D-Link DCH-S163 Battery-powered Remote Water Sensing Pod Add-on Installation Guide
- June 6, 2024
- D-Link
Table of Contents
D-Link DCH-S163 Battery-powered Remote Water Sensing Pod Add-on Installation Guide
Setup Code
This is your device’s Setup Code. Please keep it as future reference
for your device.
Simple Setup
Note: Make sure that your DCH-S162 hub is set up and functioning properly
beforehand.
(1) Get the mydlink app on the App Store or on Google Play. Launch the
app, then Sign In or Create a New Account.
(2) Tap then tap Add a Device.
(3) Tap Scan , then scan the Setup Code located in the Setup Code section. Follow the app instructions to set up your device with your DCH-S162 hub.
LED Behavior
FAQ
What do I do if my device is not working properly?
Reset and reinstall your device. During installation, ensure that:
- Your router is connected to the Internet and Wi-Fi is enabled
- Your mobile device is connected to your router’s Wi-Fi and Bluetooth is enabled
- Your mydlink device is in range of your Wi-Fi network
- Ensure that your DCH-S162 hub is powered on and installed correctly
How do I reset my device?
DCH-S163: Press and hold the Reset button until it blinks red.
How do I install additional DCH-S163 units?
In the mydlink app, tap then tap Add a Device. Tap Scan, then scan the Setup Code located on the device. Follow the app instructions to set up the additional DCH-S163 units with your DCH-S162 hub.
Need Help?
Having trouble installing your new product? D-Link’s support website contains live chat, video tutorials, commonly asked questions, the latest user documentation and software updates for D-Link products.
Contact Us http://support.dlink.ca
800-361-5265
Setup and How To videos available here: YouTube.com/DLinkTutorials
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>