GAOMON 615B 12V Ride on Car Licensed Lamborghini Veneno Electric Car for Kids Instruction Manual

GAOMON 615B 12V Ride on Car Licensed Lamborghini Veneno Electric Car for Kids

Safety Information

WARNING: Must be assembled by an adult.

• Suitable for 3+ Years
• Maximum user weight: 30 kg

Read and understand this entire manual before using!

Please keep this manual for future reference as it contains important information. Before first time use, charge the battery for at least 4-6 hours, but no more than 10 hours.

About Your New Vehicle

On the purchase of your new Ride-On.

This ride-on car will provide your child with many miles of riding of enjoyment.

To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.

Follow the recommendations in this manual, they are designed to improve the safety and operation of your ride-on car and its rider.

Specification

• Suitable age: 3+ Years
• Charge time: 8-12 hours
• Load capacity: Under 30 kg
• Size of car: 1110610450 mm
• Speed: 3-7 km/h

BATTERY INFORMATION

• Non-rechargeable batteries are not to be recharged.
• If removable rechargeable batteries are used, the are only to be charged under adult supervision.
• Remove rechargeable batteries from the product before charging.
• Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode.
• Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Battery leakage and corrosion can damage this product. Dispose of batteries safely.
• Never short circuit the battery terminals.

Parts List

• Assembly tools required (not included): Screwdriver
  

Parts Diagram

Safety

WARNING:

• CHOKING HAZARD! Not suitable for children under 36 months.
• Must be assembled by an adult.
• To reduce the risk of injury, adult supervision is required.
• Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than 1 rider.
• Power supply or battery charger used with the electric toy shall be regularly examined for damage to the supply cord, plug, enclosure or other parts, and in the event of damage, it shall not be used not be used until the damage has been repaired.
• Use only battery  and charger specified by the manufacturer.
• The battery on the vehicle is not replaceable.
• This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. Protective equipment should be worn.
• Always wear shoes, always sit on the seat.
• Not to be used in traffic.
• This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user weight is 30 kg.
• This toy has no brake.

Rules for Safe Riding

• Keep Children within Safe Riding Areas.
• Use the toy only on flat surfaces. Such as inside your house, garden or playground.
• Never use in the dark. A child could encounter unexpected obstacles and have an accident.
• Operate the vehicle only in the daytime or a well-lit area.
• It is prohibited to change the circuit or add other electric parts
• Inspect wires and connections of the vehicle periodically. Do not let any child touch the wheels or be near them when the car is moving. This vehicle has adjustable play seat belts. Please instruct children how to tie the safety belt before using, guarantee the security

Attach the Front Wheels

Turn the vehicle body upside down. Remove all the parts from the front axle.

1. Slide a 010 washer onto the front axle.
2. Slide a front wheel onto the front axle.
3. Slide a 010 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner.
5. “Snap” the wheel cover to the front wheel.

Repeat for the other front wheel.

Attach the Rear Wheels

1. Slide a driving wheel onto the rear axle.

2. Slide a 010 washer onto the rear axle.

3. Tighten a lock nut to the end of the rear axle with a spanner.
   Repeat for the other rear wheel. Tip: An extra spanner has been provided to hold the Lock Nut on the other side of the rear axle while tightening the Lock Nut on the other side. DO NOT over tighten.

4.  “Snap” a wheel cover to each rear wheel.
   5-6. Fit the towing wheel to the vehicle body, insert and tighten a 04×12 screw with a screwdriver. Repeat for the other towing wheel.

Attach the Steering Wheel, Windshield & Mirrors

Turn the vehicle body upright.

1. Plug the sound unit connector on the steering wheel into the connector on the vehicle body.
2. Fit the steering wheel to the end of the steering column.
3. Line up the holes on the steering wheel with the holes on the steering column, insert
4. Fasten a lock nut on the opposite end of the screw with a screwdriver.
5. Insert the tabs on the windshield into the slots on the vehicle, push until you hear “click” into place.
6. Fit side mirrors to the vehicle body.
   

