1. For initial use, the speaker will auto-enter Bluetooth pairing mode. Select HECATE G200 in your device settings to connect.
  2. The speaker can auto-connect to devices that have been paired before. If not connected to any devices in 5 seconds, the speaker will enter Bluetooth pairing mode. If failed to connect, the speaker will automatically turn off in 10 minutes.
  3. In OFF state, press and hold the Bluetooth pairing button for 5 seconds to re-pair with the speaker.

FAQ

  • Q: How do I know if the speaker is in Bluetooth pairing mode?
    A: The speaker will indicate it is in pairing mode by flashing a specific light pattern.

  • Q: Can I use the speaker while it is charging?
    A: Yes, you can use the speaker while it is charging. However, it is recommended to let it charge fully for optimal battery performance.

  • Q: How do I switch between game and music mode?
    A: Press and hold the corresponding button for 5 seconds to switch between game and music mode.

Product description and accessories

HECATE-G200-Bluetooth-Magnetic-Speaker- \(1\)

Note

  • Images are for illustrative purposes only and may differ from the actual product.
  • For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly different from actual product. If any difference is found, the actual product prevails.

Controls

HECATE-G200-Bluetooth-Magnetic-Speaker-01

Bluetooth pairing

  1. For initial use, the speaker will auto-enter Bluetooth pairing mode. Select “HECATE G200” in your device setting to connect.
  2. The speaker can auto-connect to devices that have been paired before. If not connected to any devices in 5s, the speaker will enter Bluetooth pairing mode. If failed to connect, the speaker will automatically turn off in 10 minutes.
  3. In OFF state, press and hold the ” ” button for 5s to re-pair with the speaker.

For more information, please visit our website: www.edifier.com

HECATE-G200-Bluetooth-Magnetic-Speaker- \(2\)

Model: EDF701009

Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2024 Edifier International Limited. All rights reserved.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.

NOTICE
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.
Hereby, Edifier International Limited declares that the radio equipment type EDF701009 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html

CAUTION

  • Risk of explosion if the battery is replaced by an incorrect type;
  • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
  • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
  • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

FCC statement

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation. IC statement:CAN ICES-003(B)/NMB-003(B)

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no- collocation statement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

  • Declaration for EU
  • Frequency Band: 2.402GHz~2.480GHz
  • Power Output: ≤ 8dBm(EIRP)
  • There is no restriction of use
  • Model: EDF701009
  • FCC ID: Z9G-EDF235
  • IC: 10004A-EDF235

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals