JOCEL JTV013231 Fan Heater User Manual

JOCEL JTV013231 Fan Heater

SPECIFICATIONS

• Rated Voltage: 23OV
• Rated Input: 1000W/2000W
• Rate frequency: 50/60Hz

MAIN FEATURES

1. It has two functions. Cool and warm wind.
2. You can choose freely according to quarters
3. Positions:
4. I 1000W
5. II 2000W
6. -Wind
7. Temperature control can keep room some temperature.

OPERATION

1. Insert the plug into the socket, put on the power and indicator light is showed. The machine is ready.
2. Turn the temperature knob to the maximum position clockwise
3. 3Tu rn the function adjust knob to ”switch then cool wind is out.
4. Turn “function adjust knob” to “I” switch then warm wind is out its frequency is 1000W.
5. Turn “Function adjust knob” to “II” switch then the warm wind is out and its frequency is 2000W.
6. Turn “Funct ion adjust knob” to “0” switch. Then it stops work and is ready.

CAUTION DURING OPERATION

1. Before use, please inspect the power and socket capacity if it is in line with this machine ( 23 0 V).
2. No cover when use.
3. Do not p ut it under the socket.
4. Do not use in the flammable and explosive gas environment. Do not put it near it.
5. Do not put stick or other object in it lest touch the power and damage the machine.
6. Child and losing consciousness control should be taken care by grown up then operate.
7. Provided m achine part has not used for a long time you should unplug the power socket and take off the switch.
8. It has enough space around Space: bottom and two sides: 50cm.Front:120cm
9. Do not use in the bath room.
10. Caution: outer shell can be heated during use. If i t was heated higher than safety installment, it would cut off automatically.
11. Please open wind for 3 minutes before stop it. In order to keep it durable.
12. When you get trouble, don’t repair and please sent it the Technical Assistance.

CONSTANT TEMPERATURE INDICATOR

When room temperature is up to pointed temperature it will keep air temperature at fixed level by on/off.

During use you can get ideal temperature by it.

• First, turn it to the max position (clockwise to turn until the knob stop)
• Once feel comfortable for air around, then it turn (anticlockwise) the temperature back until it closes.
• The temperature can keep air.

HIGH-TEMPERATURE PROTECT DEVICE

In order to avoid damage and danger because of high temperature, it is equipped with hot temperature pr otect device. When the heating setting is too hot and it can cut off automatically.

If it happened

• Turn function adjust knob to “0”
• Pull out the plug;
• Make it cool 5 10mn;
• Turn it on again.

DAILY MAINTENANCE

1. Turn “function adjust knob” to “0” switch and turn off the power.
2. Pull out the plug.
3. Make it cool down.
4. Rub it with clean water and medium detergent; do not splash the mater into it.
5. Do not rub with gasoline, acid and alkali, in order to avoid fade and damage appearance.
6. When it is stored, it should b e cooled and put in the box and in a dry place.

FAILURE CONFIRMATION

The fan doesn’t work even after the selection of warm or hot wind function

1. Inspect whether the plug is not excellent or so.
2. Does the constant temperature adjust knob is not adjusted to the max? (clockw ise to the bottom)
3. The function adjust knob is not turned so.

GENERAL WARRANTY TERMS

1. The warranty is valid only on presentation of invoice of purchase.
2. This WARRANTY is limited exclusively to parts substitution ineffective due to faulty manufacture, made in our workshops.
3. The elimination of several faults of the scope of the guarantee is made for repair or replacement of defective parts, according to the discretion of our technical services. Defective parts are our property.
4. Are not covered under warranty damage caused by transportation, neglect or poor use, improper assembly or installation, as well as external influences such as: lightning strikes or power, flooding, humidity, etc.
5. Lose warranty, all appliances that are not being used according to the instructions, or connected to FEEDING NETWORKS not guarantee a constant voltage of 220/240V.
6. The warranty does not cover damages for personal injury or damage caused directly or indirectly in any capacity whatsoever.
7. This warranty terminates when it is found to have been undergoing repairs, alterations or interventions by any person not authorized by Jocel.

THE WARRANTY EXPIRES

1. If the appliance has not been installed by an Accredited Technician.
2. Exceeded the period of 2 years for home appliances and 06 months for industrial appliances, warranty expires and assistance will be made by charging the costs of manpower, according to current fees.
3. With the modification or disappearance of the nameplate of the appliance.

TECHNICAL ASSISTANCE

For technical assistance request, our services are available through the following contacts:

• Telef: 00 351 252 910351
• Fax: 00 351 252 910367
• Email: assistencia@jocel.pt
• http://www.jocel.pt

HEADQUARTERS

• Rua Alto do Curro, n.º 280
• 4770 569 S. COSME DO VALE V.N. de FAMALICÃO
• Telef: 252 910 350/2
• Fax: 252 910 368/9
• email: jocel@jocel.pt
• http://www.jocel.pt

DECLARATION OF CONFORMITY

We declare on our own responsibility that the machine indicated below

• Product: FAN HEATER
• Brand: JOCEL
• Model: JTV013231

Complies with the following European directives and standards implementation

• Low Voltage: 20 14 35 : EU EN 60335 1:2012 +A C:2014+A11:2014+A13:
  • 2017 +A1:2 019+A14:2019+A2:2019
  • EN 60335 2 30:2009+A11:2012
  • EN 62233:2008
• Electromagnetic Compatibility: 20 14 30 EU: EN 55014 1: 2017
  • EN 55014 2: 2015
  • EN 61000 3 2: 2014
  • EN 61000 3 3:2013
• Country of Origin: R.P.C.

References

• JOCEL Electrodomésticos
• JOCEL Electrodomésticos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>