Roland V-8HD Remote iPad App Owner’s Manual
- June 6, 2024
- Roland
Table of Contents
V-8HD Remote
Owner’s Manual
V-8HD Remote is a dedicated iPad application for the Roland V-8HD. Connecting the V-8HD and the iPad via USB lets you operate the V-8HD from V-8HD Remote.
- V-8HD Remote can be used with V-8HD units that are running version 1.03 or later. Be sure to update your V-8HD unit to the latest version.
Connecting the iPad and the V-8HD
-
Connect the V-8HD’s USB port to the iPad.
Using a commercially available connection or an adaptor cable (Lightning-USB camera adaptor), connect the unit to the iPad.
-
Turn on the power to the V-8HD.
Starting and Quitting V-8HD Remote
Starting the V-8HD Remote
- Turn on the power to the iPad on which V-8HD Remote is installed.
- Tap the V-8HD Remote icon.
V-8HD Remote starts, and the V-8HD Remote screen appears
NOTE
If the connection status does not change to “ONLINE” (connected), re-check the
connection between the iPad and the V-8HD unit.
Quitting
- Press the Home button on the iPad.
V-8HD Remote ends, and the Home screen reappears.
Part Names and Functions
For more details on setting items, refer to the V-8HD Reference
Manual, “Menu List” (PDF).
Name | Explanation |
---|---|
1 | Display-change button |
2 Operation panel | Operates the operation panel on the V-8HD by remote |
control.
---|---
A| [OUTPUT FADE] knob| When you tap the function name shown at the lower left
or lower right of the
knob, a window opens, allowing you to change the function of turning the
knob left or right.
B| FREEZE [SETUP] button| Accesses the freeze function setup screen.
C| PinP 1 [SETUP] button| Accesses the PinP 1 and PinP 2 setup screen.
D| PinP 2 [SETUP] button| Accesses the DSK setup screen.
E| DSK [SETUP] button
F| [REC CONTROL] button| If a recorder that supports the “HDMI REC TRIGGER”
function is connected to the output of the V-8HD, this controls the start/stop
for video recording on the recorder.
G| AUTO-SWITCHING [SETUP] button| Accesses the DSK setup screen.
AUTO SWITCHING [ON] button| Turns the auto-switching on/off.
H| TRANSITION TYPE
[MIX] [WIPE] buttons| Switches to the MIX or WIPE setting items.
TRANSITION TIME [–] [+] buttons| Specifies the video transition time.
Name| Explanation
---|---
I| [INPUT ASSIGN] button| Accesses the INPUT ASSIGN (input source
selection) setup screen.
J| SPLIT/VFX A [SETUP] button| Accesses the SPLIT/VFX A and SPLIT/VFX B setup
screen.
K| SPLIT/VFX B [SETUP] button
L| [CUT] button| When you tap the function name shown above or below the
button, a window opens, allowing you to change the function of the button.
For the [CUT] button:
If the function is set to something other than “CUT,” the button name
indication changes.
For the [AUTO] button:
If the function is set to something other than “AUTO,” the button name
indication changes.
[AUTO] button
3 PRESET MEMORY
[1]–[8] buttons| When you tap a button (button lit), the saved settings are recalled.
-
The following settings are not saved in memory. Only one set of these settings are saved for the V-8HD unit.
•RESET MEMORY menu
•CTL/EXP menu
•STILL IMAGE menu
•SYSTEM menu
[SAVE] button| If you tap the [SAVE] button (making it light) and then tap a [1]–[8] button, the state of the operating panel is saved to the memory you tapped.
[INIT] button| If you tap the [INIT] button (making it light) and then tap a [1]–[8] button, the content of the memory you tapped is initialized.
4 CONNECT| This displays the connection status of the V-8HD and iPad.
If this is “ONLINE,” you can remotely control the V-8HD from V-8HD Remote.
Connected Not connected
Name| Explanation
---|---
5 [MENU] button| This displays the settings screen (menu) of the V-8HD unit.
Tap the [Back] button to return to the previous screen. -
Some of the parameters cannot be edited from V-8HD Remote.
6 STILL IMAGE OUTPUT
[1]–[8] buttons| When you tap a button (button lit), the output video switches to the specified still image.
7 Audio mixer
[SETUP] button| Selects the channel for which you can edit the character of the sound.
The setup screen for the channel selected by the [SETUP] button appears.
Level meter| These display the volume levels of input/output audio.
FOLLOW indicator| This is lit if the audio follow function is turned on.
[SOLO] button| Turns the solo function on/off.
[MUTE] button| Turns the mute function on/off.
Audio level faders| Adjusts the volume level of input/output audio. -
Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries.
-
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
© 2020 Roland Corporation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>