LASER PB-CJ6000 Emergency Power Bank User Guide
- June 6, 2024
- Laser
Table of Contents
PB-CJ6000
QUICK START GUIDE
Product Connection and Use
What’s in the box
Back up Battery, Charger alligator clip cables, 3 in 1 USB charging cable, Cigarette Lighter USB Charger, Quick start guide (this document)
Indicator Lights
Indicator Lights| Flashing Lights| No Light| 1 Light| 2 Lights| 3 Lights| 4
Lights
---|---|---|---|---|---|---
State of Charge| Charging| 0%| 25%| 50%| 75%| 100%
On/Off button
To turn the device on, press the POWER BUTTON.
To turn the LED LIGHT on, press the POWER BUTTON twice.
To turn the LED LIGHT off, press repeatedly (refer to the diagram on the back
of the battery)
Charging the Power Bank
Using a USB mains powered charger, plug the cable into the PW-CJ6000 (mini-USB end) or you can use the car charger provided, however, this will take longer than the mains charger. The LED light display will then start to flash. It is recommended that you charge the unit overnight before the first use, then top up the unit as needed.
Charging from your power bank
Once you have connected your device for charging (an iPhone for example),
press the power button on the power bank.
The charging bar on your power bank will then illuminate and charging will
begin.
Step 1: Connect positive & negative clips to a car battery
Step 2: Connect battery clips to the jump start battery
NOTE: TAKE NOTE OF THE BATTERY POLARITY BEFORE CONNECTING
Step3: Start car normally
Step 4: Remove battery clips from the jump start battery
Product Specification
USB OUTPUT – 5V 2.0AMP: Suits any USB chargeable device such as iPhone, iPad, Samsung P1000, Moto MH900, and MID Contains intelligent protection for over- charge, over-discharge, and short-circuit protection
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from
defects in materials and workmanship for 12 months, from the date of purchase,
provided that the product is used in accordance with accompanying
recommendations or instructions where provided. The benefit of this warranty
is in addition to your rights under the Australian Consumer Law and to other
rights and remedies of the consumer under a law in relation to the goods or
services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your
choice of a repair, exchange (where possible), or refund (within the Dead on
Arrival period) for this product if it becomes defective within the warranty
period. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse, normal wear and tear, neglect, or
improper storage. Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of
purchase cannot be verified, your place of purchase or Laser will make an
assessment based on the date of manufacture, the condition of the Laser
Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the
fault and repair, replace or fund the product as per their store refund or
warranty policy. Step 2b): If your place of purchase cannot be contacted, then
you can contact Laser. Customer Service with details of your defective Laser
Product: Phone: (02) 9870 3388; or Email:
support@laserco.com.au or online
www.laserco.com.au/warranty (click on
“Consumers (End Users)”).
Our business address is at 1/6-8 Byfield Street, North Ryde, NSW 2113. Step 3:
The laser will issue you with a Return Authorisation (RA) number within 48
hours. When requested, send us the defective Product and a copy of your
receipt. The laser will cover the cost of the return delivery. Step 4: Wait
for us to contact you. Once we have received your defective Laser Product for
inspection, we will inform you of our assessment of your claim within 7 days.
When we contact you, we will firstly let you know whether you have a valid
claim under this Warranty, and if so, we will inform you whether your
defective Laser Product will be replaced or repaired, together with the number
of days you can expect to wait to receive your replaced or repaired Laser
Product. Step 5:
For further details on warranty coverage and returns, please check the Terms
and Conditions for Warranty Returns section on
http://www.laserco.com.au/warranty
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>