Attach the Seat & Connect the Power Supply

1. Plug the Red connector on the vehicle into the red connector on the battery.
2. Fit the hook on the rear side of the seat back into the hole on the rear side of the body,
3. Press and hold the two seat lock buttons on the body to fit the seat to the body

Attach the Rear Spoiler

1. Fit the spoiler wings to the spoiler support.
2. Insert two 04×12 screws through the spoiler wing R and into the spoiler wing L. Tighten with a screwdriver.
3. Fit the spoiler assembly to the vehicle body.
4. Insert and tighten two 04×12 screws to secure it with a screwdriver

Use Your New Ride On

1. Power button: Turn the product on and off.
2. Forward/Stop/Reverse lever: Changes the direction that product moves from forward to reverse.
   • To move the product forward, shift the lever to top position.
   • To move the product backward, shift the lever to down position.
   • Shift the lever to middle position, the product will not move.
3. Throttle pedal: Applies power (speed) to the product.
4. To move the product, press the pedal do1wn.
5. To brake or slow down, release pressure from the pedal.
6. Horn button: Press for horn playing.
7. R/C-Manual switch (Optional)
   This switch must be operated by an adult. If it is locked, please turn the knob to the unlocked position and open the cover.
   Change operating mode, throttle control or remote control.

IMPORTANT

Always stop vehicle when changing the speed or direction to avoid damage the gears and motor.

Use Your New Ride On

• A. Previous /Long press for Volume B. Play /Long press for Pause C. Next /Lone press for Volume +
• D. Rocking button (Optional): Turn rocking mode on and off. Product cannot move under this mode.
• E. Lights button: Turns the lights on and off.
• F. High speed button: Operates the product to move in high speed.
• G. Low speed button: Operates the product to move in low speed.
• H. Mode button: Change audio input
• I. Device input 1
• J. Device input 2
• K. Digital voltmeter: It displays the power level of the battery when the product is stop.

Use the Remote Controller

Attach the batteries of controller

Lift the battery compartment door on the back of the controller and insert two AAA(LR03) batteries.

HINT: Batteries not included. Refer to the Battery Information on the page 1.

1. Build connection
   Long press the forward and reverse buttons for 3 seconds, and the speed indicator flashes. Then power on the vehicle, the speed indicator goes to long bright, means the connection successful. If the speed indicator no response, means the connection failed. Replace the batteries and retry.

2. Brake button
   Press the button to stop the vehicle, press it again to release the brake.

3. Speed select button
   The switch operates the vehicle to move in low, normal or high speed.
   HINT: This switch won’t work while your vehicle moves reverse.

NOTE:

• Leave the remote controller idling for about 10 seconds, it will shut down automatically.
• Rebuild connection when you replace the batteries of the remote controller.

Charging

WARNING!

ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERY!

WARNING!

This product with Charging Protection: when charging, all functions will be cut off!

Only an adult can charge and recharge the battery!

• The POWER SWITCH must be turned in OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than 20 hours at most.
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion.
• Do not use the battery or charger for any other product
  

How to charge the battery

1. Open the charging cover (Below the seat. If it is locked, please turn the knob to the unlocked position and open the cover). Plug the charger port into the charger socket.
2. Plug the charger plug into a wall outlet. The battery will begin charging.

Troubleshooting Guide

firmly plugged into each other. If wires are loose around the motor. Contact your distributor please.
Battery is dead| Replace battery, contact your distributor please.
Electrical system is damaged| Contact your distributor please.
Motor is damaged| Contact your distributor please.
Vehicle does not run very long| Battery is under charged| Check that the battery connectors are firmly plugged into each other when recharging
Battery is old| Replace battery, contact your distributor please.
Vehicle runs sluggishly| Battery low on power| Recharge battery, contact your distributor please.
Battery is old| Replace battery, contact your distributor please.
Vehicle is overload| Reduce weight on vehicle.
Vehicle is being used in harsh conditions| Avoid using vehicle in harsh conditions ,see .
Vehicle needs a push to go forward| Poor contact of wires or Connectors| Check that the battery connectors are firmly plugged into each other. If wires are loose around the motor, contact your distributor please.
“Dead Spot” on motor| A dead spot means the electric power is not being delivered to the terminal connection and the vehicle needs repair. Contact your distributor please.
Difficult shifting from forward to reverse or vice-versa| Attempting to shift while the vehicle is motion| Completely stop the vehicle and shift, see <Use Your New Vehicle>
Loud grinding or clicking noises coming from motor or gear box| Motor or gears are damaged| Contact your distributor please.
Battery will not recharge| Battery connector or adapter connector is loose| Check that the battery connectors are firmly plugged into each other.
Charger not plugged in| Check that the battery charger is plugged into a working wall outlet.
Charger is not working| Contact your distributor please.
Charger feels warm when recharging| This is normal and not a cause for concern|

Completely read through this manual and the troubleshooting guide table before calling. If you still need help resolving the problem Contact your distributor please.

Maintaining

1. It is parents’ responsibility to check main parts of the toy before using, must regularly examine for potential hazard, such as the battery, charge, cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed.
2. Make sure the plastic parts of the vehicle are not cracked or broken.
3. Occasionally use a lightweight oil to lubricate moving parts such as wheels.
4. Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
5. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
6. Recharge the battery after each use. Only an adult can handle the battery. Recharge the battery at least once a month when the vehicle Raider is not being used.
7. Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric system and battery.
8. Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners
9. Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving parts, motors or the electric system.
10. When not using, all the electrical source should be turn off. Turn off the power switch and disconnect the battery connection.

Battery Fuse

The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact your distributor please.

• To avoid losing power, follow these guidelines: Do not overload the vehicle.
• Do not tow anything behind the vehicle.
• Do not drive up steep slopes.
• Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
• Do not drive in very hot weather, components may overheat.
• Do not allow water or other liquids to come in contact with the battery or other electric components.
• Do not tamper with the electric system. Doing so may create a short, causing the fuse to trip.

Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.

Disposal Of Battery

• Your sealed lead-acid battery must be recycled or disposed of in an environmentally sound manner.
• Do not dispose of your lead-acid battery in a fire. The battery may explode or leak.
• Do not dispose of a lead-acid battery in your regular, household trash. The incineration, land filling or mixing of sealed lead-acid batteries with household trash is prohibited

The “Lamborghini” and “Lamborghini Bull and Shield” trademarks, copyrights, designs and models are used under license from Automobile Lamborghini S.p.A, Italy.

Licensee: PINGHU CITY XIAO MING XING CHILDREN’S PRODUCTS CO., LTD

Manufacturer: PINGHU XIAO MING XING CHILDREN’S PRODUCTS CO., LTD
Manufacture Address: BLDG 1., NO.1888 CANGDONG ROAD, XINCANG TOWN, PINGHU CITY, ZHEJIANG, CHINA

Customer Support

US IMPORTER:

Company: Cascade Toys and Games LLC
Address: 14550 Interurban Avenue South, STE A100, Tukwila, WA 98168 US
Email: support@hetoy.net

Made in China

Documents / Resources

| GAOMON 615B 12V Ride on Car Licensed Lamborghini Veneno Electric Car for Kids [pdf] Instruction Manual
615B 12V Ride on Car Licensed Lamborghini Veneno Electric Car for Kids, 615B, 12V Ride on Car Licensed Lamborghini Veneno Electric Car for Kids, Licensed Lamborghini Veneno Electric Car for Kids, Lamborghini Veneno Electric Car for Kids, Veneno Electric Car for Kids
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>